[ 0.000000] Linux version 5.10.201 (root@newton) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Tue Nov 21 10:43:48 CET 2023 [ 0.000000] Command line: BOOT_IMAGE=Linux-5.10.201 ro root=801 console=tty0 console=ttyS0,115200 ignore_loglevel rootfstype=ext4 log_buf_len=4M [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006c3acfff] usable [ 0.000000] BIOS-e820: [mem 0x000000006c3ad000-0x000000006dc26fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006dc27000-0x000000006de95fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000006de96000-0x000000006e345fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006e346000-0x000000006ec0dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006ec0e000-0x000000006ec0efff] usable [ 0.000000] BIOS-e820: [mem 0x000000006ec0f000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086dffffff] usable [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.2.1 present. [ 0.000000] DMI: System manufacturer System Product Name/PRIME B360M-A, BIOS 3202 07/10/2021 [ 0.000000] tsc: Detected 3200.000 MHz processor [ 0.000000] tsc: Detected 3199.980 MHz TSC [ 0.000455] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000458] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000464] last_pfn = 0x86e000 max_arch_pfn = 0x400000000 [ 0.000466] MTRR default type: write-back [ 0.000467] MTRR fixed ranges enabled: [ 0.000468] 00000-9FFFF write-back [ 0.000469] A0000-BFFFF uncachable [ 0.000469] C0000-FFFFF write-protect [ 0.000470] MTRR variable ranges enabled: [ 0.000471] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000472] 1 base 0070000000 mask 7FF0000000 uncachable [ 0.000473] 2 base 006F800000 mask 7FFF800000 uncachable [ 0.000473] 3 base 2000000000 mask 6000000000 uncachable [ 0.000474] 4 base 1000000000 mask 7000000000 uncachable [ 0.000475] 5 base 4000000000 mask 4000000000 uncachable [ 0.000475] 6 disabled [ 0.000476] 7 disabled [ 0.000476] 8 disabled [ 0.000477] 9 disabled [ 0.000887] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001270] last_pfn = 0x6ec0f max_arch_pfn = 0x400000000 [ 0.007216] found SMP MP-table at [mem 0x000fcd70-0x000fcd7f] [ 0.007223] Using GB pages for direct mapping [ 0.008940] printk: log_buf_len: 4194304 bytes [ 0.008942] printk: early log buf free: 128120(97%) [ 0.008944] ACPI: Early table checksum verification disabled [ 0.008947] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.008951] ACPI: XSDT 0x000000006DE320B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008955] ACPI: FACP 0x000000006DE72960 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.008959] ACPI: DSDT 0x000000006DE32218 040748 (v02 ALASKA A M I 01072009 INTL 20160527) [ 0.008962] ACPI: FACS 0x000000006E345080 000040 [ 0.008964] ACPI: APIC 0x000000006DE72A78 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.008966] ACPI: FPDT 0x000000006DE72B70 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008968] ACPI: FIDT 0x000000006DE72BB8 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008970] ACPI: MCFG 0x000000006DE72C58 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.008973] ACPI: WSMT 0x000000006DE81470 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.008975] ACPI: SSDT 0x000000006DE72CF0 001B1C (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.008977] ACPI: SSDT 0x000000006DE74810 003099 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.008980] ACPI: HPET 0x000000006DE778B0 000038 (v01 ALASKA A M I 00000002 01000013) [ 0.008982] ACPI: SSDT 0x000000006DE778E8 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527) [ 0.008984] ACPI: SSDT 0x000000006DE78898 002FD0 (v02 INTEL xh_cfsd4 00000000 INTL 20160527) [ 0.008987] ACPI: UEFI 0x000000006DE7B868 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.008989] ACPI: LPIT 0x000000006DE7B8B0 000094 (v01 ALASKA A M I 00000002 01000013) [ 0.008991] ACPI: SSDT 0x000000006DE7B948 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527) [ 0.008993] ACPI: SSDT 0x000000006DE7E128 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527) [ 0.008996] ACPI: DBGP 0x000000006DE7F610 000034 (v01 ALASKA A M I 00000002 01000013) [ 0.008998] ACPI: DBG2 0x000000006DE7F648 000054 (v00 ALASKA A M I 00000002 01000013) [ 0.009000] ACPI: SSDT 0x000000006DE7F6A0 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527) [ 0.009002] ACPI: DMAR 0x000000006DE81208 0000A8 (v01 INTEL EDK2 00000002 01000013) [ 0.009004] ACPI: SSDT 0x000000006DE812B0 000144 (v02 Intel ADebTabl 00001000 INTL 20160527) [ 0.009006] ACPI: WPBT 0x000000006DE813F8 00003C (v01 ALASKA A M I 00000001 ASUS 00000001) [ 0.009009] ACPI: TPM2 0x000000006DE81438 000034 (v04 ALASKA A M I 00000001 AMI 00000000) [ 0.009011] ACPI: Reserving FACP table memory at [mem 0x6de72960-0x6de72a73] [ 0.009012] ACPI: Reserving DSDT table memory at [mem 0x6de32218-0x6de7295f] [ 0.009013] ACPI: Reserving FACS table memory at [mem 0x6e345080-0x6e3450bf] [ 0.009013] ACPI: Reserving APIC table memory at [mem 0x6de72a78-0x6de72b6b] [ 0.009014] ACPI: Reserving FPDT table memory at [mem 0x6de72b70-0x6de72bb3] [ 0.009015] ACPI: Reserving FIDT table memory at [mem 0x6de72bb8-0x6de72c53] [ 0.009016] ACPI: Reserving MCFG table memory at [mem 0x6de72c58-0x6de72c93] [ 0.009016] ACPI: Reserving WSMT table memory at [mem 0x6de81470-0x6de81497] [ 0.009017] ACPI: Reserving SSDT table memory at [mem 0x6de72cf0-0x6de7480b] [ 0.009018] ACPI: Reserving SSDT table memory at [mem 0x6de74810-0x6de778a8] [ 0.009018] ACPI: Reserving HPET table memory at [mem 0x6de778b0-0x6de778e7] [ 0.009019] ACPI: Reserving SSDT table memory at [mem 0x6de778e8-0x6de78895] [ 0.009020] ACPI: Reserving SSDT table memory at [mem 0x6de78898-0x6de7b867] [ 0.009021] ACPI: Reserving UEFI table memory at [mem 0x6de7b868-0x6de7b8a9] [ 0.009021] ACPI: Reserving LPIT table memory at [mem 0x6de7b8b0-0x6de7b943] [ 0.009022] ACPI: Reserving SSDT table memory at [mem 0x6de7b948-0x6de7e125] [ 0.009023] ACPI: Reserving SSDT table memory at [mem 0x6de7e128-0x6de7f609] [ 0.009024] ACPI: Reserving DBGP table memory at [mem 0x6de7f610-0x6de7f643] [ 0.009024] ACPI: Reserving DBG2 table memory at [mem 0x6de7f648-0x6de7f69b] [ 0.009025] ACPI: Reserving SSDT table memory at [mem 0x6de7f6a0-0x6de81206] [ 0.009026] ACPI: Reserving DMAR table memory at [mem 0x6de81208-0x6de812af] [ 0.009027] ACPI: Reserving SSDT table memory at [mem 0x6de812b0-0x6de813f3] [ 0.009027] ACPI: Reserving WPBT table memory at [mem 0x6de813f8-0x6de81433] [ 0.009028] ACPI: Reserving TPM2 table memory at [mem 0x6de81438-0x6de8146b] [ 0.009038] ACPI: Local APIC address 0xfee00000 [ 0.009062] Zone ranges: [ 0.009063] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009064] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.009065] Normal [mem 0x0000000100000000-0x000000086dffffff] [ 0.009066] Movable zone start for each node [ 0.009067] Early memory node ranges [ 0.009068] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.009068] node 0: [mem 0x0000000000100000-0x000000006c3acfff] [ 0.009069] node 0: [mem 0x000000006ec0e000-0x000000006ec0efff] [ 0.009070] node 0: [mem 0x0000000100000000-0x000000086dffffff] [ 0.009072] Initmem setup node 0 [mem 0x0000000000001000-0x000000086dffffff] [ 0.009074] On node 0 totalpages: 8233802 [ 0.009074] DMA zone: 64 pages used for memmap [ 0.009075] DMA zone: 21 pages reserved [ 0.009076] DMA zone: 3996 pages, LIFO batch:0 [ 0.009077] DMA32 zone: 6863 pages used for memmap [ 0.009077] DMA32 zone: 439214 pages, LIFO batch:63 [ 0.009078] Normal zone: 121728 pages used for memmap [ 0.009079] Normal zone: 7790592 pages, LIFO batch:63 [ 0.009080] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009099] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.011378] On node 0, zone DMA32: 10337 pages in unavailable ranges [ 0.050702] On node 0, zone Normal: 5105 pages in unavailable ranges [ 0.050759] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.050774] Reserving Intel graphics memory at [mem 0x70000000-0x8fffffff] [ 0.051044] ACPI: PM-Timer IO Port: 0x1808 [ 0.051045] ACPI: Local APIC address 0xfee00000 [ 0.051049] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.051050] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.051050] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.051051] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.051052] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.051052] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.051053] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.051053] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.051054] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.051055] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.051055] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.051056] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.051090] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.051091] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.051092] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.051093] ACPI: IRQ0 used by override. [ 0.051094] ACPI: IRQ9 used by override. [ 0.051095] Using ACPI (MADT) for SMP configuration information [ 0.051097] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.051099] TSC deadline timer available [ 0.051100] smpboot: Allowing 12 CPUs, 0 hotplug CPUs [ 0.051112] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.051113] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.051114] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.051114] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.051115] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.051116] PM: hibernation: Registered nosave memory: [mem 0x6c3ad000-0x6dc26fff] [ 0.051117] PM: hibernation: Registered nosave memory: [mem 0x6dc27000-0x6de95fff] [ 0.051117] PM: hibernation: Registered nosave memory: [mem 0x6de96000-0x6e345fff] [ 0.051118] PM: hibernation: Registered nosave memory: [mem 0x6e346000-0x6ec0dfff] [ 0.051119] PM: hibernation: Registered nosave memory: [mem 0x6ec0f000-0x8fffffff] [ 0.051120] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff] [ 0.051120] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.051121] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.051122] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.051122] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.051123] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.051123] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.051124] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.051125] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff] [ 0.051125] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.051126] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.051126] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.051128] [mem 0x90000000-0xdfffffff] available for PCI devices [ 0.051130] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.054012] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.054244] percpu: Embedded 56 pages/cpu s190104 r8192 d31080 u262144 [ 0.054249] pcpu-alloc: s190104 r8192 d31080 u262144 alloc=1*2097152 [ 0.054250] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- [ 0.054269] Built 1 zonelists, mobility grouping on. Total pages: 8105126 [ 0.054270] Kernel command line: BOOT_IMAGE=Linux-5.10.201 ro root=801 console=tty0 console=ttyS0,115200 ignore_loglevel rootfstype=ext4 log_buf_len=4M [ 0.055573] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.056186] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.056269] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.111022] Memory: 32259948K/32935208K available (10248K kernel code, 1361K rwdata, 2236K rodata, 1220K init, 604K bss, 675004K reserved, 0K cma-reserved) [ 0.111060] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.111067] Kernel/User page tables isolation: enabled [ 0.111141] rcu: Hierarchical RCU implementation. [ 0.111143] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.111433] NR_IRQS: 4352, nr_irqs: 2152, preallocated irqs: 16 [ 0.113270] Console: colour VGA+ 80x25 [ 0.131118] printk: console [tty0] enabled [ 1.136872] printk: console [ttyS0] enabled [ 1.139837] ACPI: Core revision 20200925 [ 1.142884] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 1.150800] APIC: Switch to symmetric I/O mode setup [ 1.154583] Switched APIC routing to physical flat. [ 1.162865] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.171714] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e2036ff8d5, max_idle_ns: 440795275316 ns [ 1.181014] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.96 BogoMIPS (lpj=3199980) [ 1.182061] mce: CPU0: Thermal monitoring enabled (TM1) [ 1.183032] process: using mwait in idle threads [ 1.184014] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 1.185013] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 1.186014] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.187013] Spectre V2 : Mitigation: IBRS [ 1.188013] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.189013] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.190013] RETBleed: Mitigation: IBRS [ 1.191013] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.192013] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 1.193013] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 1.194017] MDS: Mitigation: Clear CPU buffers [ 1.195013] TAA: Mitigation: Clear CPU buffers [ 1.196013] MMIO Stale Data: Mitigation: Clear CPU buffers [ 1.197015] SRBDS: Mitigation: Microcode [ 1.198013] GDS: Vulnerable: No microcode [ 1.199017] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.200013] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.201013] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.202013] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 1.203013] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 1.204014] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.205013] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 1.206013] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 1.207013] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 1.219618] Freeing SMP alternatives memory: 28K [ 1.220013] pid_max: default: 32768 minimum: 301 [ 1.221063] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.222038] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.224083] smpboot: CPU0: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz (family: 0x6, model: 0x9e, stepping: 0xa) [ 1.225112] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 1.226014] ... version: 4 [ 1.227013] ... bit width: 48 [ 1.228013] ... generic registers: 4 [ 1.229013] ... value mask: 0000ffffffffffff [ 1.230013] ... max period: 00007fffffffffff [ 1.231013] ... fixed-purpose events: 3 [ 1.232013] ... event mask: 000000070000000f [ 1.233106] rcu: Hierarchical SRCU implementation. [ 1.234735] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.235163] smp: Bringing up secondary CPUs ... [ 1.236100] x86: Booting SMP configuration: [ 1.237014] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 [ 1.241078] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 1.243013] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 1.244013] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 1.245115] #7 #8 #9 #10 #11 [ 1.248289] smp: Brought up 1 node, 12 CPUs [ 1.250013] smpboot: Max logical packages: 1 [ 1.251014] smpboot: Total of 12 processors activated (76799.52 BogoMIPS) [ 1.253585] devtmpfs: initialized [ 1.254147] PM: Registering ACPI NVS region [mem 0x6de96000-0x6e345fff] (4915200 bytes) [ 1.255099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.256016] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 1.257344] NET: Registered protocol family 16 [ 1.258101] audit: initializing netlink subsys (disabled) [ 1.259025] audit: type=2000 audit(1701109998.087:1): state=initialized audit_enabled=0 res=1 [ 1.259122] thermal_sys: Registered thermal governor 'step_wise' [ 1.260015] thermal_sys: Registered thermal governor 'user_space' [ 1.261030] cpuidle: using governor ladder [ 1.263016] cpuidle: using governor menu [ 1.264041] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.265014] ACPI: bus type PCI registered [ 1.266072] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.267015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 1.268026] PCI: Using configuration type 1 for base access [ 1.269429] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 1.271466] Kprobes globally optimized [ 1.272031] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.277070] ACPI: Added _OSI(Module Device) [ 1.280014] ACPI: Added _OSI(Processor Device) [ 1.284014] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.287013] ACPI: Added _OSI(Processor Aggregator Device) [ 1.291013] ACPI: Added _OSI(Linux-Dell-Video) [ 1.294013] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.299013] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 1.353798] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 1.363221] ACPI: Dynamic OEM Table Load: [ 1.366017] ACPI: SSDT 0xFFFF8881013B6900 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 1.374962] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 1.380231] ACPI: Dynamic OEM Table Load: [ 1.383017] ACPI: SSDT 0xFFFF88810088A000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 1.391060] ACPI: Dynamic OEM Table Load: [ 1.394017] ACPI: SSDT 0xFFFF888101422800 000647 (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 1.403108] ACPI: Dynamic OEM Table Load: [ 1.405015] ACPI: SSDT 0xFFFF8881010EE200 000133 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 1.413972] ACPI: Dynamic OEM Table Load: [ 1.416017] ACPI: SSDT 0xFFFF888101423000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 1.425154] ACPI: Dynamic OEM Table Load: [ 1.428016] ACPI: SSDT 0xFFFF888101424000 0005FC (v02 PmRef ApIst 00003000 INTL 20160527) [ 1.436085] ACPI: Dynamic OEM Table Load: [ 1.439016] ACPI: SSDT 0xFFFF88810088A800 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 1.447093] ACPI: Dynamic OEM Table Load: [ 1.450017] ACPI: SSDT 0xFFFF8881008DE000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 1.458462] ACPI: Dynamic OEM Table Load: [ 1.462016] ACPI: SSDT 0xFFFF88810088AC00 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 1.474216] ACPI: Interpreter enabled [ 1.477039] ACPI: (supports S0 S3 S4 S5) [ 1.479013] ACPI: Using IOAPIC for interrupt routing [ 1.483048] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.491979] ACPI: Enabled 8 GPEs in block 00 to 7F [ 1.508053] ACPI: Power Resource [USBC] (on) [ 1.514031] ACPI: Power Resource [V0PR] (on) [ 1.517327] ACPI: Power Resource [V1PR] (on) [ 1.520322] ACPI: Power Resource [V2PR] (on) [ 1.530033] ACPI: Power Resource [WRST] (on) [ 1.538033] ACPI: Power Resource [FN00] (off) [ 1.541111] ACPI: Power Resource [FN01] (off) [ 1.544106] ACPI: Power Resource [FN02] (off) [ 1.548013] ACPI: Power Resource [FN03] (off) [ 1.551105] ACPI: Power Resource [FN04] (off) [ 1.555020] ACPI: Power Resource [PIN] (off) [ 1.558391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.563017] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.571145] acpi PNP0A08:00: _OSC: platform does not support [PME] [ 1.576134] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR] [ 1.581014] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.589013] PCI host bridge to bus 0000:00 [ 1.592015] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.597014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.603014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.609014] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] [ 1.615015] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 1.621014] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.626037] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000 [ 1.631032] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000 [ 1.635021] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] [ 1.641017] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 1.647016] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 1.652012] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 [ 1.656027] pci 0000:00:14.0: reg 0x10: [mem 0xa1600000-0xa160ffff 64bit] [ 1.662067] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.667330] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 [ 1.672030] pci 0000:00:14.2: reg 0x10: [mem 0xa1616000-0xa1617fff 64bit] [ 1.677024] pci 0000:00:14.2: reg 0x18: [mem 0xa161c000-0xa161cfff 64bit] [ 1.683179] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 [ 1.688033] pci 0000:00:16.0: reg 0x10: [mem 0xa161b000-0xa161bfff 64bit] [ 1.693094] pci 0000:00:16.0: PME# supported from D3hot [ 1.698031] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601 [ 1.702025] pci 0000:00:17.0: reg 0x10: [mem 0xa1614000-0xa1615fff] [ 1.707019] pci 0000:00:17.0: reg 0x14: [mem 0xa161a000-0xa161a0ff] [ 1.713019] pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097] [ 1.717019] pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083] [ 1.721019] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 1.726019] pci 0000:00:17.0: reg 0x24: [mem 0xa1619000-0xa16197ff] [ 1.731047] pci 0000:00:17.0: PME# supported from D3hot [ 1.735190] pci 0000:00:1b.0: [8086:a32c] type 01 class 0x060400 [ 1.740095] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.745229] pci 0000:00:1c.0: [8086:a33c] type 01 class 0x060400 [ 1.750078] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.755034] pci 0000:00:1c.5: [8086:a33d] type 01 class 0x060400 [ 1.759085] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.765027] pci 0000:00:1c.7: [8086:a33f] type 01 class 0x060400 [ 1.769086] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.774195] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400 [ 1.779086] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.784229] pci 0000:00:1f.0: [8086:a308] type 00 class 0x060100 [ 1.789328] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 [ 1.794045] pci 0000:00:1f.3: reg 0x10: [mem 0xa1610000-0xa1613fff 64bit] [ 1.800060] pci 0000:00:1f.3: reg 0x20: [mem 0xa1400000-0xa14fffff 64bit] [ 1.805091] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 1.811033] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 [ 1.815036] pci 0000:00:1f.4: reg 0x10: [mem 0xa1618000-0xa16180ff 64bit] [ 1.821038] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 1.825176] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 [ 1.830031] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 1.836037] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 1.839063] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.843073] pci 0000:03:00.0: [12d8:2304] type 01 class 0x060400 [ 1.848135] pci 0000:03:00.0: supports D1 D2 [ 1.851014] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.856037] pci 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:1c.5 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link) [ 1.870088] pci 0000:00:1c.5: PCI bridge to [bus 03-06] [ 1.874018] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa13fffff] [ 1.880086] pci 0000:04:01.0: [12d8:2304] type 01 class 0x060400 [ 1.885136] pci 0000:04:01.0: supports D1 D2 [ 1.888015] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.893089] pci 0000:04:02.0: [12d8:2304] type 01 class 0x060400 [ 1.898136] pci 0000:04:02.0: supports D1 D2 [ 1.901014] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.907095] pci 0000:03:00.0: PCI bridge to [bus 04-06] [ 1.911020] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa13fffff] [ 1.916085] pci 0000:05:00.0: [14f1:8852] type 00 class 0x040000 [ 1.921050] pci 0000:05:00.0: reg 0x10: [mem 0xa1200000-0xa13fffff 64bit] [ 1.927203] pci 0000:05:00.0: supports D1 D2 [ 1.930013] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot [ 1.935094] pci 0000:04:01.0: PCI bridge to [bus 05] [ 1.939020] pci 0000:04:01.0: bridge window [mem 0xa1200000-0xa13fffff] [ 1.944086] pci 0000:06:00.0: [14f1:8852] type 00 class 0x040000 [ 1.949049] pci 0000:06:00.0: reg 0x10: [mem 0xa1000000-0xa11fffff 64bit] [ 1.955201] pci 0000:06:00.0: supports D1 D2 [ 1.958013] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot [ 1.963094] pci 0000:04:02.0: PCI bridge to [bus 06] [ 1.966020] pci 0000:04:02.0: bridge window [mem 0xa1000000-0xa11fffff] [ 1.972092] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 1.977031] pci 0000:07:00.0: reg 0x10: [io 0x3000-0x30ff] [ 1.981037] pci 0000:07:00.0: reg 0x18: [mem 0xa1504000-0xa1504fff 64bit] [ 1.987028] pci 0000:07:00.0: reg 0x20: [mem 0xa1500000-0xa1503fff 64bit] [ 1.992111] pci 0000:07:00.0: supports D1 D2 [ 1.995013] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.001099] pci 0000:00:1c.7: PCI bridge to [bus 07] [ 2.005015] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff] [ 2.009015] pci 0000:00:1c.7: bridge window [mem 0xa1500000-0xa15fffff] [ 2.015051] pci 0000:00:1d.0: PCI bridge to [bus 08] [ 2.019044] pci_bus 0000:00: on NUMA node 0 [ 2.023202] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.029071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1 [ 2.035068] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.041067] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.046067] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.052067] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.058067] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.064067] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 2.071032] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 2.072012] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.083017] pci 0000:00:02.0: vgaarb: bridge control possible [ 2.087013] vgaarb: loaded [ 2.089062] SCSI subsystem initialized [ 2.091026] libata version 3.00 loaded. [ 2.094017] ACPI: bus type USB registered [ 2.097027] usbcore: registered new interface driver usbfs [ 2.101020] usbcore: registered new interface driver hub [ 2.105020] usbcore: registered new device driver usb [ 2.109038] pps_core: LinuxPPS API ver. 1 registered [ 2.113013] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.121016] PTP clock support registered [ 2.123057] Advanced Linux Sound Architecture Driver Initialized. [ 2.128115] PCI: Using ACPI for IRQ routing [ 2.173172] PCI: pci_cache_line_size set to 64 bytes [ 2.177090] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 2.182014] e820: reserve RAM buffer [mem 0x6c3ad000-0x6fffffff] [ 2.187014] e820: reserve RAM buffer [mem 0x6ec0f000-0x6fffffff] [ 2.192013] e820: reserve RAM buffer [mem 0x86e000000-0x86fffffff] [ 2.197070] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.202014] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 2.209028] clocksource: Switched to clocksource tsc-early [ 2.218953] VFS: Disk quotas dquot_6.6.0 [ 2.221673] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.227358] pnp: PnP ACPI init [ 2.229265] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved [ 2.235019] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.240716] system 00:01: [io 0x0290-0x029f] has been reserved [ 2.245421] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.251172] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 2.257552] pnp 00:03: [dma 0 disabled] [ 2.260213] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.265607] system 00:04: [io 0x0680-0x069f] has been reserved [ 2.270321] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.275979] system 00:05: [io 0x1854-0x1857] has been reserved [ 2.280685] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.287075] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.292476] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.297866] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.303251] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 2.308638] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.314023] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.319414] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.324803] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.330546] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.336274] system 00:07: [io 0x1800-0x18fe] could not be reserved [ 2.341323] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved [ 2.346716] system 00:07: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 2.352108] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 2.357493] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 2.363235] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved [ 2.368627] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 2.374017] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.379790] system 00:08: [io 0x2000-0x20fe] has been reserved [ 2.384500] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.390886] system 00:09: [mem 0xfd6e0000-0xfd6effff] has been reserved [ 2.396282] system 00:09: [mem 0xfd6d0000-0xfd6dffff] has been reserved [ 2.401677] system 00:09: [mem 0xfd6b0000-0xfd6bffff] has been reserved [ 2.407067] system 00:09: [mem 0xfd6a0000-0xfd6affff] has been reserved [ 2.412455] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.418638] pnp: PnP ACPI: found 10 devices [ 2.427499] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.435179] NET: Registered protocol family 2 [ 2.438456] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.446272] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 2.455656] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.462701] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.468957] TCP: Hash tables configured (established 262144 bind 65536) [ 2.474371] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.480065] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.486227] NET: Registered protocol family 1 [ 2.489378] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 2.496328] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 2.506584] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 2.515882] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 2.522835] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 2.533089] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 2.542389] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 2.549341] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 [ 2.559591] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000 [ 2.568895] pci 0000:00:1b.0: BAR 8: assigned [mem 0xa1700000-0xa18fffff] [ 2.574463] pci 0000:00:1b.0: BAR 9: assigned [mem 0xa1900000-0xa1afffff 64bit pref] [ 2.580978] pci 0000:00:1c.0: BAR 8: assigned [mem 0xa1b00000-0xa1cfffff] [ 2.586544] pci 0000:00:1c.0: BAR 9: assigned [mem 0xa1d00000-0xa1efffff 64bit pref] [ 2.593064] pci 0000:00:1d.0: BAR 8: assigned [mem 0xa1f00000-0xa20fffff] [ 2.598627] pci 0000:00:1d.0: BAR 9: assigned [mem 0xa2100000-0xa22fffff 64bit pref] [ 2.605140] pci 0000:00:1b.0: BAR 7: assigned [io 0x5000-0x5fff] [ 2.610007] pci 0000:00:1c.0: BAR 7: assigned [io 0x6000-0x6fff] [ 2.614875] pci 0000:00:1d.0: BAR 7: assigned [io 0x7000-0x7fff] [ 2.619742] pci 0000:00:1b.0: PCI bridge to [bus 01] [ 2.623484] pci 0000:00:1b.0: bridge window [io 0x5000-0x5fff] [ 2.628363] pci 0000:00:1b.0: bridge window [mem 0xa1700000-0xa18fffff] [ 2.633931] pci 0000:00:1b.0: bridge window [mem 0xa1900000-0xa1afffff 64bit pref] [ 2.640451] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.644195] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 2.649060] pci 0000:00:1c.0: bridge window [mem 0xa1b00000-0xa1cfffff] [ 2.654623] pci 0000:00:1c.0: bridge window [mem 0xa1d00000-0xa1efffff 64bit pref] [ 2.661145] pci 0000:04:01.0: PCI bridge to [bus 05] [ 2.664892] pci 0000:04:01.0: bridge window [mem 0xa1200000-0xa13fffff] [ 2.670464] pci 0000:04:02.0: PCI bridge to [bus 06] [ 2.674209] pci 0000:04:02.0: bridge window [mem 0xa1000000-0xa11fffff] [ 2.679782] pci 0000:03:00.0: PCI bridge to [bus 04-06] [ 2.683785] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa13fffff] [ 2.689352] pci 0000:00:1c.5: PCI bridge to [bus 03-06] [ 2.693354] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa13fffff] [ 2.698919] pci 0000:00:1c.7: PCI bridge to [bus 07] [ 2.702663] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff] [ 2.707533] pci 0000:00:1c.7: bridge window [mem 0xa1500000-0xa15fffff] [ 2.713101] pci 0000:00:1d.0: PCI bridge to [bus 08] [ 2.716849] pci 0000:00:1d.0: bridge window [io 0x7000-0x7fff] [ 2.721719] pci 0000:00:1d.0: bridge window [mem 0xa1f00000-0xa20fffff] [ 2.727284] pci 0000:00:1d.0: bridge window [mem 0xa2100000-0xa22fffff 64bit pref] [ 2.733805] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.738763] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.743727] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.749377] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] [ 2.755023] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window] [ 2.760670] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 2.765021] pci_bus 0000:01: resource 1 [mem 0xa1700000-0xa18fffff] [ 2.770062] pci_bus 0000:01: resource 2 [mem 0xa1900000-0xa1afffff 64bit pref] [ 2.776053] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 2.780400] pci_bus 0000:02: resource 1 [mem 0xa1b00000-0xa1cfffff] [ 2.785442] pci_bus 0000:02: resource 2 [mem 0xa1d00000-0xa1efffff 64bit pref] [ 2.791435] pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa13fffff] [ 2.796481] pci_bus 0000:04: resource 1 [mem 0xa1000000-0xa13fffff] [ 2.801519] pci_bus 0000:05: resource 1 [mem 0xa1200000-0xa13fffff] [ 2.806561] pci_bus 0000:06: resource 1 [mem 0xa1000000-0xa11fffff] [ 2.811598] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff] [ 2.815950] pci_bus 0000:07: resource 1 [mem 0xa1500000-0xa15fffff] [ 2.820988] pci_bus 0000:08: resource 0 [io 0x7000-0x7fff] [ 2.825335] pci_bus 0000:08: resource 1 [mem 0xa1f00000-0xa20fffff] [ 2.830375] pci_bus 0000:08: resource 2 [mem 0xa2100000-0xa22fffff 64bit pref] [ 2.836458] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.844406] PCI: CLS 64 bytes, default 64 [ 2.847203] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.852431] software IO TLB: mapped [mem 0x00000000683ad000-0x000000006c3ad000] (64MB) [ 2.859196] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 2.865887] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.870408] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.874840] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 2.879012] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 2.883651] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 2.890861] Initialise system trusted keyrings [ 2.894128] workingset: timestamp_bits=62 max_order=23 bucket_order=0 [ 2.900423] Key type asymmetric registered [ 2.903307] Asymmetric key parser 'x509' registered [ 2.906971] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.913140] io scheduler mq-deadline registered [ 2.916454] io scheduler kyber registered [ 2.920337] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 2.927487] ACPI: Sleep Button [SLPB] [ 2.929977] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.937132] ACPI: Power Button [PWRB] [ 2.939623] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.945837] ACPI: Power Button [PWRF] [ 2.948578] Monitor-Mwait will be used to enter C-1 state [ 2.952767] Monitor-Mwait will be used to enter C-2 state [ 2.956955] ACPI: \_SB_.PR00: Found 2 idle states [ 2.960657] ACPI: \_SB_.PR01: Found 2 idle states [ 2.964346] ACPI: \_SB_.PR02: Found 2 idle states [ 2.968030] ACPI: \_SB_.PR03: Found 2 idle states [ 2.971712] ACPI: \_SB_.PR04: Found 2 idle states [ 2.975398] ACPI: \_SB_.PR05: Found 2 idle states [ 2.979087] ACPI: \_SB_.PR06: Found 2 idle states [ 2.982766] ACPI: \_SB_.PR07: Found 2 idle states [ 2.986451] ACPI: \_SB_.PR08: Found 2 idle states [ 2.990135] ACPI: \_SB_.PR09: Found 2 idle states [ 2.993821] ACPI: \_SB_.PR10: Found 2 idle states [ 2.997510] ACPI: \_SB_.PR11: Found 2 idle states [ 3.001363] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.005808] ACPI: Thermal Zone [TZ00] (28 C) [ 3.008923] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.014128] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.020771] Linux agpgart interface v0.103 [ 3.023657] ACPI: bus type drm_connector registered [ 3.028111] ahci 0000:00:17.0: version 3.0 [ 3.041272] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 3.048226] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst [ 3.071886] scsi host0: ahci [ 3.073788] scsi host1: ahci [ 3.075640] scsi host2: ahci [ 3.077521] scsi host3: ahci [ 3.079379] scsi host4: ahci [ 3.081169] scsi host5: ahci [ 3.082882] ata1: SATA max UDMA/133 abar m2048@0xa1619000 port 0xa1619100 irq 127 [ 3.089144] ata2: SATA max UDMA/133 abar m2048@0xa1619000 port 0xa1619180 irq 127 [ 3.095398] ata3: SATA max UDMA/133 abar m2048@0xa1619000 port 0xa1619200 irq 127 [ 3.101648] ata4: SATA max UDMA/133 abar m2048@0xa1619000 port 0xa1619280 irq 127 [ 3.107905] ata5: SATA max UDMA/133 abar m2048@0xa1619000 port 0xa1619300 irq 127 [ 3.114158] ata6: SATA max UDMA/133 abar m2048@0xa1619000 port 0xa1619380 irq 127 [ 3.120508] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.126077] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.135802] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.139697] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 3.144264] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 3.149991] i2c i2c-0: 4/4 memory slots populated (from DMI) [ 3.154957] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 3.159856] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 3.164827] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 3.169779] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 3.174260] intel_pstate: Intel P-state driver initializing [ 3.179210] intel_pstate: Disabling energy efficiency optimization [ 3.184164] intel_pstate: HWP enabled [ 3.186640] hid: raw HID events driver (C) Jiri Kosina [ 3.190607] usbcore: registered new interface driver usbhid [ 3.194961] usbhid: USB HID core driver [ 3.197598] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.200291] NET: Registered protocol family 17 [ 3.208939] microcode: sig=0x906ea, pf=0x2, revision=0xd6 [ 3.213343] microcode: Microcode Update Driver: v2.2. [ 3.213345] IPI shorthand broadcast: enabled [ 3.220241] sched_clock: Marking stable (2160013224, 1060214265)->(3538480658, -318253169) [ 3.227449] registered taskstats version 1 [ 3.230327] Loading compiled-in X.509 certificates [ 3.234907] ALSA device list: [ 3.236661] No soundcards found. [ 3.424921] ata3: SATA link down (SStatus 4 SControl 300) [ 3.429511] ata6: SATA link down (SStatus 4 SControl 300) [ 3.433982] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.439230] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.444476] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.449717] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.454966] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LW00, max UDMA/133 [ 3.460858] ata1.00: supports DRM functions and may not be fully accessible [ 3.466893] ata4.00: supports DRM functions and may not be fully accessible [ 3.472968] ata2.00: HPA detected: current 976771055, native 976773168 [ 3.478721] ata2.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133 [ 3.484586] ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.490551] ata5.00: configured for UDMA/133 [ 3.493774] ata1.00: disabling queued TRIM support [ 3.497532] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 3.503757] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.509654] ata4.00: disabling queued TRIM support [ 3.513419] ata4.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT04B6Q, max UDMA/133 [ 3.519761] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.525969] ata2.00: configured for UDMA/133 [ 3.531632] ata1.00: supports DRM functions and may not be fully accessible [ 3.538383] ata1.00: disabling queued TRIM support [ 3.542232] ata4.00: supports DRM functions and may not be fully accessible [ 3.548811] ata4.00: disabling queued TRIM support [ 3.553035] ata1.00: configured for UDMA/133 [ 3.557712] ata4.00: configured for UDMA/133 [ 3.891277] tsc: Refined TSC clocksource calibration: 3192.000 MHz [ 3.896761] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c4a121d, max_idle_ns: 440795236083 ns [ 3.906146] clocksource: Switched to clocksource tsc [ 6.067348] floppy0: no floppy controllers found [ 6.071658] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 6.079243] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.079607] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 6.083743] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5 [ 6.090307] sd 0:0:0:0: [sda] Write Protect is off [ 6.097799] sd 1:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/466 GiB) [ 6.097825] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 6.098014] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 860 4B6Q PQ: 0 ANSI: 5 [ 6.098104] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 6.098171] ata4.00: Enabling discard_zeroes_data [ 6.098194] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 6.098197] sd 3:0:0:0: [sdc] Write Protect is off [ 6.098198] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.098202] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.098963] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LW00 PQ: 0 ANSI: 5 [ 6.101454] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.101464] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.108084] sd 1:0:0:0: [sdb] Write Protect is off [ 6.108163] ata4.00: Enabling discard_zeroes_data [ 6.110293] sdc: sdc1 sdc2 [ 6.110501] ata4.00: Enabling discard_zeroes_data [ 6.110526] sd 3:0:0:0: [sdc] Attached SCSI disk [ 6.186720] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.190779] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.192943] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 6.203220] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.218621] sdb: sdb1 [ 6.220536] sd 1:0:0:0: [sdb] Attached SCSI disk [ 6.233277] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.241306] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.262985] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 6.266714] sr 4:0:0:0: Attached scsi generic sg3 type 5 [ 6.278298] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.285126] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 6.291117] Freeing unused kernel image (initmem) memory: 1220K [ 6.305304] Write protecting the kernel read-only data: 16384k [ 6.311557] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 6.318312] Freeing unused kernel image (rodata/data gap) memory: 1860K [ 6.324339] Run /sbin/init as init process [ 6.327481] with arguments: [ 6.329389] /sbin/init [ 6.331012] with environment: [ 6.333120] HOME=/ [ 6.334373] TERM=linux [ 6.336003] BOOT_IMAGE=Linux-5.10.201 [ 6.421279] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 6.443245] systemd[1]: Inserted module 'autofs4' [ 6.466779] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 6.502421] systemd[1]: Detected architecture x86-64. [ 6.514630] systemd[1]: Set hostname to . [ 6.576867] systemd-sysv-generator[1141]: Overwriting existing symlink /run/systemd/generator.late/powstatd.service with real service. [ 6.603654] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 6.611800] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 6.661626] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. [ 6.726873] systemd[1]: Queued start job for default target Graphical Interface. [ 6.733695] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 6.745781] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 6.753626] systemd[1]: Created slice system-modprobe.slice. [ 6.767478] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.781472] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.795448] systemd[1]: Created slice User and Session Slice. [ 6.808444] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.825439] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.842509] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.861443] systemd[1]: Reached target Local Encrypted Volumes. [ 6.875446] systemd[1]: Reached target User and Group Name Lookups. [ 6.889421] systemd[1]: Reached target Slices. [ 6.900517] systemd[1]: Listening on RPCbind Server Activation Socket. [ 6.916456] systemd[1]: Listening on Syslog Socket. [ 6.927455] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.943432] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.959534] systemd[1]: Listening on Journal Audit Socket. [ 6.972457] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.986479] systemd[1]: Listening on Journal Socket. [ 6.997472] systemd[1]: Listening on udev Control Socket. [ 7.010451] systemd[1]: Listening on udev Kernel Socket. [ 7.023718] systemd[1]: Mounting Huge Pages File System... [ 7.035715] systemd[1]: Mounting POSIX Message Queue File System... [ 7.049652] systemd[1]: Mounting NFSD configuration filesystem... [ 7.063578] systemd[1]: Mounting RPC Pipe File System... [ 7.066180] RPC: Registered named UNIX socket transport module. [ 7.072914] RPC: Registered udp transport module. [ 7.072915] RPC: Registered tcp transport module. [ 7.072915] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.092837] systemd[1]: Mounting Kernel Debug File System... [ 7.099289] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 7.110771] systemd[1]: Mounting Kernel Trace File System... [ 7.122554] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 7.131582] systemd[1]: Starting Set the console keyboard layout... [ 7.148294] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.166708] systemd[1]: Starting Load Kernel Module configfs... [ 7.178700] systemd[1]: Starting Load Kernel Module drm... [ 7.190680] systemd[1]: Starting Load Kernel Module fuse... [ 7.191939] random: mktemp: uninitialized urandom read (6 bytes read) [ 7.201093] fuse: init (API version 7.32) [ 7.202043] random: mktemp: uninitialized urandom read (6 bytes read) [ 7.218456] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.223398] random: ckbcomp: uninitialized urandom read (4 bytes read) [ 7.228769] systemd[1]: Starting File System Check on Root Device... [ 7.238957] systemd[1]: Starting Journal Service... [ 7.245044] systemd[1]: Starting Load Kernel Modules... [ 7.252556] lp: driver loaded but no devices found [ 7.258930] ppdev: user-space parallel port driver [ 7.267158] loop: module loaded [ 7.269775] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 7.278329] softdog: soft_reboot_cmd= soft_active_on_boot=0 [ 7.290409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.290685] systemd[1]: Starting Coldplug All udev Devices... [ 7.304840] ntfs: driver 2.1.32 [Flags: R/W MODULE]. [ 7.312422] systemd[1]: Mounted Huge Pages File System. [ 7.324373] systemd[1]: Mounted POSIX Message Queue File System. [ 7.338362] systemd[1]: Mounted NFSD configuration filesystem. [ 7.351354] systemd[1]: Started Journal Service. [ 7.363802] Bluetooth: Core ver 2.22 [ 7.367095] NET: Registered protocol family 31 [ 7.371846] Bluetooth: HCI device and connection manager initialized [ 7.378606] Bluetooth: HCI socket layer initialized [ 7.382536] Bluetooth: L2CAP socket layer initialized [ 7.387938] Bluetooth: SCO socket layer initialized [ 7.394249] Bluetooth: RFCOMM TTY layer initialized [ 7.398414] Bluetooth: RFCOMM socket layer initialized [ 7.403817] Bluetooth: RFCOMM ver 1.11 [ 7.419993] Key type cifs.spnego registered [ 7.424221] Key type cifs.idmap registered [ 7.435810] mc: Linux media interface: v0.10 [ 7.443270] videodev: Linux video capture interface: v2.00 [ 7.453891] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 7.460964] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 7.466984] saa7134_alsa: saa7134 ALSA: no saa7134 cards found [ 7.536989] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 7.542367] ext4 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 7.871490] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 7.878207] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 7.885950] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 7.895036] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 7.903471] rtc_cmos rtc_cmos: RTC can wake from S4 [ 7.903522] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 7.909378] rtc_cmos rtc_cmos: registered as rtc0 [ 7.912884] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 7.923232] rtc_cmos rtc_cmos: setting system clock to 2023-11-27T18:33:26 UTC (1701110006) [ 7.923239] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 7.923308] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 7.943471] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.943472] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.943473] usb usb1: Product: xHCI Host Controller [ 7.943475] usb usb1: Manufacturer: Linux 5.10.201 xhci-hcd [ 7.943475] usb usb1: SerialNumber: 0000:00:14.0 [ 7.943533] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 7.943616] hub 1-0:1.0: USB hub found [ 7.943647] hub 1-0:1.0: 16 ports detected [ 7.947603] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.992505] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.992506] usb usb2: Product: xHCI Host Controller [ 7.992507] usb usb2: Manufacturer: Linux 5.10.201 xhci-hcd [ 7.992508] usb usb2: SerialNumber: 0000:00:14.0 [ 7.992696] hub 2-0:1.0: USB hub found [ 8.013795] hub 2-0:1.0: 6 ports detected [ 8.016202] usb: port power management may be unreliable [ 8.032911] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 8.046073] Setting dangerous option enable_guc - tainting kernel [ 8.048179] r8169 0000:07:00.0 eth0: RTL8168h/8111h, 4c:ed:fb:c9:63:36, XID 541, IRQ 129 [ 8.059789] r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 8.067875] i915 0000:00:02.0: [drm] Incompatible option enable_guc=3 - GuC submission is N/A [ 8.077384] i915 0000:00:02.0: vgaarb: deactivate vga console [ 8.083458] cx23885: cx23885 driver version 0.0.4 loaded [ 8.083594] cx23885: CORE cx23885[0]: subsystem: 0070:6a28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 8.084452] Console: switching to colour dummy device 80x25 [ 8.105969] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.115798] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 8.115969] i915 0000:00:02.0: Direct firmware load for i915/kbl_guc_33.0.0.bin failed with error -2 [ 8.132272] i915 0000:00:02.0: [drm] GuC firmware i915/kbl_guc_33.0.0.bin: fetch failed with error -2 [ 8.132273] i915 0000:00:02.0: [drm] GuC firmware(s) can be downloaded from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [ 8.133126] i915 0000:00:02.0: [drm] GuC is uninitialized [ 8.192441] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0 [ 8.204172] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.210717] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 8.213293] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 8.226354] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 8.263296] Adding 5132284k swap on /dev/sda5. Priority:-2 extents:1 across:5132284k SS [ 8.284985] fbcon: i915drmfb (fb0) is primary device [ 8.315606] Console: switching to colour frame buffer device 128x48 [ 8.342806] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 8.354476] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 8.357849] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 8.357852] ext4 filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff) [ 8.365476] usb 1-1: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 0.06 [ 8.365477] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 8.365477] usb 1-1: Product: Smart-UPS 1000 FW:652.12.I USB FW:4.2 [ 8.365478] usb 1-1: Manufacturer: American Power Conversion [ 8.365478] usb 1-1: SerialNumber: AS0543127105 [ 8.429142] tveeprom: Hauppauge model 166200, rev B4I6, serial# 4036033296 [ 8.435322] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 8.435322] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 8.435323] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 8.435324] tveeprom: audio processor is CX23885 (idx 39) [ 8.435324] tveeprom: decoder processor is CX23885 (idx 33) [ 8.462170] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 8.462170] cx23885: cx23885[0]: hauppauge eeprom: model=166200 [ 8.462171] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 8.462179] cx23885: cx23885[0]: cx23885 based dvb card [ 8.489968] cx23885: dvb_register(): board=60 port=1 [ 8.490988] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 8.496952] hid-generic 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Smart-UPS 1000 FW:652.12.I USB FW:4.2] on usb-0000:00:14.0-1/input0 [ 8.505912] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.531115] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.531116] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 8.531117] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 8.531117] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 8.531164] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 8.561727] i2c i2c-6: Added multiplexed i2c bus 9 [ 8.563351] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 8.568165] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified [ 8.568166] si2168 6-0064: firmware version: B 4.0.2 [ 8.585219] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 8.590954] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 8.599136] dvbdev: DVB: registering new adapter (cx23885[0]) [ 8.605276] cx23885 0000:05:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 8.605407] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 8.605408] cx23885: cx23885[0]: cx23885 based dvb card [ 8.605410] cx23885: dvb_register(): board=60 port=2 [ 8.611634] i2c i2c-6: Added multiplexed i2c bus 10 [ 8.611635] si2168 6-0066: Silicon Labs Si2168-B40 successfully identified [ 8.611636] si2168 6-0066: firmware version: B 4.0.2 [ 8.612976] si2157 7-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 8.612984] dvbdev: DVB: registering new adapter (cx23885[0]) [ 8.612986] cx23885 0000:05:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 8.613023] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 [ 8.613073] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 [ 8.613110] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 [ 8.613240] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 8.613244] cx23885: cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 18, latency: 0, mmio: 0xa1200000 [ 8.613247] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 8.613280] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 8.613311] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 8.613337] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 8.613367] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 8.613372] cx23885: CORE cx23885[1]: subsystem: 0070:6b28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 8.613390] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 8.613418] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 8.638273] usb 1-7: new high-speed USB device number 3 using xhci_hcd [ 8.639229] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 8.651919] random: alsactl: uninitialized urandom read (4 bytes read) [ 8.954039] tveeprom: Hauppauge model 166201, rev B4I6, serial# 4036033296 [ 8.960505] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 8.965111] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 8.970882] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 8.976411] tveeprom: audio processor is CX23885 (idx 39) [ 8.981191] tveeprom: decoder processor is CX23885 (idx 33) [ 8.986164] tveeprom: has no radio [ 8.988819] cx23885: cx23885[1]: hauppauge eeprom: model=166201 [ 8.994140] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 8.999916] cx23885: cx23885[1]: cx23885 based dvb card [ 9.003625] usb 1-7: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 9.004598] cx23885: dvb_register(): board=60 port=1 [ 9.012556] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 9.012557] usb 1-7: SerialNumber: 3A4A22D0 [ 9.023708] i2c i2c-11: Added multiplexed i2c bus 14 [ 9.031780] si2168 11-0064: Silicon Labs Si2168-B40 successfully identified [ 9.038229] si2168 11-0064: firmware version: B 4.0.2 [ 9.043985] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 9.051271] dvbdev: DVB: registering new adapter (cx23885[1]) [ 9.056451] cx23885 0000:06:00.0: DVB: registering adapter 2 frontend 0 (Silicon Labs Si2168)... [ 9.065120] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 9.070945] cx23885: cx23885[1]: cx23885 based dvb card [ 9.075530] cx23885: dvb_register(): board=60 port=2 [ 9.086119] i2c i2c-11: Added multiplexed i2c bus 15 [ 9.090558] si2168 11-0066: Silicon Labs Si2168-B40 successfully identified [ 9.097134] si2168 11-0066: firmware version: B 4.0.2 [ 9.102904] si2157 12-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 9.110158] dvbdev: DVB: registering new adapter (cx23885[1]) [ 9.115294] cx23885 0000:06:00.0: DVB: registering adapter 3 frontend 0 (Silicon Labs Si2168)... [ 9.123960] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 9.130213] cx23885: cx23885[1]/0: found at 0000:06:00.0, rev: 3, irq: 19, latency: 0, mmio: 0xa1000000 [ 9.138301] usb 1-8: new low-speed USB device number 4 using xhci_hcd [ 9.275631] usb 1-8: New USB device found, idVendor=13ba, idProduct=0017, bcdDevice= 0.01 [ 9.283434] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9.290091] usb 1-8: Product: Generic USB K/B [ 9.297011] input: Generic USB K/B as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:13BA:0017.0002/input/input16 [ 9.359966] hid-generic 0003:13BA:0017.0002: input,hidraw1: USB HID v1.10 Keyboard [Generic USB K/B] on usb-0000:00:14.0-8/input0 [ 9.373556] input: Generic USB K/B Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:13BA:0017.0003/input/input17 [ 9.384991] input: Generic USB K/B System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:13BA:0017.0003/input/input18 [ 9.448614] hid-generic 0003:13BA:0017.0003: input,hidraw2: USB HID v1.10 Mouse [Generic USB K/B] on usb-0000:00:14.0-8/input1 [ 9.573282] usb 1-10: new high-speed USB device number 5 using xhci_hcd [ 9.706734] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 [ 9.715512] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9.715513] usb 1-10: Product: USB2.0 Hub [ 9.716611] hub 1-10:1.0: USB hub found [ 9.731090] hub 1-10:1.0: 4 ports detected [ 9.755260] random: crng init done [ 9.851297] usb 1-11: new high-speed USB device number 6 using xhci_hcd [ 9.997974] usb 1-11: New USB device found, idVendor=05e3, idProduct=0745, bcdDevice= 9.03 [ 10.006949] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 10.014681] usb 1-11: Product: USB Storage [ 10.019104] usb 1-11: SerialNumber: 000000000903 [ 10.046407] usb-storage 1-11:1.0: USB Mass Storage device detected [ 10.053401] scsi host6: usb-storage 1-11:1.0 [ 10.057694] mousedev: PS/2 mouse device common for all mice [ 10.057763] usbcore: registered new interface driver usb-storage [ 10.071276] uvcvideo: Found UVC 1.00 device (046d:0825) [ 10.115231] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input19 [ 10.126243] usbcore: registered new interface driver uvcvideo [ 10.132272] USB Video Class driver (1.1.1) [ 11.060585] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0903 PQ: 0 ANSI: 6 [ 11.068673] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 11.082748] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 11.490599] usb 1-7: set resolution quirk: cval->res = 384 [ 11.496851] usbcore: registered new interface driver snd-usb-audio [ 12.354510] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 12.361679] ext4 filesystem being mounted at /var supports timestamps until 2038 (0x7fffffff) [ 12.430786] systemd-journald[1230]: Received client request to flush runtime journal. [ 12.676290] Generic FE-GE Realtek PHY r8169-0-700:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-700:00, irq=IGNORE) [ 12.853491] r8169 0000:07:00.0 eth0: Link is Down [ 13.192890] serial8250 serial8250: LSR safety check engaged! [ 13.198373] serial8250 serial8250: LSR safety check engaged! [ 13.556502] vmmon: loading out-of-tree module taints kernel. [ 13.563095] /dev/vmmon[3212]: Module vmmon: registered as misc device [ 13.570372] /dev/vmmon[3212]: Using tsc_khz as TSC frequency: 3192000 [ 13.577225] /dev/vmmon[3212]: Module vmmon: initialized [ 13.593934] Guest personality initialized and is inactive [ 13.598823] VMCI host device registered (name=vmci, major=10, minor=60) [ 13.604919] Initialized host personality [ 13.617290] NET: Registered protocol family 40 [ 14.490109] NFSD: Using UMH upcall client tracking operations. [ 14.495564] NFSD: starting 90-second grace period (net f0000098) [ 14.558597] r8169 0000:07:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 14.673282] userif-3: sent link down event. [ 14.677883] userif-3: sent link up event. [ 16.742540] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [ 24.780640] serial8250 serial8250: LSR safety check engaged! [ 25.620094] serial8250 serial8250: LSR safety check engaged! [ 34.547943] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.552242] Bluetooth: BNEP filters: protocol [ 34.555609] Bluetooth: BNEP socket layer initialized [ 1183.615209] /dev/vmmon[14294]: PTSC: initialized at 3192000000 Hz using TSC, TSCs are synchronized. [ 1183.740458] /dev/vmmon[14294]: Monitor IPI vector: 0 [ 1183.744360] /dev/vmmon[14294]: HV IPI vector: 0 [ 1191.364082] device eth0 entered promiscuous mode [ 1191.367722] bridge-eth0: enabled promiscuous mode [ 2886.125769] device eth0 left promiscuous mode [ 2886.129113] bridge-eth0: disabled promiscuous mode [ 2902.845313] ahci 0000:00:17.0: port does not support device sleep [ 2902.852516] ahci 0000:00:17.0: port does not support device sleep [ 2903.108778] PM: suspend entry (deep) [ 2903.116185] Filesystems sync: 0.004 seconds [ 2903.119715] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 2903.129891] OOM killer disabled. [ 2903.132026] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2903.140206] printk: Suspending console(s) (use no_console_suspend to debug) [ 2903.158480] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 2903.158483] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2903.158496] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 2903.158588] sd 0:0:0:0: [sda] Stopping disk [ 2903.158592] sd 3:0:0:0: [sdc] Stopping disk [ 2903.158653] sd 1:0:0:0: [sdb] Stopping disk [ 2903.193922] serial 00:03: disabled [ 2903.193976] r8169 0000:07:00.0 eth0: Link is Down [ 2904.781637] ACPI: Preparing to enter system sleep state S3 [ 2904.986847] PM: Saving platform NVS memory [ 2904.986874] Disabling non-boot CPUs ... [ 2904.988810] smpboot: CPU 1 is now offline [ 2904.991979] smpboot: CPU 2 is now offline [ 2904.995975] smpboot: CPU 3 is now offline [ 2904.998213] smpboot: CPU 4 is now offline [ 2905.000552] smpboot: CPU 5 is now offline [ 2905.003626] smpboot: CPU 6 is now offline [ 2905.006594] smpboot: CPU 7 is now offline [ 2905.008587] smpboot: CPU 8 is now offline [ 2905.010632] smpboot: CPU 9 is now offline [ 2905.012807] smpboot: CPU 10 is now offline [ 2905.014871] smpboot: CPU 11 is now offline [ 2905.019258] ACPI: Low-level resume complete [ 2905.019301] PM: Restoring platform NVS memory [ 2905.020011] smpboot: Scheduler frequency invariance went wobbly, disabling! [ 2905.020063] Enabling non-boot CPUs ... [ 2905.020085] x86: Booting SMP configuration: [ 2905.020086] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 2905.020855] ACPI: \_SB_.PR01: Found 2 idle states [ 2905.021007] CPU1 is up [ 2905.021017] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 2905.021633] ACPI: \_SB_.PR02: Found 2 idle states [ 2905.021746] CPU2 is up [ 2905.021757] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 2905.022373] ACPI: \_SB_.PR03: Found 2 idle states [ 2905.022490] CPU3 is up [ 2905.022500] smpboot: Booting Node 0 Processor 4 APIC 0x8 [ 2905.023120] ACPI: \_SB_.PR04: Found 2 idle states [ 2905.023242] CPU4 is up [ 2905.023251] smpboot: Booting Node 0 Processor 5 APIC 0xa [ 2905.023874] ACPI: \_SB_.PR05: Found 2 idle states [ 2905.023997] CPU5 is up [ 2905.024007] smpboot: Booting Node 0 Processor 6 APIC 0x1 [ 2905.024690] ACPI: \_SB_.PR06: Found 2 idle states [ 2905.024871] CPU6 is up [ 2905.024883] smpboot: Booting Node 0 Processor 7 APIC 0x3 [ 2905.025494] ACPI: \_SB_.PR07: Found 2 idle states [ 2905.025629] CPU7 is up [ 2905.025638] smpboot: Booting Node 0 Processor 8 APIC 0x5 [ 2905.026259] ACPI: \_SB_.PR08: Found 2 idle states [ 2905.026399] CPU8 is up [ 2905.026408] smpboot: Booting Node 0 Processor 9 APIC 0x7 [ 2905.027036] ACPI: \_SB_.PR09: Found 2 idle states [ 2905.027183] CPU9 is up [ 2905.027194] smpboot: Booting Node 0 Processor 10 APIC 0x9 [ 2905.027826] ACPI: \_SB_.PR10: Found 2 idle states [ 2905.027978] CPU10 is up [ 2905.027987] smpboot: Booting Node 0 Processor 11 APIC 0xb [ 2905.028613] ACPI: \_SB_.PR11: Found 2 idle states [ 2905.028773] CPU11 is up [ 2905.031017] ACPI: Waking up from system sleep state S3 [ 2905.071401] serial 00:03: activated [ 2905.071463] sd 0:0:0:0: [sda] Starting disk [ 2905.071482] i915 0000:00:02.0: [drm] GuC is uninitialized [ 2905.071497] sd 1:0:0:0: [sdb] Starting disk [ 2905.071503] sd 3:0:0:0: [sdc] Starting disk [ 2905.233930] r8169 0000:07:00.0 eth0: Link is Down [ 2905.334092] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [ 2905.388477] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2905.388735] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2905.388761] ata6: SATA link down (SStatus 4 SControl 300) [ 2905.388988] ata1.00: supports DRM functions and may not be fully accessible [ 2905.389756] ata1.00: disabling queued TRIM support [ 2905.391341] ata1.00: supports DRM functions and may not be fully accessible [ 2905.391957] ata1.00: disabling queued TRIM support [ 2905.393433] ata1.00: configured for UDMA/133 [ 2905.393532] ahci 0000:00:17.0: port does not support device sleep [ 2905.396500] ata3: SATA link down (SStatus 4 SControl 300) [ 2905.396722] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2905.397024] ata4.00: supports DRM functions and may not be fully accessible [ 2905.397399] ata4.00: disabling queued TRIM support [ 2905.399292] ata4.00: supports DRM functions and may not be fully accessible [ 2905.399751] ata4.00: disabling queued TRIM support [ 2905.401395] ata4.00: configured for UDMA/133 [ 2905.401468] ahci 0000:00:17.0: port does not support device sleep [ 2905.402005] ata4.00: Enabling discard_zeroes_data [ 2905.405371] ata5.00: configured for UDMA/133 [ 2905.986369] acpi LNXPOWER:04: Turning OFF [ 2905.989236] acpi LNXPOWER:00: Turning OFF [ 2905.992119] OOM killer enabled. [ 2905.994086] Restarting tasks ... done. [ 2905.999983] PM: suspend exit [ 2906.085245] cx23885: cx23885 driver version 0.0.4 loaded [ 2906.089632] cx23885: CORE cx23885[0]: subsystem: 0070:6a28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 2906.194824] userif-3: sent link down event. [ 2906.198004] userif-3: sent link up event. [ 2906.447241] tveeprom: Hauppauge model 166200, rev B4I6, serial# 4036033296 [ 2906.453725] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 2906.457947] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 2906.463477] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 2906.468720] tveeprom: audio processor is CX23885 (idx 39) [ 2906.473192] tveeprom: decoder processor is CX23885 (idx 33) [ 2906.477767] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 2906.483676] cx23885: cx23885[0]: hauppauge eeprom: model=166200 [ 2906.488571] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 2906.493943] cx23885: cx23885[0]: cx23885 based dvb card [ 2906.498100] cx23885: dvb_register(): board=60 port=1 [ 2906.508629] i2c i2c-6: Added multiplexed i2c bus 9 [ 2906.512324] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified [ 2906.518227] si2168 6-0064: firmware version: B 4.0.2 [ 2906.523575] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 2906.530345] dvbdev: DVB: registering new adapter (cx23885[0]) [ 2906.535050] cx23885 0000:05:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 2906.543222] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 2906.548561] cx23885: cx23885[0]: cx23885 based dvb card [ 2906.552736] cx23885: dvb_register(): board=60 port=2 [ 2906.563153] i2c i2c-6: Added multiplexed i2c bus 10 [ 2906.566948] si2168 6-0066: Silicon Labs Si2168-B40 successfully identified [ 2906.572850] si2168 6-0066: firmware version: B 4.0.2 [ 2906.578172] si2157 7-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 2906.584923] dvbdev: DVB: registering new adapter (cx23885[0]) [ 2906.589655] cx23885 0000:05:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 2906.597798] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 2906.603622] cx23885: cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 18, latency: 0, mmio: 0xa1200000 [ 2906.612367] cx23885: CORE cx23885[1]: subsystem: 0070:6b28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 2906.867318] r8169 0000:07:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 2906.966902] tveeprom: Hauppauge model 166201, rev B4I6, serial# 4036033296 [ 2906.972997] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 2906.977177] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 2906.982685] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 2906.987878] tveeprom: audio processor is CX23885 (idx 39) [ 2906.992383] tveeprom: decoder processor is CX23885 (idx 33) [ 2906.997001] tveeprom: has no radio [ 2906.999215] cx23885: cx23885[1]: hauppauge eeprom: model=166201 [ 2906.999218] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 2906.999219] cx23885: cx23885[1]: cx23885 based dvb card [ 2906.999221] cx23885: dvb_register(): board=60 port=1 [ 2907.005909] i2c i2c-11: Added multiplexed i2c bus 14 [ 2907.021412] si2168 11-0064: Silicon Labs Si2168-B40 successfully identified [ 2907.027420] si2168 11-0064: firmware version: B 4.0.2 [ 2907.032921] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 2907.039741] dvbdev: DVB: registering new adapter (cx23885[1]) [ 2907.044482] cx23885 0000:06:00.0: DVB: registering adapter 2 frontend 0 (Silicon Labs Si2168)... [ 2907.052703] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 2907.058124] cx23885: cx23885[1]: cx23885 based dvb card [ 2907.062296] cx23885: dvb_register(): board=60 port=2 [ 2907.072808] i2c i2c-11: Added multiplexed i2c bus 15 [ 2907.076735] si2168 11-0066: Silicon Labs Si2168-B40 successfully identified [ 2907.076772] userif-3: sent link down event. [ 2907.082730] si2168 11-0066: firmware version: B 4.0.2 [ 2907.084149] si2157 12-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 2907.085827] userif-3: sent link up event. [ 2907.089795] dvbdev: DVB: registering new adapter (cx23885[1]) [ 2907.104230] cx23885 0000:06:00.0: DVB: registering adapter 3 frontend 0 (Silicon Labs Si2168)... [ 2907.112419] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 2907.118262] cx23885: cx23885[1]/0: found at 0000:06:00.0, rev: 3, irq: 19, latency: 0, mmio: 0xa1000000 [ 2909.970583] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2910.003617] ata2.00: configured for UDMA/133 [ 3064.967269] si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 3065.637688] si2168 6-0064: firmware version: B 4.0.11 [ 3065.648666] si2157 7-0060: found a 'Silicon Labs Si2157-A30' [ 3065.702588] si2157 7-0060: firmware version: 3.0.5 [ 3065.717467] si2168 6-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 3066.388079] si2168 6-0066: firmware version: B 4.0.11 [ 3066.399216] si2157 7-0062: found a 'Silicon Labs Si2157-A30' [ 3066.452725] si2157 7-0062: firmware version: 3.0.5 [ 3066.467725] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 3067.132455] si2168 11-0064: firmware version: B 4.0.11 [ 3067.143573] si2157 12-0060: found a 'Silicon Labs Si2157-A30' [ 3067.197851] si2157 12-0060: firmware version: 3.0.5 [ 3067.212661] si2168 11-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 3067.877541] si2168 11-0066: firmware version: B 4.0.11 [ 3067.888607] si2157 12-0062: found a 'Silicon Labs Si2157-A30' [ 3067.942656] si2157 12-0062: firmware version: 3.0.5 [ 3107.341200] PM: suspend entry (deep) [ 3107.346553] Filesystems sync: 0.002 seconds [ 3107.349803] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 3107.358209] OOM killer disabled. [ 3107.360326] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done. [ 3107.370575] printk: Suspending console(s) (use no_console_suspend to debug) [ 3107.386516] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 3107.386578] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 3107.386591] sd 3:0:0:0: [sdc] Stopping disk [ 3107.386728] sd 1:0:0:0: [sdb] Stopping disk [ 3107.394616] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3107.394737] sd 0:0:0:0: [sda] Stopping disk [ 3107.425068] serial 00:03: disabled [ 3107.425130] r8169 0000:07:00.0 eth0: Link is Down [ 3109.082387] ACPI: Preparing to enter system sleep state S3 [ 3109.292572] PM: Saving platform NVS memory [ 3109.292600] Disabling non-boot CPUs ... [ 3109.292602] Wakeup pending. Abort CPU freeze [ 3109.292604] Non-boot CPUs are not disabled [ 3109.292628] ACPI: Waking up from system sleep state S3 [ 3109.335538] cx23885: cx23885[0]: mpeg risc op code error [ 3109.335545] cx23885: cx23885[0]: TS1 B - dma channel status dump [ 3109.335551] cx23885: cx23885[0]: cmds: init risc lo : 0x6ec0e000 [ 3109.335557] cx23885: cx23885[0]: cmds: init risc hi : 0x00000000 [ 3109.335562] cx23885: cx23885[0]: cmds: cdt base : 0x00010580 [ 3109.335567] cx23885: cx23885[0]: cmds: cdt size : 0x0000000a [ 3109.335572] cx23885: cx23885[0]: cmds: iq base : 0x00010400 [ 3109.335577] cx23885: cx23885[0]: cmds: iq size : 0x00000010 [ 3109.335582] cx23885: cx23885[0]: cmds: risc pc lo : 0x028cf0b4 [ 3109.335587] cx23885: cx23885[0]: cmds: risc pc hi : 0x00000000 [ 3109.335592] cx23885: cx23885[0]: cmds: iq wr ptr : 0x00004103 [ 3109.335596] cx23885: cx23885[0]: cmds: iq rd ptr : 0x00004107 [ 3109.335601] cx23885: cx23885[0]: cmds: cdt current : 0x00010588 [ 3109.335606] cx23885: cx23885[0]: cmds: pci target lo : 0x02861a70 [ 3109.335611] cx23885: cx23885[0]: cmds: pci target hi : 0x00000000 [ 3109.335616] cx23885: cx23885[0]: cmds: line / byte : 0x02090000 [ 3109.335621] cx23885: cx23885[0]: risc0: [ 3109.335624] 0x1c0002f0 [ write sol eol count=752 ] [ 3109.335639] cx23885: cx23885[0]: risc1: [ 3109.335641] 0x02861a70 [ INVALID irq2 23 18 cnt1 12 count=2672 ] [ 3109.336803] cx23885: cx23885[0]: risc2: [ 3109.336805] 0x00000000 [ INVALID count=0 ] [ 3109.336810] cx23885: cx23885[0]: risc3: [ 3109.336812] 0x1c0002f0 [ write sol eol count=752 ] [ 3109.336820] cx23885: cx23885[0]: (0x00010400) iq 0: [ 3109.336822] 0x1c0002f0 [ write sol eol count=752 ] [ 3109.336830] cx23885: cx23885[0]: iq 1: 0x02862630 [ arg #1 ] [ 3109.336834] cx23885: cx23885[0]: iq 2: 0x00000000 [ arg #2 ] [ 3109.336838] cx23885: cx23885[0]: (0x0001040c) iq 3: [ 3109.336840] 0x00000000 [ INVALID count=0 ] [ 3109.336845] cx23885: cx23885[0]: (0x00010410) iq 4: [ 3109.336847] 0x1c0002f0 [ write sol eol count=752 ] [ 3109.336855] cx23885: cx23885[0]: iq 5: 0x02861a70 [ arg #1 ] [ 3109.336859] cx23885: cx23885[0]: iq 6: 0x00000000 [ arg #2 ] [ 3109.336863] cx23885: cx23885[0]: (0x0001041c) iq 7: [ 3109.336864] 0x1c0002f0 [ write sol eol count=752 ] [ 3109.336872] cx23885: cx23885[0]: iq 8: 0x02861d60 [ arg #1 ] [ 3109.336876] cx23885: cx23885[0]: iq 9: 0x00000000 [ arg #2 ] [ 3109.336880] cx23885: cx23885[0]: (0x00010428) iq a: [ 3109.336881] 0x1c0002f0 [ write sol eol count=752 ] [ 3109.336889] cx23885: cx23885[0]: iq b: 0x02862050 [ arg #1 ] [ 3109.336893] cx23885: cx23885[0]: iq c: 0x00000000 [ arg #2 ] [ 3109.336897] cx23885: cx23885[0]: (0x00010434) iq d: [ 3109.336898] 0x1c0002f0 [ write sol eol count=752 ] [ 3109.336906] cx23885: cx23885[0]: iq e: 0x02862340 [ arg #1 ] [ 3109.336910] cx23885: cx23885[0]: iq f: 0x00000000 [ arg #2 ] [ 3109.336912] cx23885: cx23885[0]: fifo: 0x00005000 -> 0x6000 [ 3109.336914] cx23885: cx23885[0]: ctrl: 0x00010400 -> 0x10460 [ 3109.336918] cx23885: cx23885[0]: ptr1_reg: 0x00005290 [ 3109.336922] cx23885: cx23885[0]: ptr2_reg: 0x00010588 [ 3109.336926] cx23885: cx23885[0]: cnt1_reg: 0x00000029 [ 3109.336930] cx23885: cx23885[0]: cnt2_reg: 0x00000009 [ 3109.339906] sd 3:0:0:0: [sdc] Starting disk [ 3109.339911] sd 0:0:0:0: [sda] Starting disk [ 3109.339932] sd 1:0:0:0: [sdb] Starting disk [ 3109.340571] i915 0000:00:02.0: [drm] GuC is uninitialized [ 3109.340939] serial 00:03: activated [ 3109.444119] r8169 0000:07:00.0 eth0: Link is Down [ 3109.657754] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3109.657818] ata3: SATA link down (SStatus 4 SControl 300) [ 3109.657888] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3109.657963] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3109.657990] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3109.658015] ata6: SATA link down (SStatus 4 SControl 300) [ 3109.659704] ata1.00: supports DRM functions and may not be fully accessible [ 3109.659830] ata2.00: configured for UDMA/133 [ 3109.660132] ata4.00: supports DRM functions and may not be fully accessible [ 3109.660330] ata1.00: disabling queued TRIM support [ 3109.660455] ata5.00: configured for UDMA/133 [ 3109.660688] ata4.00: disabling queued TRIM support [ 3109.661819] ata1.00: supports DRM functions and may not be fully accessible [ 3109.662338] ata1.00: disabling queued TRIM support [ 3109.662443] ata4.00: supports DRM functions and may not be fully accessible [ 3109.662878] ata4.00: disabling queued TRIM support [ 3109.663728] ata1.00: configured for UDMA/133 [ 3109.663761] ahci 0000:00:17.0: port does not support device sleep [ 3109.664561] ata4.00: configured for UDMA/133 [ 3109.664628] ahci 0000:00:17.0: port does not support device sleep [ 3109.664802] ata4.00: Enabling discard_zeroes_data [ 3109.672207] leds input3::numlock: led_trigger_set: Error sending uevent [ 3109.672220] leds input3::capslock: led_trigger_set: Error sending uevent [ 3109.672231] leds input3::scrolllock: led_trigger_set: Error sending uevent [ 3109.723204] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [ 3110.997472] r8169 0000:07:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3113.746456] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input20 [ 3113.751851] leds input20::numlock: led_trigger_set: Error sending uevent [ 3113.751875] leds input20::capslock: led_trigger_set: Error sending uevent [ 3113.751885] leds input20::scrolllock: led_trigger_set: Error sending uevent [ 3114.068527] acpi LNXPOWER:04: Turning OFF [ 3114.071402] acpi LNXPOWER:00: Turning OFF [ 3114.074290] OOM killer enabled. [ 3114.076248] Restarting tasks ... done. [ 3114.081420] PM: suspend exit [ 3114.277322] userif-3: sent link down event. [ 3114.280419] userif-3: sent link up event. [ 3317.830392] PM: suspend entry (deep) [ 3317.835756] Filesystems sync: 0.002 seconds [ 3317.838962] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 3317.846939] OOM killer disabled. [ 3317.848973] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done. [ 3317.858823] printk: Suspending console(s) (use no_console_suspend to debug) [ 3317.911539] serial 00:03: disabled [ 3317.911591] r8169 0000:07:00.0 eth0: Link is Down [ 3317.917188] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 3317.917198] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3317.917347] sd 1:0:0:0: [sdb] Stopping disk [ 3317.918185] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 3317.918302] sd 3:0:0:0: [sdc] Stopping disk [ 3317.918617] sd 0:0:0:0: [sda] Stopping disk [ 3319.114535] ACPI: Preparing to enter system sleep state S3 [ 3319.323762] PM: Saving platform NVS memory [ 3319.323789] Disabling non-boot CPUs ... [ 3319.325732] smpboot: CPU 1 is now offline [ 3319.328851] smpboot: CPU 2 is now offline [ 3319.331175] smpboot: CPU 3 is now offline [ 3319.333498] smpboot: CPU 4 is now offline [ 3319.335820] smpboot: CPU 5 is now offline [ 3319.339926] smpboot: CPU 6 is now offline [ 3319.341232] smpboot: CPU 7 is now offline [ 3319.342512] smpboot: CPU 8 is now offline [ 3319.343810] smpboot: CPU 9 is now offline [ 3319.345102] smpboot: CPU 10 is now offline [ 3319.346447] smpboot: CPU 11 is now offline [ 3319.348410] ACPI: Low-level resume complete [ 3319.348454] PM: Restoring platform NVS memory [ 3319.349170] Enabling non-boot CPUs ... [ 3319.349189] x86: Booting SMP configuration: [ 3319.349190] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3319.349987] ACPI: \_SB_.PR01: Found 2 idle states [ 3319.350139] CPU1 is up [ 3319.350151] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 3319.350796] ACPI: \_SB_.PR02: Found 2 idle states [ 3319.350911] CPU2 is up [ 3319.350920] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 3319.351561] ACPI: \_SB_.PR03: Found 2 idle states [ 3319.351680] CPU3 is up [ 3319.351699] smpboot: Booting Node 0 Processor 4 APIC 0x8 [ 3319.352338] ACPI: \_SB_.PR04: Found 2 idle states [ 3319.352459] CPU4 is up [ 3319.352470] smpboot: Booting Node 0 Processor 5 APIC 0xa [ 3319.353120] ACPI: \_SB_.PR05: Found 2 idle states [ 3319.353245] CPU5 is up [ 3319.353254] smpboot: Booting Node 0 Processor 6 APIC 0x1 [ 3319.353963] ACPI: \_SB_.PR06: Found 2 idle states [ 3319.354141] CPU6 is up [ 3319.354152] smpboot: Booting Node 0 Processor 7 APIC 0x3 [ 3319.354790] ACPI: \_SB_.PR07: Found 2 idle states [ 3319.354924] CPU7 is up [ 3319.354934] smpboot: Booting Node 0 Processor 8 APIC 0x5 [ 3319.355573] ACPI: \_SB_.PR08: Found 2 idle states [ 3319.355721] CPU8 is up [ 3319.355731] smpboot: Booting Node 0 Processor 9 APIC 0x7 [ 3319.356365] ACPI: \_SB_.PR09: Found 2 idle states [ 3319.356509] CPU9 is up [ 3319.356520] smpboot: Booting Node 0 Processor 10 APIC 0x9 [ 3319.357161] ACPI: \_SB_.PR10: Found 2 idle states [ 3319.357315] CPU10 is up [ 3319.357324] smpboot: Booting Node 0 Processor 11 APIC 0xb [ 3319.358037] ACPI: \_SB_.PR11: Found 2 idle states [ 3319.358196] CPU11 is up [ 3319.360447] ACPI: Waking up from system sleep state S3 [ 3319.402834] sd 3:0:0:0: [sdc] Starting disk [ 3319.402849] sd 1:0:0:0: [sdb] Starting disk [ 3319.402857] sd 0:0:0:0: [sda] Starting disk [ 3319.404035] serial 00:03: activated [ 3319.404160] i915 0000:00:02.0: [drm] GuC is uninitialized [ 3319.526826] r8169 0000:07:00.0 eth0: Link is Down [ 3319.666986] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [ 3319.723422] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3319.723448] ata3: SATA link down (SStatus 4 SControl 300) [ 3319.723478] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3319.723550] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3319.723575] ata6: SATA link down (SStatus 4 SControl 300) [ 3319.723696] ata1.00: supports DRM functions and may not be fully accessible [ 3319.723729] ata4.00: supports DRM functions and may not be fully accessible [ 3319.724183] ata4.00: disabling queued TRIM support [ 3319.724357] ata1.00: disabling queued TRIM support [ 3319.725939] ata1.00: supports DRM functions and may not be fully accessible [ 3319.726175] ata4.00: supports DRM functions and may not be fully accessible [ 3319.726594] ata1.00: disabling queued TRIM support [ 3319.726712] ata4.00: disabling queued TRIM support [ 3319.728009] ata1.00: configured for UDMA/133 [ 3319.728071] ahci 0000:00:17.0: port does not support device sleep [ 3319.728340] ata4.00: configured for UDMA/133 [ 3319.728406] ahci 0000:00:17.0: port does not support device sleep [ 3319.728681] ata4.00: Enabling discard_zeroes_data [ 3319.740790] ata5.00: configured for UDMA/133 [ 3320.314170] acpi LNXPOWER:04: Turning OFF [ 3320.317046] acpi LNXPOWER:00: Turning OFF [ 3320.319939] OOM killer enabled. [ 3320.321918] Restarting tasks ... done. [ 3320.326151] PM: suspend exit [ 3320.522686] userif-3: sent link down event. [ 3320.525765] userif-3: sent link up event. [ 3321.055073] r8169 0000:07:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3321.262613] userif-3: sent link down event. [ 3321.265765] userif-3: sent link up event. [ 3323.936802] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3323.965756] ata2.00: configured for UDMA/133 [ 3330.418786] si2157 7-0060: found a 'Silicon Labs Si2157-A30' [ 3330.472563] si2157 7-0060: firmware version: 3.0.5 [ 3330.564815] si2157 7-0062: found a 'Silicon Labs Si2157-A30' [ 3330.618541] si2157 7-0062: firmware version: 3.0.5 [ 3330.709780] si2157 12-0060: found a 'Silicon Labs Si2157-A30' [ 3330.763592] si2157 12-0060: firmware version: 3.0.5 [ 3330.855624] si2157 12-0062: found a 'Silicon Labs Si2157-A30' [ 3330.909710] si2157 12-0062: firmware version: 3.0.5 [ 3342.437522] cx23885: cx23885 driver version 0.0.4 loaded [ 3342.441889] cx23885: CORE cx23885[0]: subsystem: 0070:6a28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 3342.795463] tveeprom: Hauppauge model 166200, rev B4I6, serial# 4036033296 [ 3342.801465] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 3342.805560] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 3342.811026] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 3342.816150] tveeprom: audio processor is CX23885 (idx 39) [ 3342.820518] tveeprom: decoder processor is CX23885 (idx 33) [ 3342.825077] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 3342.831050] cx23885: cx23885[0]: hauppauge eeprom: model=166200 [ 3342.835972] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 3342.841406] cx23885: cx23885[0]: cx23885 based dvb card [ 3342.845701] cx23885: dvb_register(): board=60 port=1 [ 3342.852347] i2c i2c-6: Added multiplexed i2c bus 9 [ 3342.856156] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified [ 3342.862122] si2168 6-0064: firmware version: B 4.0.2 [ 3342.867516] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 3342.874288] dvbdev: DVB: registering new adapter (cx23885[0]) [ 3342.879084] cx23885 0000:05:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 3342.887459] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 3342.892811] cx23885: cx23885[0]: cx23885 based dvb card [ 3342.896983] cx23885: dvb_register(): board=60 port=2 [ 3342.907442] i2c i2c-6: Added multiplexed i2c bus 10 [ 3342.911241] si2168 6-0066: Silicon Labs Si2168-B40 successfully identified [ 3342.917156] si2168 6-0066: firmware version: B 4.0.2 [ 3342.922384] si2157 7-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 3342.929137] dvbdev: DVB: registering new adapter (cx23885[0]) [ 3342.933850] cx23885 0000:05:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 3342.942130] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 3342.947973] cx23885: cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 18, latency: 0, mmio: 0xa1200000 [ 3342.956650] cx23885: CORE cx23885[1]: subsystem: 0070:6b28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 3343.315433] tveeprom: Hauppauge model 166201, rev B4I6, serial# 4036033296 [ 3343.321423] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 3343.325628] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 3343.331069] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 3343.336305] tveeprom: audio processor is CX23885 (idx 39) [ 3343.340716] tveeprom: decoder processor is CX23885 (idx 33) [ 3343.345258] tveeprom: has no radio [ 3343.347531] cx23885: cx23885[1]: hauppauge eeprom: model=166201 [ 3343.352542] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 3343.352542] cx23885: cx23885[1]: cx23885 based dvb card [ 3343.352544] cx23885: dvb_register(): board=60 port=1 [ 3343.359205] i2c i2c-11: Added multiplexed i2c bus 14 [ 3343.370081] si2168 11-0064: Silicon Labs Si2168-B40 successfully identified [ 3343.376124] si2168 11-0064: firmware version: B 4.0.2 [ 3343.381640] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 3343.388520] dvbdev: DVB: registering new adapter (cx23885[1]) [ 3343.393212] cx23885 0000:06:00.0: DVB: registering adapter 2 frontend 0 (Silicon Labs Si2168)... [ 3343.401524] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 3343.406865] cx23885: cx23885[1]: cx23885 based dvb card [ 3343.411017] cx23885: dvb_register(): board=60 port=2 [ 3343.421283] i2c i2c-11: Added multiplexed i2c bus 15 [ 3343.425178] si2168 11-0066: Silicon Labs Si2168-B40 successfully identified [ 3343.431194] si2168 11-0066: firmware version: B 4.0.2 [ 3343.436398] si2157 12-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 3343.443217] dvbdev: DVB: registering new adapter (cx23885[1]) [ 3343.447914] cx23885 0000:06:00.0: DVB: registering adapter 3 frontend 0 (Silicon Labs Si2168)... [ 3343.456187] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 3343.462022] cx23885: cx23885[1]/0: found at 0000:06:00.0, rev: 3, irq: 19, latency: 0, mmio: 0xa1000000 [ 3346.569360] cx23885: cx23885 driver version 0.0.4 loaded [ 3346.574060] cx23885: CORE cx23885[0]: subsystem: 0070:6a28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 3346.931203] tveeprom: Hauppauge model 166200, rev B4I6, serial# 4036033296 [ 3346.937158] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 3346.941254] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 3346.946638] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 3346.951749] tveeprom: audio processor is CX23885 (idx 39) [ 3346.956133] tveeprom: decoder processor is CX23885 (idx 33) [ 3346.960685] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 3346.966621] cx23885: cx23885[0]: hauppauge eeprom: model=166200 [ 3346.971554] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 3346.976919] cx23885: cx23885[0]: cx23885 based dvb card [ 3346.981129] cx23885: dvb_register(): board=60 port=1 [ 3346.991630] i2c i2c-6: Added multiplexed i2c bus 9 [ 3346.995353] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified [ 3347.001249] si2168 6-0064: firmware version: B 4.0.2 [ 3347.006435] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 3347.013179] dvbdev: DVB: registering new adapter (cx23885[0]) [ 3347.017901] cx23885 0000:05:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 3347.026170] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 3347.031579] cx23885: cx23885[0]: cx23885 based dvb card [ 3347.035738] cx23885: dvb_register(): board=60 port=2 [ 3347.046173] i2c i2c-6: Added multiplexed i2c bus 10 [ 3347.049964] si2168 6-0066: Silicon Labs Si2168-B40 successfully identified [ 3347.055857] si2168 6-0066: firmware version: B 4.0.2 [ 3347.061147] si2157 7-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 3347.067883] dvbdev: DVB: registering new adapter (cx23885[0]) [ 3347.072603] cx23885 0000:05:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 3347.080876] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 3347.086725] cx23885: cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 18, latency: 0, mmio: 0xa1200000 [ 3347.095407] cx23885: CORE cx23885[1]: subsystem: 0070:6b28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 3347.451137] tveeprom: Hauppauge model 166201, rev B4I6, serial# 4036033296 [ 3347.457027] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 3347.461095] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 3347.466501] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 3347.471625] tveeprom: audio processor is CX23885 (idx 39) [ 3347.475969] tveeprom: decoder processor is CX23885 (idx 33) [ 3347.480571] tveeprom: has no radio [ 3347.482862] cx23885: cx23885[1]: hauppauge eeprom: model=166201 [ 3347.487775] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 3347.493142] cx23885: cx23885[1]: cx23885 based dvb card [ 3347.497294] cx23885: dvb_register(): board=60 port=1 [ 3347.507719] i2c i2c-11: Added multiplexed i2c bus 14 [ 3347.511605] si2168 11-0064: Silicon Labs Si2168-B40 successfully identified [ 3347.517619] si2168 11-0064: firmware version: B 4.0.2 [ 3347.522945] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 3347.529763] dvbdev: DVB: registering new adapter (cx23885[1]) [ 3347.534471] cx23885 0000:06:00.0: DVB: registering adapter 2 frontend 0 (Silicon Labs Si2168)... [ 3347.542646] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 3347.548060] cx23885: cx23885[1]: cx23885 based dvb card [ 3347.552223] cx23885: dvb_register(): board=60 port=2 [ 3347.562577] i2c i2c-11: Added multiplexed i2c bus 15 [ 3347.566454] si2168 11-0066: Silicon Labs Si2168-B40 successfully identified [ 3347.572480] si2168 11-0066: firmware version: B 4.0.2 [ 3347.577794] si2157 12-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 3347.584607] dvbdev: DVB: registering new adapter (cx23885[1]) [ 3347.589325] cx23885 0000:06:00.0: DVB: registering adapter 3 frontend 0 (Silicon Labs Si2168)... [ 3347.589524] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 3347.603108] cx23885: cx23885[1]/0: found at 0000:06:00.0, rev: 3, irq: 19, latency: 0, mmio: 0xa1000000 [ 3379.460337] si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 3380.125085] si2168 6-0064: firmware version: B 4.0.11 [ 3380.140192] si2168 6-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 3380.804671] si2168 6-0066: firmware version: B 4.0.11 [ 3380.819711] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 3381.484011] si2168 11-0064: firmware version: B 4.0.11 [ 3381.499198] si2168 11-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 3382.163380] si2168 11-0066: firmware version: B 4.0.11 [ 4301.690691] PM: suspend entry (deep) [ 4301.697372] Filesystems sync: 0.004 seconds [ 4301.701207] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 4301.711811] OOM killer disabled. [ 4301.713940] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4301.722098] printk: Suspending console(s) (use no_console_suspend to debug) [ 4301.775292] serial 00:03: disabled [ 4301.775366] r8169 0000:07:00.0 eth0: Link is Down [ 4301.781102] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 4301.781114] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4301.781115] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 4301.781226] sd 3:0:0:0: [sdc] Stopping disk [ 4301.781270] sd 1:0:0:0: [sdb] Stopping disk [ 4301.782610] sd 0:0:0:0: [sda] Stopping disk [ 4303.397279] ACPI: Preparing to enter system sleep state S3 [ 4303.606479] PM: Saving platform NVS memory [ 4303.606506] Disabling non-boot CPUs ... [ 4303.608480] smpboot: CPU 1 is now offline [ 4303.611617] smpboot: CPU 2 is now offline [ 4303.614719] smpboot: CPU 3 is now offline [ 4303.617432] smpboot: CPU 4 is now offline [ 4303.619754] smpboot: CPU 5 is now offline [ 4303.622878] smpboot: CPU 6 is now offline [ 4303.625169] smpboot: CPU 7 is now offline [ 4303.626485] smpboot: CPU 8 is now offline [ 4303.627832] smpboot: CPU 9 is now offline [ 4303.629163] smpboot: CPU 10 is now offline [ 4303.630515] smpboot: CPU 11 is now offline [ 4303.632507] ACPI: Low-level resume complete [ 4303.632550] PM: Restoring platform NVS memory [ 4303.633269] Enabling non-boot CPUs ... [ 4303.633288] x86: Booting SMP configuration: [ 4303.633289] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 4303.634063] ACPI: \_SB_.PR01: Found 2 idle states [ 4303.634221] CPU1 is up [ 4303.634233] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 4303.634855] ACPI: \_SB_.PR02: Found 2 idle states [ 4303.634974] CPU2 is up [ 4303.634983] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 4303.635612] ACPI: \_SB_.PR03: Found 2 idle states [ 4303.635730] CPU3 is up [ 4303.635740] smpboot: Booting Node 0 Processor 4 APIC 0x8 [ 4303.636367] ACPI: \_SB_.PR04: Found 2 idle states [ 4303.636494] CPU4 is up [ 4303.636503] smpboot: Booting Node 0 Processor 5 APIC 0xa [ 4303.637130] ACPI: \_SB_.PR05: Found 2 idle states [ 4303.637255] CPU5 is up [ 4303.637263] smpboot: Booting Node 0 Processor 6 APIC 0x1 [ 4303.637931] ACPI: \_SB_.PR06: Found 2 idle states [ 4303.638109] CPU6 is up [ 4303.638120] smpboot: Booting Node 0 Processor 7 APIC 0x3 [ 4303.638738] ACPI: \_SB_.PR07: Found 2 idle states [ 4303.638872] CPU7 is up [ 4303.638881] smpboot: Booting Node 0 Processor 8 APIC 0x5 [ 4303.639506] ACPI: \_SB_.PR08: Found 2 idle states [ 4303.639647] CPU8 is up [ 4303.639657] smpboot: Booting Node 0 Processor 9 APIC 0x7 [ 4303.640279] ACPI: \_SB_.PR09: Found 2 idle states [ 4303.640433] CPU9 is up [ 4303.640443] smpboot: Booting Node 0 Processor 10 APIC 0x9 [ 4303.641096] ACPI: \_SB_.PR10: Found 2 idle states [ 4303.641251] CPU10 is up [ 4303.641260] smpboot: Booting Node 0 Processor 11 APIC 0xb [ 4303.641926] ACPI: \_SB_.PR11: Found 2 idle states [ 4303.642090] CPU11 is up [ 4303.644357] ACPI: Waking up from system sleep state S3 [ 4303.684756] sd 1:0:0:0: [sdb] Starting disk [ 4303.684767] sd 3:0:0:0: [sdc] Starting disk [ 4303.684776] sd 0:0:0:0: [sda] Starting disk [ 4303.685131] serial 00:03: activated [ 4303.685196] i915 0000:00:02.0: [drm] GuC is uninitialized [ 4303.847479] r8169 0000:07:00.0 eth0: Link is Down [ 4304.006129] ata6: SATA link down (SStatus 4 SControl 300) [ 4304.006281] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4304.006350] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4304.006479] ata3: SATA link down (SStatus 4 SControl 300) [ 4304.006517] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4304.006625] ata1.00: supports DRM functions and may not be fully accessible [ 4304.006637] ata4.00: supports DRM functions and may not be fully accessible [ 4304.007089] ata4.00: disabling queued TRIM support [ 4304.008100] ata1.00: disabling queued TRIM support [ 4304.009063] ata4.00: supports DRM functions and may not be fully accessible [ 4304.009556] ata4.00: disabling queued TRIM support [ 4304.009777] ata1.00: supports DRM functions and may not be fully accessible [ 4304.010327] ata1.00: disabling queued TRIM support [ 4304.011203] ata4.00: configured for UDMA/133 [ 4304.011245] ahci 0000:00:17.0: port does not support device sleep [ 4304.011578] ata4.00: Enabling discard_zeroes_data [ 4304.011736] ata1.00: configured for UDMA/133 [ 4304.011797] ahci 0000:00:17.0: port does not support device sleep [ 4304.023624] ata5.00: configured for UDMA/133 [ 4304.071662] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [ 4304.718222] acpi LNXPOWER:04: Turning OFF [ 4304.721131] acpi LNXPOWER:00: Turning OFF [ 4304.724047] OOM killer enabled. [ 4304.726036] Restarting tasks ... done. [ 4304.731205] PM: suspend exit [ 4305.048809] userif-3: sent link down event. [ 4305.052001] userif-3: sent link up event. [ 4305.379348] r8169 0000:07:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 4305.586836] userif-3: sent link down event. [ 4305.589999] userif-3: sent link up event. [ 4308.012401] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4308.043227] ata2.00: configured for UDMA/133 [ 4438.683831] si2157 7-0060: found a 'Silicon Labs Si2157-A30' [ 4438.737564] si2157 7-0060: firmware version: 3.0.5 [ 4448.190742] si2157 7-0062: found a 'Silicon Labs Si2157-A30' [ 4448.244053] si2157 7-0062: firmware version: 3.0.5 [ 4448.334737] si2157 12-0060: found a 'Silicon Labs Si2157-A30' [ 4448.388621] si2157 12-0060: firmware version: 3.0.5 [ 4448.480685] si2157 12-0062: found a 'Silicon Labs Si2157-A30' [ 4448.534720] si2157 12-0062: firmware version: 3.0.5 [ 4474.406408] device eth0 entered promiscuous mode [ 4474.410069] bridge-eth0: enabled promiscuous mode [ 4980.343419] cx23885: cx23885 driver version 0.0.4 loaded [ 4980.348005] cx23885: CORE cx23885[0]: subsystem: 0070:6a28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 4980.702001] tveeprom: Hauppauge model 166200, rev B4I6, serial# 4036033296 [ 4980.708118] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 4980.712339] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 4980.717867] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 4980.723007] tveeprom: audio processor is CX23885 (idx 39) [ 4980.727356] tveeprom: decoder processor is CX23885 (idx 33) [ 4980.731898] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 4980.737815] cx23885: cx23885[0]: hauppauge eeprom: model=166200 [ 4980.742729] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 4980.748095] cx23885: cx23885[0]: cx23885 based dvb card [ 4980.752280] cx23885: dvb_register(): board=60 port=1 [ 4980.762769] i2c i2c-6: Added multiplexed i2c bus 9 [ 4980.766472] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified [ 4980.772412] si2168 6-0064: firmware version: B 4.0.2 [ 4980.777724] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 4980.784512] dvbdev: DVB: registering new adapter (cx23885[0]) [ 4980.789235] cx23885 0000:05:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 4980.797589] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 4980.803019] cx23885: cx23885[0]: cx23885 based dvb card [ 4980.807197] cx23885: dvb_register(): board=60 port=2 [ 4980.817604] i2c i2c-6: Added multiplexed i2c bus 10 [ 4980.821409] si2168 6-0066: Silicon Labs Si2168-B40 successfully identified [ 4980.827345] si2168 6-0066: firmware version: B 4.0.2 [ 4980.832755] si2157 7-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 4980.839602] dvbdev: DVB: registering new adapter (cx23885[0]) [ 4980.844354] cx23885 0000:05:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 4980.852584] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 4980.858487] cx23885: cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 18, latency: 0, mmio: 0xa1200000 [ 4980.867337] cx23885: CORE cx23885[1]: subsystem: 0070:6b28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 4981.222059] tveeprom: Hauppauge model 166201, rev B4I6, serial# 4036033296 [ 4981.228191] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 4981.232408] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 4981.237929] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 4981.243098] tveeprom: audio processor is CX23885 (idx 39) [ 4981.247458] tveeprom: decoder processor is CX23885 (idx 33) [ 4981.252009] tveeprom: has no radio [ 4981.254257] cx23885: cx23885[1]: hauppauge eeprom: model=166201 [ 4981.259180] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 4981.264566] cx23885: cx23885[1]: cx23885 based dvb card [ 4981.268743] cx23885: dvb_register(): board=60 port=1 [ 4981.279328] i2c i2c-11: Added multiplexed i2c bus 14 [ 4981.283236] si2168 11-0064: Silicon Labs Si2168-B40 successfully identified [ 4981.289267] si2168 11-0064: firmware version: B 4.0.2 [ 4981.294792] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 4981.301670] dvbdev: DVB: registering new adapter (cx23885[1]) [ 4981.306446] cx23885 0000:06:00.0: DVB: registering adapter 2 frontend 0 (Silicon Labs Si2168)... [ 4981.314705] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 4981.320125] cx23885: cx23885[1]: cx23885 based dvb card [ 4981.324307] cx23885: dvb_register(): board=60 port=2 [ 4981.334750] i2c i2c-11: Added multiplexed i2c bus 15 [ 4981.338651] si2168 11-0066: Silicon Labs Si2168-B40 successfully identified [ 4981.344626] si2168 11-0066: firmware version: B 4.0.2 [ 4981.350186] si2157 12-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 4981.357075] dvbdev: DVB: registering new adapter (cx23885[1]) [ 4981.361834] cx23885 0000:06:00.0: DVB: registering adapter 3 frontend 0 (Silicon Labs Si2168)... [ 4981.369959] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 4981.375863] cx23885: cx23885[1]/0: found at 0000:06:00.0, rev: 3, irq: 19, latency: 0, mmio: 0xa1000000 [ 4986.017643] si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 4986.682437] si2168 6-0064: firmware version: B 4.0.11 [ 4986.697717] si2168 6-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 4987.362705] si2168 6-0066: firmware version: B 4.0.11 [ 4987.377855] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 4988.042395] si2168 11-0064: firmware version: B 4.0.11 [ 4988.057757] si2168 11-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 4988.722322] si2168 11-0066: firmware version: B 4.0.11 [ 5073.495903] device eth0 left promiscuous mode [ 5073.499364] bridge-eth0: disabled promiscuous mode [ 5141.757730] PM: suspend entry (deep) [ 5141.763834] Filesystems sync: 0.003 seconds [ 5141.767426] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 5141.778205] OOM killer disabled. [ 5141.780346] Freezing remaining freezable tasks ... (elapsed 0.016 seconds) done. [ 5141.803549] printk: Suspending console(s) (use no_console_suspend to debug) [ 5141.857474] serial 00:03: disabled [ 5141.857549] r8169 0000:07:00.0 eth0: Link is Down [ 5141.866852] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 5141.866924] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 5141.866946] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5141.867044] sd 1:0:0:0: [sdb] Stopping disk [ 5141.867047] sd 3:0:0:0: [sdc] Stopping disk [ 5141.868471] sd 0:0:0:0: [sda] Stopping disk [ 5143.534274] ACPI: Preparing to enter system sleep state S3 [ 5143.741516] PM: Saving platform NVS memory [ 5143.741542] Disabling non-boot CPUs ... [ 5143.743512] smpboot: CPU 1 is now offline [ 5143.746650] smpboot: CPU 2 is now offline [ 5143.749755] smpboot: CPU 3 is now offline [ 5143.752816] smpboot: CPU 4 is now offline [ 5143.755842] smpboot: CPU 5 is now offline [ 5143.758944] smpboot: CPU 6 is now offline [ 5143.761897] smpboot: CPU 7 is now offline [ 5143.763210] smpboot: CPU 8 is now offline [ 5143.764547] smpboot: CPU 9 is now offline [ 5143.765858] smpboot: CPU 10 is now offline [ 5143.767213] smpboot: CPU 11 is now offline [ 5143.769181] ACPI: Low-level resume complete [ 5143.769224] PM: Restoring platform NVS memory [ 5143.769944] Enabling non-boot CPUs ... [ 5143.769963] x86: Booting SMP configuration: [ 5143.769964] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 5143.770728] ACPI: \_SB_.PR01: Found 2 idle states [ 5143.770884] CPU1 is up [ 5143.770894] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 5143.771520] ACPI: \_SB_.PR02: Found 2 idle states [ 5143.771636] CPU2 is up [ 5143.771646] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 5143.772271] ACPI: \_SB_.PR03: Found 2 idle states [ 5143.772388] CPU3 is up [ 5143.772397] smpboot: Booting Node 0 Processor 4 APIC 0x8 [ 5143.773028] ACPI: \_SB_.PR04: Found 2 idle states [ 5143.773150] CPU4 is up [ 5143.773160] smpboot: Booting Node 0 Processor 5 APIC 0xa [ 5143.773795] ACPI: \_SB_.PR05: Found 2 idle states [ 5143.773920] CPU5 is up [ 5143.773931] smpboot: Booting Node 0 Processor 6 APIC 0x1 [ 5143.774635] ACPI: \_SB_.PR06: Found 2 idle states [ 5143.774813] CPU6 is up [ 5143.774825] smpboot: Booting Node 0 Processor 7 APIC 0x3 [ 5143.775451] ACPI: \_SB_.PR07: Found 2 idle states [ 5143.775589] CPU7 is up [ 5143.775599] smpboot: Booting Node 0 Processor 8 APIC 0x5 [ 5143.776229] ACPI: \_SB_.PR08: Found 2 idle states [ 5143.776371] CPU8 is up [ 5143.776379] smpboot: Booting Node 0 Processor 9 APIC 0x7 [ 5143.777005] ACPI: \_SB_.PR09: Found 2 idle states [ 5143.777156] CPU9 is up [ 5143.777166] smpboot: Booting Node 0 Processor 10 APIC 0x9 [ 5143.777793] ACPI: \_SB_.PR10: Found 2 idle states [ 5143.777951] CPU10 is up [ 5143.777960] smpboot: Booting Node 0 Processor 11 APIC 0xb [ 5143.778595] ACPI: \_SB_.PR11: Found 2 idle states [ 5143.778757] CPU11 is up [ 5143.781003] ACPI: Waking up from system sleep state S3 [ 5143.823146] i915 0000:00:02.0: [drm] GuC is uninitialized [ 5143.823371] serial 00:03: activated [ 5143.824031] sd 1:0:0:0: [sdb] Starting disk [ 5143.824040] sd 0:0:0:0: [sda] Starting disk [ 5143.824050] sd 3:0:0:0: [sdc] Starting disk [ 5143.986541] r8169 0000:07:00.0 eth0: Link is Down [ 5144.084736] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [ 5144.149467] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5144.149581] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5144.149606] ata6: SATA link down (SStatus 4 SControl 300) [ 5144.149634] ata3: SATA link down (SStatus 4 SControl 300) [ 5144.149690] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5144.149838] ata1.00: supports DRM functions and may not be fully accessible [ 5144.150053] ata4.00: supports DRM functions and may not be fully accessible [ 5144.150481] ata4.00: disabling queued TRIM support [ 5144.152032] ata1.00: disabling queued TRIM support [ 5144.152434] ata4.00: supports DRM functions and may not be fully accessible [ 5144.152959] ata4.00: disabling queued TRIM support [ 5144.153681] ata1.00: supports DRM functions and may not be fully accessible [ 5144.154285] ata1.00: disabling queued TRIM support [ 5144.154726] ata4.00: configured for UDMA/133 [ 5144.154830] ahci 0000:00:17.0: port does not support device sleep [ 5144.155409] ata4.00: Enabling discard_zeroes_data [ 5144.155754] ata1.00: configured for UDMA/133 [ 5144.155837] ahci 0000:00:17.0: port does not support device sleep [ 5144.166361] ata5.00: configured for UDMA/133 [ 5144.732696] acpi LNXPOWER:04: Turning OFF [ 5144.735588] acpi LNXPOWER:00: Turning OFF [ 5144.738480] OOM killer enabled. [ 5144.740462] Restarting tasks ... done. [ 5144.744956] PM: suspend exit [ 5145.160161] userif-3: sent link down event. [ 5145.163339] userif-3: sent link up event. [ 5145.504381] r8169 0000:07:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 5145.711800] userif-3: sent link down event. [ 5145.714994] userif-3: sent link up event. [ 5148.369242] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5148.398426] ata2.00: configured for UDMA/133 [ 5494.621264] si2157 7-0060: found a 'Silicon Labs Si2157-A30' [ 5494.674757] si2157 7-0060: firmware version: 3.0.5 [ 5494.766208] si2157 7-0062: found a 'Silicon Labs Si2157-A30' [ 5494.820108] si2157 7-0062: firmware version: 3.0.5 [ 5494.911394] si2157 12-0060: found a 'Silicon Labs Si2157-A30' [ 5494.965242] si2157 12-0060: firmware version: 3.0.5 [ 5495.057277] si2157 12-0062: found a 'Silicon Labs Si2157-A30' [ 5495.111399] si2157 12-0062: firmware version: 3.0.5 [ 5514.421709] cx23885: cx23885 driver version 0.0.4 loaded [ 5514.426225] cx23885: CORE cx23885[0]: subsystem: 0070:6a28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 5514.784663] tveeprom: Hauppauge model 166200, rev B4I6, serial# 4036033296 [ 5514.790626] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 5514.794735] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 5514.800155] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 5514.805200] tveeprom: audio processor is CX23885 (idx 39) [ 5514.809551] tveeprom: decoder processor is CX23885 (idx 33) [ 5514.814085] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 5514.819997] cx23885: cx23885[0]: hauppauge eeprom: model=166200 [ 5514.824922] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 5514.830289] cx23885: cx23885[0]: cx23885 based dvb card [ 5514.834443] cx23885: dvb_register(): board=60 port=1 [ 5514.844870] i2c i2c-6: Added multiplexed i2c bus 9 [ 5514.848562] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified [ 5514.854505] si2168 6-0064: firmware version: B 4.0.2 [ 5514.859771] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 5514.866560] dvbdev: DVB: registering new adapter (cx23885[0]) [ 5514.871266] cx23885 0000:05:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 5514.879566] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 5514.884975] cx23885: cx23885[0]: cx23885 based dvb card [ 5514.889171] cx23885: dvb_register(): board=60 port=2 [ 5514.899674] i2c i2c-6: Added multiplexed i2c bus 10 [ 5514.903461] si2168 6-0066: Silicon Labs Si2168-B40 successfully identified [ 5514.909347] si2168 6-0066: firmware version: B 4.0.2 [ 5514.914757] si2157 7-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 5514.921516] dvbdev: DVB: registering new adapter (cx23885[0]) [ 5514.926277] cx23885 0000:05:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 5514.934619] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 5514.940462] cx23885: cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 18, latency: 0, mmio: 0xa1200000 [ 5514.949155] cx23885: CORE cx23885[1]: subsystem: 0070:6b28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 5515.304856] tveeprom: Hauppauge model 166201, rev B4I6, serial# 4036033296 [ 5515.310826] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 5515.314917] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 5515.320327] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 5515.325448] tveeprom: audio processor is CX23885 (idx 39) [ 5515.329781] tveeprom: decoder processor is CX23885 (idx 33) [ 5515.334324] tveeprom: has no radio [ 5515.336584] cx23885: cx23885[1]: hauppauge eeprom: model=166201 [ 5515.341576] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 5515.347002] cx23885: cx23885[1]: cx23885 based dvb card [ 5515.351188] cx23885: dvb_register(): board=60 port=1 [ 5515.361685] i2c i2c-11: Added multiplexed i2c bus 14 [ 5515.365605] si2168 11-0064: Silicon Labs Si2168-B40 successfully identified [ 5515.371646] si2168 11-0064: firmware version: B 4.0.2 [ 5515.377215] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 5515.384071] dvbdev: DVB: registering new adapter (cx23885[1]) [ 5515.388832] cx23885 0000:06:00.0: DVB: registering adapter 2 frontend 0 (Silicon Labs Si2168)... [ 5515.397134] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 5515.402570] cx23885: cx23885[1]: cx23885 based dvb card [ 5515.406745] cx23885: dvb_register(): board=60 port=2 [ 5515.417141] i2c i2c-11: Added multiplexed i2c bus 15 [ 5515.421037] si2168 11-0066: Silicon Labs Si2168-B40 successfully identified [ 5515.427046] si2168 11-0066: firmware version: B 4.0.2 [ 5515.432315] si2157 12-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 5515.439182] dvbdev: DVB: registering new adapter (cx23885[1]) [ 5515.443891] cx23885 0000:06:00.0: DVB: registering adapter 3 frontend 0 (Silicon Labs Si2168)... [ 5515.452029] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 5515.457847] cx23885: cx23885[1]/0: found at 0000:06:00.0, rev: 3, irq: 19, latency: 0, mmio: 0xa1000000 [ 5746.723591] device eth0 entered promiscuous mode [ 5746.727196] bridge-eth0: enabled promiscuous mode [ 6236.962827] device eth0 left promiscuous mode [ 6236.966244] bridge-eth0: disabled promiscuous mode [ 6247.426854] PM: suspend entry (deep) [ 6247.435106] Filesystems sync: 0.005 seconds [ 6247.438439] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 6247.447006] OOM killer disabled. [ 6247.449055] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6247.456688] printk: Suspending console(s) (use no_console_suspend to debug) [ 6247.509062] serial 00:03: disabled [ 6247.509079] r8169 0000:07:00.0 eth0: Link is Down [ 6247.515126] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6247.515136] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 6247.515150] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [ 6247.515281] sd 1:0:0:0: [sdb] Stopping disk [ 6247.515282] sd 3:0:0:0: [sdc] Stopping disk [ 6247.516625] sd 0:0:0:0: [sda] Stopping disk [ 6249.173439] ACPI: Preparing to enter system sleep state S3 [ 6249.381688] PM: Saving platform NVS memory [ 6249.381716] Disabling non-boot CPUs ... [ 6249.383688] smpboot: CPU 1 is now offline [ 6249.386842] smpboot: CPU 2 is now offline [ 6249.389950] smpboot: CPU 3 is now offline [ 6249.393000] smpboot: CPU 4 is now offline [ 6249.396651] smpboot: CPU 5 is now offline [ 6249.398944] smpboot: CPU 6 is now offline [ 6249.401875] smpboot: CPU 7 is now offline [ 6249.403893] smpboot: CPU 8 is now offline [ 6249.405917] smpboot: CPU 9 is now offline [ 6249.408074] smpboot: CPU 10 is now offline [ 6249.410099] smpboot: CPU 11 is now offline [ 6249.414479] ACPI: Low-level resume complete [ 6249.414523] PM: Restoring platform NVS memory [ 6249.415310] Enabling non-boot CPUs ... [ 6249.415331] x86: Booting SMP configuration: [ 6249.415332] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6249.416095] ACPI: \_SB_.PR01: Found 2 idle states [ 6249.416250] CPU1 is up [ 6249.416261] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 6249.416880] ACPI: \_SB_.PR02: Found 2 idle states [ 6249.416991] CPU2 is up [ 6249.417001] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 6249.417630] ACPI: \_SB_.PR03: Found 2 idle states [ 6249.417748] CPU3 is up [ 6249.417757] smpboot: Booting Node 0 Processor 4 APIC 0x8 [ 6249.418380] ACPI: \_SB_.PR04: Found 2 idle states [ 6249.418499] CPU4 is up [ 6249.418509] smpboot: Booting Node 0 Processor 5 APIC 0xa [ 6249.419141] ACPI: \_SB_.PR05: Found 2 idle states [ 6249.419266] CPU5 is up [ 6249.419276] smpboot: Booting Node 0 Processor 6 APIC 0x1 [ 6249.419982] ACPI: \_SB_.PR06: Found 2 idle states [ 6249.420159] CPU6 is up [ 6249.420170] smpboot: Booting Node 0 Processor 7 APIC 0x3 [ 6249.420808] ACPI: \_SB_.PR07: Found 2 idle states [ 6249.420944] CPU7 is up [ 6249.420953] smpboot: Booting Node 0 Processor 8 APIC 0x5 [ 6249.421574] ACPI: \_SB_.PR08: Found 2 idle states [ 6249.421720] CPU8 is up [ 6249.421729] smpboot: Booting Node 0 Processor 9 APIC 0x7 [ 6249.422355] ACPI: \_SB_.PR09: Found 2 idle states [ 6249.422502] CPU9 is up [ 6249.422512] smpboot: Booting Node 0 Processor 10 APIC 0x9 [ 6249.423161] ACPI: \_SB_.PR10: Found 2 idle states [ 6249.423317] CPU10 is up [ 6249.423326] smpboot: Booting Node 0 Processor 11 APIC 0xb [ 6249.423996] ACPI: \_SB_.PR11: Found 2 idle states [ 6249.424157] CPU11 is up [ 6249.426379] ACPI: Waking up from system sleep state S3 [ 6249.465732] sd 3:0:0:0: [sdc] Starting disk [ 6249.465755] sd 0:0:0:0: [sda] Starting disk [ 6249.465788] sd 1:0:0:0: [sdb] Starting disk [ 6249.466561] i915 0000:00:02.0: [drm] GuC is uninitialized [ 6249.466812] serial 00:03: activated [ 6249.611762] r8169 0000:07:00.0 eth0: Link is Down [ 6249.728952] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [ 6249.791375] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6249.791531] ata3: SATA link down (SStatus 4 SControl 300) [ 6249.791561] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6249.791610] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6249.791649] ata6: SATA link down (SStatus 4 SControl 300) [ 6249.791909] ata1.00: supports DRM functions and may not be fully accessible [ 6249.791929] ata4.00: supports DRM functions and may not be fully accessible [ 6249.792373] ata4.00: disabling queued TRIM support [ 6249.793392] ata1.00: disabling queued TRIM support [ 6249.794385] ata4.00: supports DRM functions and may not be fully accessible [ 6249.794929] ata4.00: disabling queued TRIM support [ 6249.795027] ata1.00: supports DRM functions and may not be fully accessible [ 6249.795662] ata1.00: disabling queued TRIM support [ 6249.796668] ata4.00: configured for UDMA/133 [ 6249.796772] ahci 0000:00:17.0: port does not support device sleep [ 6249.797107] ata4.00: Enabling discard_zeroes_data [ 6249.797205] ata1.00: configured for UDMA/133 [ 6249.797423] ahci 0000:00:17.0: port does not support device sleep [ 6249.808476] ata5.00: configured for UDMA/133 [ 6250.372001] acpi LNXPOWER:04: Turning OFF [ 6250.374858] acpi LNXPOWER:00: Turning OFF [ 6250.377693] OOM killer enabled. [ 6250.379636] Restarting tasks ... done. [ 6250.385485] PM: suspend exit [ 6250.473639] cx23885: cx23885 driver version 0.0.4 loaded [ 6250.478067] cx23885: CORE cx23885[0]: subsystem: 0070:6a28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 6250.818350] userif-3: sent link down event. [ 6250.821528] userif-3: sent link up event. [ 6250.833706] tveeprom: Hauppauge model 166200, rev B4I6, serial# 4036033296 [ 6250.839789] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 6250.843993] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 6250.849523] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 6250.854730] tveeprom: audio processor is CX23885 (idx 39) [ 6250.859134] tveeprom: decoder processor is CX23885 (idx 33) [ 6250.863665] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 6250.869521] cx23885: cx23885[0]: hauppauge eeprom: model=166200 [ 6250.874406] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 6250.879724] cx23885: cx23885[0]: cx23885 based dvb card [ 6250.883872] cx23885: dvb_register(): board=60 port=1 [ 6250.890406] i2c i2c-6: Added multiplexed i2c bus 9 [ 6250.894148] si2168 6-0064: Silicon Labs Si2168-B40 successfully identified [ 6250.899989] si2168 6-0064: firmware version: B 4.0.2 [ 6250.905332] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 6250.911994] dvbdev: DVB: registering new adapter (cx23885[0]) [ 6250.916656] cx23885 0000:05:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 6250.924696] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 6250.930036] cx23885: cx23885[0]: cx23885 based dvb card [ 6250.934167] cx23885: dvb_register(): board=60 port=2 [ 6250.944599] i2c i2c-6: Added multiplexed i2c bus 10 [ 6250.948365] si2168 6-0066: Silicon Labs Si2168-B40 successfully identified [ 6250.954205] si2168 6-0066: firmware version: B 4.0.2 [ 6250.959467] si2157 7-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 6250.966136] dvbdev: DVB: registering new adapter (cx23885[0]) [ 6250.970830] cx23885 0000:05:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 6250.978991] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 6250.984790] cx23885: cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 18, latency: 0, mmio: 0xa1200000 [ 6250.993464] cx23885: CORE cx23885[1]: subsystem: 0070:6b28, board: Hauppauge WinTV-QuadHD-DVB(885) [card=60,autodetected] [ 6251.208196] r8169 0000:07:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 6251.346014] tveeprom: Hauppauge model 166201, rev B4I6, serial# 4036033296 [ 6251.352093] tveeprom: MAC address is 00:0d:fe:90:fb:10 [ 6251.356296] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 6251.361808] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 6251.367026] tveeprom: audio processor is CX23885 (idx 39) [ 6251.371441] tveeprom: decoder processor is CX23885 (idx 33) [ 6251.376036] tveeprom: has no radio [ 6251.378271] cx23885: cx23885[1]: hauppauge eeprom: model=166201 [ 6251.383120] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 6251.388417] cx23885: cx23885[1]: cx23885 based dvb card [ 6251.388419] cx23885: dvb_register(): board=60 port=1 [ 6251.402965] i2c i2c-11: Added multiplexed i2c bus 14 [ 6251.406821] si2168 11-0064: Silicon Labs Si2168-B40 successfully identified [ 6251.412739] si2168 11-0064: firmware version: B 4.0.2 [ 6251.416764] userif-3: sent link down event. [ 6251.418057] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 6251.419780] userif-3: sent link up event. [ 6251.426514] dvbdev: DVB: registering new adapter (cx23885[1]) [ 6251.434028] cx23885 0000:06:00.0: DVB: registering adapter 2 frontend 0 (Silicon Labs Si2168)... [ 6251.442236] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 6251.447581] cx23885: cx23885[1]: cx23885 based dvb card [ 6251.451687] cx23885: dvb_register(): board=60 port=2 [ 6251.462006] i2c i2c-11: Added multiplexed i2c bus 15 [ 6251.465850] si2168 11-0066: Silicon Labs Si2168-B40 successfully identified [ 6251.471768] si2168 11-0066: firmware version: B 4.0.2 [ 6251.477291] si2157 12-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 6251.484070] dvbdev: DVB: registering new adapter (cx23885[1]) [ 6251.488734] cx23885 0000:06:00.0: DVB: registering adapter 3 frontend 0 (Silicon Labs Si2168)... [ 6251.496770] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa4 [ 6251.502570] cx23885: cx23885[1]/0: found at 0000:06:00.0, rev: 3, irq: 19, latency: 0, mmio: 0xa1000000 [ 6254.424321] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6254.453398] ata2.00: configured for UDMA/133 [ 6258.641003] si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 6259.102164] device eth0 entered promiscuous mode [ 6259.105755] bridge-eth0: enabled promiscuous mode [ 6259.305943] si2168 6-0064: firmware version: B 4.0.11 [ 6259.316857] si2157 7-0060: found a 'Silicon Labs Si2157-A30' [ 6259.370775] si2157 7-0060: firmware version: 3.0.5 [ 6259.385890] si2168 6-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 6260.051154] si2168 6-0066: firmware version: B 4.0.11 [ 6260.062045] si2157 7-0062: found a 'Silicon Labs Si2157-A30' [ 6260.115477] si2157 7-0062: firmware version: 3.0.5 [ 6260.130459] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 6260.795564] si2168 11-0064: firmware version: B 4.0.11 [ 6260.806648] si2157 12-0060: found a 'Silicon Labs Si2157-A30' [ 6260.860787] si2157 12-0060: firmware version: 3.0.5 [ 6260.875931] si2168 11-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 6261.540351] si2168 11-0066: firmware version: B 4.0.11 [ 6261.551434] si2157 12-0062: found a 'Silicon Labs Si2157-A30' [ 6261.605839] si2157 12-0062: firmware version: 3.0.5