linux-kernel - [PATCH V4 0/3] Add rs485 support to uartps driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231211091159.58564-1-manikanta.guntupalli@amd.com>
Date:   Mon, 11 Dec 2023 14:41:56 +0530
From:   Manikanta Guntupalli <manikanta.guntupalli@....com>
To:     <git@....com>, <michal.simek@....com>,
        <gregkh@...uxfoundation.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <linux-serial@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <jirislaby@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>
CC:     <radhey.shyam.pandey@....com>, <srinivas.goud@....com>,
        <shubhrajyoti.datta@....com>, <manion05gk@...il.com>,
        Manikanta Guntupalli <manikanta.guntupalli@....com>
Subject: [PATCH V4 0/3] Add rs485 support to uartps driver

Add optional gpio property to uartps node to support rs485.
Add rs485 support to uartps driver.
---
Changes for V2:
Modify optional gpio name to xlnx,phy-ctrl-gpios.
Update commit description.
Add support for RTS, delay_rts_before_send and delay_rts_after_send in RS485 mode.

Changes for V3:
Modify optional gpio name to rts-gpios.
Update commit description.
Move cdns_uart_tx_empty function to avoid prototype statement.
Remove assignment of struct serial_rs485 to port->rs485 as
serial core performs that.
Switch to native RTS in non GPIO case.
Handle rs485 during stop tx.
Remove explicit calls to configure gpio direction and value,
as devm_gpiod_get_optional performs that by using GPIOD_OUT_LOW argument.
Update implementation to support configuration of GPIO/RTS value
based on user configuration of SER_RS485_RTS_ON_SEND and
SER_RS485_RTS_AFTER_SEND. Move implementation to start_tx from handle_tx.

Changes for V4:
Update rts-gpios description.
Create separate patch for cdns_uart_tx_empty relocation.
Call cdns_rs485_rx_setup() before uart_add_one_port() in probe.
Update gpio descriptor name to gpiod_rts.
Instead of cdns_rs485_config_gpio_rts_high() and
cdns_rs485_config_gpio_rts_low() functions for RTS/GPIO value
configuration implement cdns_rts_gpio_enable().
Disable auto rts and call cdns_uart_stop_tx() from cdns_rs485_config.
Use timer instead of mdelay for delay_rts_before_send and delay_rts_after_send.
Update cdns_uart_set_mctrl to support GPIO/RTS.

Manikanta Guntupalli (3):
  dt-bindings: Add optional gpio property to uartps node to support
    rs485
  tty: serial: uartps: Relocate cdns_uart_tx_empty to facilitate rs485
  tty: serial: uartps: Add rs485 support to uartps driver

 .../devicetree/bindings/serial/cdns,uart.yaml |   5 +
 drivers/tty/serial/xilinx_uartps.c            | 244 ++++++++++++++++--
 2 files changed, 225 insertions(+), 24 deletions(-)

-- 
2.25.1