| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231208074527.50840-4-jaewon02.kim@samsung.com>
Date: Fri, 8 Dec 2023 16:45:26 +0900
From: Jaewon Kim <jaewon02.kim@...sung.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Tomasz Figa <tomasz.figa@...il.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Linus Walleij <linus.walleij@...aro.org>,
Thierry Reding <thierry.reding@...il.com>,
Uwe Kleine-K?nig <u.kleine-koenig@...gutronix.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-serial@...r.kernel.org,
Jaewon Kim <jaewon02.kim@...sung.com>
Subject: [PATCH v3 3/4] pinctrl: samsung: support ExynosAuto GPIO structure
New ExynosAuto series GPIO have a different register structure.
In the existing Exynos series, EINT control register enumerated after
a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET, EXYNOS_GPIO_EMASK_OFFSET).
However, from ExynosAutov920 SoC, the register that controls EINT belongs
to each GPIO bank, and each GPIO bank has 0x1000 align.
This is a structure to protect the GPIO bank using S2MPU in VM environment,
and will only be applied in ExynosAuto series SoCs.
-------------------------------------------------
| original | ExynosAutov920 |
|-----------------------------------------------|
| 0x0 GPIO_CON | 0x0 GPIO_CON |
| 0x4 GPIO_DAT | 0x4 GPIO_DAT |
| 0x8 GPIO_PUD | 0x8 GPIO_PUD |
| 0xc GPIO_DRV | 0xc GPIO_DRV |
| 0x10 GPIO_CONPDN | 0x10 GPIO_CONPDN |
| 0x14 GPIO_PUDPDN | 0x14 GPIO_PUDPDN |
| 0x700 EINT_CON | 0x18 EINT_CON |
| 0x800 EINT_FLTCON | 0x1c EINT_FLTCON0 |
| 0x900 EINT_MASK | 0x20 EINT_FLTCON1 |
| 0xa00 EINT_PEND | 0x24 EINT_MASK |
| | 0x28 EINT_PEND |
-------------------------------------------------
Signed-off-by: Jaewon Kim <jaewon02.kim@...sung.com>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 81 +++++++++++++++++++++--
drivers/pinctrl/samsung/pinctrl-exynos.h | 1 +
drivers/pinctrl/samsung/pinctrl-samsung.c | 3 +
drivers/pinctrl/samsung/pinctrl-samsung.h | 12 ++++
4 files changed, 90 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index 6b58ec84e34b..f798f64b1122 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -56,6 +56,9 @@ static void exynos_irq_mask(struct irq_data *irqd)
unsigned int mask;
unsigned long flags;
+ if (bank->eint_mask_offset)
+ reg_mask = bank->pctl_offset + bank->eint_mask_offset;
+
raw_spin_lock_irqsave(&bank->slock, flags);
mask = readl(bank->eint_base + reg_mask);
@@ -72,6 +75,9 @@ static void exynos_irq_ack(struct irq_data *irqd)
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
unsigned long reg_pend = our_chip->eint_pend + bank->eint_offset;
+ if (bank->eint_pend_offset)
+ reg_pend = bank->pctl_offset + bank->eint_pend_offset;
+
writel(1 << irqd->hwirq, bank->eint_base + reg_pend);
}
@@ -95,6 +101,9 @@ static void exynos_irq_unmask(struct irq_data *irqd)
if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
exynos_irq_ack(irqd);
+ if (bank->eint_mask_offset)
+ reg_mask = bank->pctl_offset + bank->eint_mask_offset;
+
raw_spin_lock_irqsave(&bank->slock, flags);
mask = readl(bank->eint_base + reg_mask);
@@ -139,6 +148,9 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type)
else
irq_set_handler_locked(irqd, handle_level_irq);
+ if (bank->eint_con_offset)
+ reg_con = bank->pctl_offset + bank->eint_con_offset;
+
con = readl(bank->eint_base + reg_con);
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
@@ -221,6 +233,18 @@ static const struct exynos_irq_chip exynos_gpio_irq_chip __initconst = {
/* eint_wake_mask_value not used */
};
+static const struct exynos_irq_chip exynosauto_gpio_irq_chip __initconst = {
+ .chip = {
+ .name = "exynosauto_gpio_irq_chip",
+ .irq_unmask = exynos_irq_unmask,
+ .irq_mask = exynos_irq_mask,
+ .irq_ack = exynos_irq_ack,
+ .irq_set_type = exynos_irq_set_type,
+ .irq_request_resources = exynos_irq_request_resources,
+ .irq_release_resources = exynos_irq_release_resources,
+ },
+};
+
static int exynos_eint_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
@@ -247,7 +271,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
unsigned int svc, group, pin;
int ret;
- svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
+ if (bank->eint_con_offset)
+ svc = readl(bank->eint_base + EXYNOSAUTO_SVC_OFFSET);
+ else
+ svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
group = EXYNOS_SVC_GROUP(svc);
pin = svc & EXYNOS_SVC_NUM_MASK;
@@ -297,8 +324,12 @@ __init int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
if (bank->eint_type != EINT_TYPE_GPIO)
continue;
- bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
- sizeof(*bank->irq_chip), GFP_KERNEL);
+ if (bank->eint_con_offset)
+ bank->irq_chip = devm_kmemdup(dev, &exynosauto_gpio_irq_chip,
+ sizeof(*bank->irq_chip), GFP_KERNEL);
+ else
+ bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
+ sizeof(*bank->irq_chip), GFP_KERNEL);
if (!bank->irq_chip) {
ret = -ENOMEM;
goto err_domains;
@@ -655,6 +686,19 @@ static void exynos_pinctrl_suspend_bank(
pr_debug("%s: save mask %#010x\n", bank->name, save->eint_mask);
}
+static void exynosauto_pinctrl_suspend_bank(struct samsung_pinctrl_drv_data *drvdata,
+ struct samsung_pin_bank *bank)
+{
+ struct exynos_eint_gpio_save *save = bank->soc_priv;
+ void __iomem *regs = bank->eint_base;
+
+ save->eint_con = readl(regs + bank->pctl_offset + bank->eint_con_offset);
+ save->eint_mask = readl(regs + bank->pctl_offset + bank->eint_mask_offset);
+
+ pr_debug("%s: save con %#010x\n", bank->name, save->eint_con);
+ pr_debug("%s: save mask %#010x\n", bank->name, save->eint_mask);
+}
+
void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_pin_bank *bank = drvdata->pin_banks;
@@ -662,8 +706,12 @@ void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
int i;
for (i = 0; i < drvdata->nr_banks; ++i, ++bank) {
- if (bank->eint_type == EINT_TYPE_GPIO)
- exynos_pinctrl_suspend_bank(drvdata, bank);
+ if (bank->eint_type == EINT_TYPE_GPIO) {
+ if (bank->eint_con_offset)
+ exynosauto_pinctrl_suspend_bank(drvdata, bank);
+ else
+ exynos_pinctrl_suspend_bank(drvdata, bank);
+ }
else if (bank->eint_type == EINT_TYPE_WKUP) {
if (!irq_chip) {
irq_chip = bank->irq_chip;
@@ -704,14 +752,33 @@ static void exynos_pinctrl_resume_bank(
+ bank->eint_offset);
}
+static void exynosauto_pinctrl_resume_bank(struct samsung_pinctrl_drv_data *drvdata,
+ struct samsung_pin_bank *bank)
+{
+ struct exynos_eint_gpio_save *save = bank->soc_priv;
+ void __iomem *regs = bank->eint_base;
+
+ pr_debug("%s: con %#010x => %#010x\n", bank->name,
+ readl(regs + bank->pctl_offset + bank->eint_con_offset), save->eint_con);
+ pr_debug("%s: mask %#010x => %#010x\n", bank->name,
+ readl(regs + bank->pctl_offset + bank->eint_mask_offset), save->eint_mask);
+
+ writel(save->eint_con, regs + bank->pctl_offset + bank->eint_con_offset);
+ writel(save->eint_mask, regs + bank->pctl_offset + bank->eint_mask_offset);
+}
+
void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_pin_bank *bank = drvdata->pin_banks;
int i;
for (i = 0; i < drvdata->nr_banks; ++i, ++bank)
- if (bank->eint_type == EINT_TYPE_GPIO)
- exynos_pinctrl_resume_bank(drvdata, bank);
+ if (bank->eint_type == EINT_TYPE_GPIO) {
+ if (bank->eint_con_offset)
+ exynosauto_pinctrl_resume_bank(drvdata, bank);
+ else
+ exynos_pinctrl_resume_bank(drvdata, bank);
+ }
}
static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index 3ac52c2cf998..5049c170e958 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -31,6 +31,7 @@
#define EXYNOS7_WKUP_EMASK_OFFSET 0x900
#define EXYNOS7_WKUP_EPEND_OFFSET 0xA00
#define EXYNOS_SVC_OFFSET 0xB08
+#define EXYNOSAUTO_SVC_OFFSET 0xF008
/* helpers to access interrupt service register */
#define EXYNOS_SVC_GROUP_SHIFT 3
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 79babbb39ced..362e99566919 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1106,6 +1106,9 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
bank->eint_type = bdata->eint_type;
bank->eint_mask = bdata->eint_mask;
bank->eint_offset = bdata->eint_offset;
+ bank->eint_con_offset = bdata->eint_con_offset;
+ bank->eint_mask_offset = bdata->eint_mask_offset;
+ bank->eint_pend_offset = bdata->eint_pend_offset;
bank->name = bdata->name;
raw_spin_lock_init(&bank->slock);
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 9b3db50adef3..789358bcd9c5 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -122,6 +122,9 @@ struct samsung_pin_bank_type {
* @eint_type: type of the external interrupt supported by the bank.
* @eint_mask: bit mask of pins which support EINT function.
* @eint_offset: SoC-specific EINT register or interrupt offset of bank.
+ * @eint_con_offset: ExynosAuto SoC-specific EINT control register offset of bank.
+ * @eint_mask_offset: ExynosAuto SoC-specific EINT mask register offset of bank.
+ * @eint_pend_offset: ExynosAuto SoC-specific EINT pend register offset of bank.
* @name: name to be prefixed for each pin in this pin bank.
*/
struct samsung_pin_bank_data {
@@ -133,6 +136,9 @@ struct samsung_pin_bank_data {
enum eint_type eint_type;
u32 eint_mask;
u32 eint_offset;
+ u32 eint_con_offset;
+ u32 eint_mask_offset;
+ u32 eint_pend_offset;
const char *name;
};
@@ -147,6 +153,9 @@ struct samsung_pin_bank_data {
* @eint_type: type of the external interrupt supported by the bank.
* @eint_mask: bit mask of pins which support EINT function.
* @eint_offset: SoC-specific EINT register or interrupt offset of bank.
+ * @eint_con_offset: ExynosAuto SoC-specific EINT register or interrupt offset of bank.
+ * @eint_mask_offset: ExynosAuto SoC-specific EINT mask register offset of bank.
+ * @eint_pend_offset: ExynosAuto SoC-specific EINT pend register offset of bank.
* @name: name to be prefixed for each pin in this pin bank.
* @id: id of the bank, propagated to the pin range.
* @pin_base: starting pin number of the bank.
@@ -170,6 +179,9 @@ struct samsung_pin_bank {
enum eint_type eint_type;
u32 eint_mask;
u32 eint_offset;
+ u32 eint_con_offset;
+ u32 eint_mask_offset;
+ u32 eint_pend_offset;
const char *name;
u32 id;
--
2.43.0
Powered by blists - more mailing lists