Message-ID: <CAOf5uwmT3uFQhyTOkNDMana5na5jcKm81tdyeann2UnFwaQp5w@mail.gmail.com>
Date:   Mon, 11 Dec 2023 22:41:46 +0100
From:   Michael Nazzareno Trimarchi <michael@...rulasolutions.com>
To:     Doug Anderson <dianders@...omium.org>
Cc:     Jason Wessel <jason.wessel@...driver.com>,
        Daniel Thompson <daniel.thompson@...aro.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        kgdb-bugreport@...ts.sourceforge.net, linux-kernel@...r.kernel.org,
        linux-serial@...r.kernel.org
Subject: Re: [RFC PATCH] tty: serial: kgdboc: Fix 8250_* kgd over serial

Hi Doug

On Mon, Dec 11, 2023 at 10:39 PM Doug Anderson <dianders@...omium.org> wrote:
>
> Hi,
>
> On Fri, Dec 8, 2023 at 1:28 PM Michael Trimarchi
> <michael@...rulasolutions.com> wrote:
> >
> > Use late_initcall_sync insted of module init to be sure that
> > serial driver is really probed and get take handover from
> > early driver.
>
> Awesome that you used the earlycon driver to debug problems with
> registering the normal driver! :-P
>
>
> > The 8250 register the platform driver after
> > the 8250 core is initialized. As shown by kdbg
> >
> > Thread 2 received signal SIGSEGV, Segmentation fault.
> > [Switching to Thread 1]
> > _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584
> > 584             __raw_writeb(value, PCI_IOBASE + addr);
> > (gdb) bt
> >
> > This section of the code is too early because in this case
> > the omap serial is not probed
> >
> > Thread 2 received signal SIGSEGV, Segmentation fault.
> > [Switching to Thread 1]
> > _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584
> > 584             __raw_writeb(value, PCI_IOBASE + addr);
> > (gdb) bt
> >
> > Thread 2 received signal SIGSEGV, Segmentation fault.
> > [Switching to Thread 1]
> > _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584
> > 584             __raw_writeb(value, PCI_IOBASE + addr);
> > (gdb) bt
> > 0  _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584
> > 1  logic_outb (value=0 '\000', addr=18446739675637874689) at lib/logic_pio.c:299
> > 2  0xffff80008082dfcc in io_serial_out (p=0x0, offset=16760830, value=0) at drivers/tty/serial/8250/8250_port.c:416
> > 3  0xffff80008082fe34 in serial_port_out (value=<optimized out>, offset=<optimized out>, up=<optimized out>)
> >     at ./include/linux/serial_core.h:677
> > 4  serial8250_do_set_termios (port=0xffff8000828ee940 <serial8250_ports+1568>, termios=0xffff80008292b93c, old=0x0)
> >     at drivers/tty/serial/8250/8250_port.c:2860
> > 5  0xffff800080830064 in serial8250_set_termios (port=0xfffffbfffe800000, termios=0xffbffe, old=0x0)
> >     at drivers/tty/serial/8250/8250_port.c:2912
> > 6  0xffff80008082571c in uart_set_options (port=0xffff8000828ee940 <serial8250_ports+1568>, co=0x0, baud=115200, parity=110, bits=8, flow=110)
> >     at drivers/tty/serial/serial_core.c:2285
> > 7  0xffff800080828434 in uart_poll_init (driver=0xfffffbfffe800000, line=16760830, options=0xffff8000828f7506 <config+6> "115200n8")
> >     at drivers/tty/serial/serial_core.c:2656
> > 8  0xffff800080801690 in tty_find_polling_driver (name=0xffff8000828f7500 <config> "ttyS2,115200n8", line=0xffff80008292ba90)
> >     at drivers/tty/tty_io.c:410
> > 9  0xffff80008086c0b0 in configure_kgdboc () at drivers/tty/serial/kgdboc.c:194
> > 10 0xffff80008086c1ec in kgdboc_probe (pdev=0xfffffbfffe800000) at drivers/tty/serial/kgdboc.c:249
> > 11 0xffff8000808b399c in platform_probe (_dev=0xffff000000ebb810) at drivers/base/platform.c:1404
> > 12 0xffff8000808b0b44 in call_driver_probe (drv=<optimized out>, dev=<optimized out>) at drivers/base/dd.c:579
> > 13 really_probe (dev=0xffff000000ebb810, drv=0xffff80008277f138 <kgdboc_platform_driver+48>) at drivers/base/dd.c:658
> > 14 0xffff8000808b0d2c in __driver_probe_device (drv=0xffff80008277f138 <kgdboc_platform_driver+48>, dev=0xffff000000ebb810)
> >     at drivers/base/dd.c:800
> > 15 0xffff8000808b0eb8 in driver_probe_device (drv=0xfffffbfffe800000, dev=0xffff000000ebb810) at drivers/base/dd.c:830
> > 16 0xffff8000808b0ff4 in __device_attach_driver (drv=0xffff80008277f138 <kgdboc_platform_driver+48>, _data=0xffff80008292bc48)
> >     at drivers/base/dd.c:958
> > 17 0xffff8000808ae970 in bus_for_each_drv (bus=0xfffffbfffe800000, start=0x0, data=0xffff80008292bc48,
> >     fn=0xffff8000808b0f3c <__device_attach_driver>) at drivers/base/bus.c:457
> > 18 0xffff8000808b1408 in __device_attach (dev=0xffff000000ebb810, allow_async=true) at drivers/base/dd.c:1030
> > 19 0xffff8000808b16d8 in device_initial_probe (dev=0xfffffbfffe800000) at drivers/base/dd.c:1079
> > 20 0xffff8000808af9f4 in bus_probe_device (dev=0xffff000000ebb810) at drivers/base/bus.c:532
> > 21 0xffff8000808ac77c in device_add (dev=0xfffffbfffe800000) at drivers/base/core.c:3625
> > 22 0xffff8000808b3428 in platform_device_add (pdev=0xffff000000ebb800) at drivers/base/platform.c:716
> > 23 0xffff800081b5dc0c in init_kgdboc () at drivers/tty/serial/kgdboc.c:292
> > 24 0xffff800080014db0 in do_one_initcall (fn=0xffff800081b5dba4 <init_kgdboc>) at init/main.c:1236
> > 25 0xffff800081b0114c in do_initcall_level (command_line=<optimized out>, level=<optimized out>) at init/main.c:1298
> > 26 do_initcalls () at init/main.c:1314
> > 27 do_basic_setup () at init/main.c:1333
> > 28 kernel_init_freeable () at init/main.c:1551
> > 29 0xffff8000810271ec in kernel_init (unused=0xfffffbfffe800000) at init/main.c:1441
> > 30 0xffff800080015e80 in ret_from_fork () at arch/arm64/kernel/entry.S:857
> >
> > Signed-off-by: Michael Trimarchi <michael@...rulasolutions.com>
> > ---
> >  drivers/tty/serial/kgdboc.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
> > index 7ce7bb164005..7f8364507f55 100644
> > --- a/drivers/tty/serial/kgdboc.c
> > +++ b/drivers/tty/serial/kgdboc.c
> > @@ -622,7 +622,7 @@ console_initcall(kgdboc_earlycon_late_init);
> >
> >  #endif /* IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */
> >
> > -module_init(init_kgdboc);
> > +late_initcall_sync(init_kgdboc);
>
> While I'm not denying that you hit a bug, I don't think this is the
> correct fix. The way it's supposed to work is:
>

Yes it's a bug

> 1. init_kgdboc() runs and registers the singleton kgdb "platform driver".
>
> 2. The platform driver's probe function, kgdboc_probe(), runs and
> checks to see if the console is ready by looking at the return value
> of configure_kgdboc(). If it's ready then we're good to go. If it's
> not ready then we defer.
>
> So I think the bug here is that somehow the console looks "ready"
> (because tty_find_polling_driver() can find it) but it isn't actually
> ready yet (because it crashes). That's what you need to fix.
>

The polling driver look for uart and uart8250_core is registered and 4 fake uart
are there but there are not still replaced by platform driver that can
come later.
The try_polling find it but it's the isa-8250 driver. It means that
add_uart 8250 is
not still happen

> I'll note that, in the past, I've definitely used kgdb on 8250-based
> UARTs. Is your hardware somehow special or is this a regression?
>

Michael

> -Doug



-- 
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael@...rulasolutions.com
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info@...rulasolutions.com
www.amarulasolutions.com

Powered by blists - more mailing lists