linux-kernel - [PATCH v5 0/7] Fixes and improvements for RS485

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231209125836.16294-1-l.sanfilippo@kunbus.com>
Date:   Sat,  9 Dec 2023 13:58:29 +0100
From:   Lino Sanfilippo <l.sanfilippo@...bus.com>
To:     gregkh@...uxfoundation.org, jirislaby@...nel.org,
        ilpo.jarvinen@...ux.intel.com
Cc:     u.kleine-koenig@...gutronix.de, shawnguo@...nel.org,
        s.hauer@...gutronix.de, mcoquelin.stm32@...il.com,
        alexandre.torgue@...s.st.com, cniedermaier@...electronics.com,
        hugo@...ovil.com, linux-kernel@...r.kernel.org,
        linux-serial@...r.kernel.org, LinoSanfilippo@....de,
        lukas@...ner.de, p.rosenberger@...bus.com,
        Lino Sanfilippo <l.sanfilippo@...bus.com>
Subject: [PATCH v5 0/7] Fixes and improvements for RS485

The following series includes some fixes and improvements around RS485 in
the serial core and UART drivers:

Patch 1: Do not hold the port lock when setting rx-during-tx GPIO
Patch 2: set missing supported flag for RX during TX GPIO
Patch 3: fix sanitizing check for RTS settings
Patch 4: make sure RS485 is cannot be enabled when it is not supported
Patch 5: imx: do not set RS485 enabled if it is not supported
Patch 6: omap: do not override settings for rs485 support
Patch 7: exar: set missing RS485 supported flag

Changes in v5:

- do not combine the functions that the RS484 GPIOs (as Hugo originally
  suggested)

Changes in v4:

- add comment for function uart_set_rs485_gpios after hint from Hugo
- correct commit message as pointed out by Hugo
- rephrase commit messages
- add patch 7 after discussion with Ilpo

Changes in v3
- Drop patch "Get rid of useless wrapper pl011_get_rs485_mode()" as
  requested by Greg

Changes in v2:
- add missing 'Fixes' tags as requested by Greg
- corrected a typo as pointed out by Hugo
- fix issue in imx driver in the serial core as suggested by Uwe
- partly rephrase some commit messages
- add patch 7


Lino Sanfilippo (7):
  serial: Do not hold the port lock when setting rx-during-tx GPIO
  serial: core: set missing supported flag for RX during TX GPIO
  serial: core: fix sanitizing check for RTS settings
  serial: core: make sure RS485 cannot be enabled when it is not
    supported
  serial: core, imx: do not set RS485 enabled if it is not supported
  serial: omap: do not override settings for RS485 support
  serial: 8250_exar: Set missing rs485_supported flag

 drivers/tty/serial/8250/8250_exar.c |  5 +--
 drivers/tty/serial/imx.c            |  8 -----
 drivers/tty/serial/omap-serial.c    |  8 ++---
 drivers/tty/serial/serial_core.c    | 50 ++++++++++++++++++++++-------
 drivers/tty/serial/stm32-usart.c    |  5 +--
 5 files changed, 47 insertions(+), 29 deletions(-)


base-commit: 33cc938e65a98f1d29d0a18403dbbee050dcad9a
-- 
2.42.0