linux-kernel - [net-next PATCH v4 06/13] net: phy: at803x: move specific at8031 probe mode check to dedicated probe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231208145200.25162-7-ansuelsmth@gmail.com>
Date:   Fri,  8 Dec 2023 15:51:53 +0100
From:   Christian Marangi <ansuelsmth@...il.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Christian Marangi <ansuelsmth@...il.com>
Subject: [net-next PATCH v4 06/13] net: phy: at803x: move specific at8031 probe mode check to dedicated probe

Move specific at8031 probe mode check to dedicated probe to make
at803x_probe more generic and keep code tidy.

Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
 drivers/net/phy/at803x.c | 39 +++++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 20 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 5694c2667b4d..6cb41af31818 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -844,26 +844,6 @@ static int at803x_probe(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
-		int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-		int mode_cfg;
-
-		if (ccr < 0)
-			return ccr;
-		mode_cfg = ccr & AT803X_MODE_CFG_MASK;
-
-		switch (mode_cfg) {
-		case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
-		case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
-			priv->is_1000basex = true;
-			fallthrough;
-		case AT803X_MODE_CFG_FX100_RGMII_50OHM:
-		case AT803X_MODE_CFG_FX100_RGMII_75OHM:
-			priv->is_fiber = true;
-			break;
-		}
-	}
-
 	return 0;
 }
 
@@ -1584,6 +1564,9 @@ static int at8031_parse_dt(struct phy_device *phydev)
 
 static int at8031_probe(struct phy_device *phydev)
 {
+	struct at803x_priv *priv = phydev->priv;
+	int mode_cfg;
+	int ccr;
 	int ret;
 
 	ret = at803x_probe(phydev);
@@ -1597,6 +1580,22 @@ static int at8031_probe(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
+	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
+	if (ccr < 0)
+		return ccr;
+	mode_cfg = ccr & AT803X_MODE_CFG_MASK;
+
+	switch (mode_cfg) {
+	case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
+	case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
+		priv->is_1000basex = true;
+		fallthrough;
+	case AT803X_MODE_CFG_FX100_RGMII_50OHM:
+	case AT803X_MODE_CFG_FX100_RGMII_75OHM:
+		priv->is_fiber = true;
+		break;
+	}
+
 	/* Disable WoL in 1588 register which is enabled
 	 * by default
 	 */
-- 
2.40.1