[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231208124332.48636-1-krzysztof.kozlowski@linaro.org>
Date: Fri, 8 Dec 2023 13:43:32 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH] arm64: dts: qcom: pm8550: drop PWM address/size cells
The address/size cells in PWM node are needed only if individual LEDs
are listed. If multi-led is used, then this leads to dtc W=1 warnings:
pm8550.dtsi:65.19-73.5: Warning (avoid_unnecessary_addr_size): /soc@...pmi@...0000/pmic@...wm:
unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm64/boot/dts/qcom/pm8550.dtsi | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index db3d5c17a77d..797a18c249a4 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -64,9 +64,6 @@ pm8550_flash: led-controller@...0 {
pm8550_pwm: pwm {
compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
-
- #address-cells = <1>;
- #size-cells = <0>;
#pwm-cells = <2>;
status = "disabled";
--
2.34.1
Powered by blists - more mailing lists