linux-kernel - [PATCH] ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231211070345.2792-1-mihai.sain@microchip.com>
Date:   Mon, 11 Dec 2023 09:03:45 +0200
From:   Mihai Sain <mihai.sain@...rochip.com>
To:     <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <conor+dt@...nel.org>, <nicolas.ferre@...rochip.com>,
        <alexandre.belloni@...tlin.com>, <claudiu.beznea@...on.dev>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
CC:     <cristian.birsan@...rochip.com>,
        Mihai Sain <mihai.sain@...rochip.com>
Subject: [PATCH] ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node

On board the sdmmc0 interface is wired to a SD Card socket.
According with mmc-controller bindings, the mmc-ddr-3_3v property
is used for eMMC devices to enable high-speed DDR mode (3.3V I/O).
Remove the mmc-ddr-3_3v property from sdmmc0 node.

Signed-off-by: Mihai Sain <mihai.sain@...rochip.com>
---
 arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
index d0a6dbd377df..f3ffb8f01d8a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
@@ -54,7 +54,6 @@ usb2: ehci@...000 {
 
 		sdmmc0: sdio-host@...00000 {
 			bus-width = <8>;
-			mmc-ddr-3_3v;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			status = "okay";
-- 
2.43.0