[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231211201324.652870-1-mathieu.desnoyers@efficios.com>
Date: Mon, 11 Dec 2023 15:13:24 -0500
From: Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
To: Steven Rostedt <rostedt@...dmis.org>
Cc: linux-kernel@...r.kernel.org,
Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
Masami Hiramatsu <mhiramat@...nel.org>,
linux-trace-kernel@...r.kernel.org
Subject: [RFC PATCH] ring-buffer: Fix and comment ring buffer rb_time functions on 32-bit
Going through a review of the ring buffer rb_time functions for 32-bit
architectures, I updated the comments to match the code, and identified
the following issues:
- rb_time_cmpxchg() needs to update the msb last, so it matches
the validation of top and msb by __rb_time_read(). This is fixed by
this patch.
- A cmpxchg interrupted by 4 writes or cmpxchg overflows the counter
and produces corrupted time stamps. This is _not_ fixed by this patch.
- After a cmpxchg fails between updates to top and msb, a write is
needed before read and cmpxchg can succeed again. I am not entirely
sure the rest of the ring buffer handles this correctly.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
Cc: Steven Rostedt <rostedt@...dmis.org>
Cc: Masami Hiramatsu <mhiramat@...nel.org>
Cc: linux-trace-kernel@...r.kernel.org
---
kernel/trace/ring_buffer.c | 64 +++++++++++++++++++++++++++-----------
1 file changed, 46 insertions(+), 18 deletions(-)
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 8d2a4f00eca9..f6ed699947cd 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -576,34 +576,50 @@ struct ring_buffer_iter {
#ifdef RB_TIME_32
/*
- * On 32 bit machines, local64_t is very expensive. As the ring
- * buffer doesn't need all the features of a true 64 bit atomic,
- * on 32 bit, it uses these functions (64 still uses local64_t).
+ * On 32-bit machines, local64_t is very expensive. As the ring
+ * buffer doesn't need all the features of a true 64-bit atomic,
+ * on 32-bit, it uses these functions (64-bit still uses local64_t).
*
- * For the ring buffer, 64 bit required operations for the time is
- * the following:
+ * For the ring buffer, the operations required to manipulate 64-bit
+ * time stamps are the following:
*
- * - Reads may fail if it interrupted a modification of the time stamp.
+ * - Read may fail if it interrupted a modification of the time stamp.
* It will succeed if it did not interrupt another write even if
* the read itself is interrupted by a write.
+ * A read will fail if it follows a cmpxchg which failed between
+ * updates to its top and msb bits, until a write is performed.
+ * (note: this limitation may be unexpected in parts of the
+ * ring buffer algorithm)
* It returns whether it was successful or not.
*
- * - Writes always succeed and will overwrite other writes and writes
+ * - Write always succeeds and will overwrite other writes and writes
* that were done by events interrupting the current write.
*
* - A write followed by a read of the same time stamp will always succeed,
* but may not contain the same value.
*
* - A cmpxchg will fail if it interrupted another write or cmpxchg.
+ * A cmpxchg will fail if it follows a cmpxchg which failed between
+ * updates to its top and msb bits, until a write is performed.
+ * (note: this limitation may be unexpected in parts of the
+ * ring buffer algorithm)
* Other than that, it acts like a normal cmpxchg.
*
- * The 60 bit time stamp is broken up by 30 bits in a top and bottom half
- * (bottom being the least significant 30 bits of the 60 bit time stamp).
+ * The 64-bit time stamp is broken up, from most to least significant,
+ * in: msb, top and bottom fields, of respectively 4, 30, and 30 bits.
*
- * The two most significant bits of each half holds a 2 bit counter (0-3).
+ * The two most significant bits of each field hold a 2-bit counter (0-3).
* Each update will increment this counter by one.
- * When reading the top and bottom, if the two counter bits match then the
- * top and bottom together make a valid 60 bit number.
+ * When reading the top, bottom, and msb fields, if the two counter bits
+ * match, then the combined values make a valid 64-bit number.
+ *
+ * Counter limits. The following situations can generate overflows that
+ * produce corrupted time stamps:
+ *
+ * - A read or a write interrupted by 2^32 writes or cmpxchg.
+ *
+ * - A cmpxchg interrupted by 4 writes or cmpxchg.
+ * (note: this is not sufficient and should be fixed)
*/
#define RB_TIME_SHIFT 30
#define RB_TIME_VAL_MASK ((1 << RB_TIME_SHIFT) - 1)
@@ -632,7 +648,7 @@ static inline bool __rb_time_read(rb_time_t *t, u64 *ret, unsigned long *cnt)
/*
* If the read is interrupted by a write, then the cnt will
- * be different. Loop until both top and bottom have been read
+ * be different. Loop until top, bottom and msb have been read
* without interruption.
*/
do {
@@ -644,7 +660,12 @@ static inline bool __rb_time_read(rb_time_t *t, u64 *ret, unsigned long *cnt)
*cnt = rb_time_cnt(top);
- /* If top and msb counts don't match, this interrupted a write */
+ /*
+ * If top and msb counts don't match, this either interrupted a
+ * write or follows a failed cmpxchg.
+ * This requires the update to bottom to be enclosed between
+ * updates to top and msb.
+ */
if (*cnt != rb_time_cnt(msb))
return false;
@@ -685,9 +706,10 @@ static void rb_time_set(rb_time_t *t, u64 val)
rb_time_split(val, &top, &bottom, &msb);
- /* Writes always succeed with a valid number even if it gets interrupted. */
+ /* Write always succeeds with a valid number even if it gets interrupted. */
do {
cnt = local_inc_return(&t->cnt);
+ /* The top and msb updates surround bottom update. */
rb_time_val_set(&t->top, top, cnt);
rb_time_val_set(&t->bottom, bottom, cnt);
rb_time_val_set(&t->msb, val >> RB_TIME_MSB_SHIFT, cnt);
@@ -706,7 +728,12 @@ static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set)
unsigned long cnt2, top2, bottom2, msb2;
u64 val;
- /* The cmpxchg always fails if it interrupted an update */
+ /*
+ * The cmpxchg always fails if it interrupted an update or if it
+ * follows a cmpxchg that fails between updates to top and msb.
+ * A rb_time_set() is needed after a failed cmpxchg to reset to
+ * a state where cmpxchg can succeed again.
+ */
if (!__rb_time_read(t, &val, &cnt2))
return false;
@@ -729,12 +756,13 @@ static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set)
if (!rb_time_read_cmpxchg(&t->cnt, cnt, cnt2))
return false;
- if (!rb_time_read_cmpxchg(&t->msb, msb, msb2))
- return false;
+ /* The top and msb updates surround bottom update. */
if (!rb_time_read_cmpxchg(&t->top, top, top2))
return false;
if (!rb_time_read_cmpxchg(&t->bottom, bottom, bottom2))
return false;
+ if (!rb_time_read_cmpxchg(&t->msb, msb, msb2))
+ return false;
return true;
}
--
2.39.2
Powered by blists - more mailing lists