linux-kernel - Re: [RFC PATCH net-next v3 01/13] net: phy: Introduce ethernet link topology representation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231211120623.03b1ced4@device.home>
Date:   Mon, 11 Dec 2023 12:06:23 +0100
From:   Maxime Chevallier <maxime.chevallier@...tlin.com>
To:     Simon Horman <horms@...nel.org>
Cc:     davem@...emloft.net, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, thomas.petazzoni@...tlin.com,
        Andrew Lunn <andrew@...n.ch>, Jakub Kicinski <kuba@...nel.org>,
        Eric Dumazet <edumazet@...gle.com>,
        Paolo Abeni <pabeni@...hat.com>,
        Russell King <linux@...linux.org.uk>,
        linux-arm-kernel@...ts.infradead.org,
        Christophe Leroy <christophe.leroy@...roup.eu>,
        Herve Codina <herve.codina@...tlin.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Vladimir Oltean <vladimir.oltean@....com>,
        Köry Maincent <kory.maincent@...tlin.com>,
        Jesse Brandeburg <jesse.brandeburg@...el.com>,
        Jonathan Corbet <corbet@....net>,
        Marek Behún <kabel@...nel.org>,
        Piergiorgio Beruto <piergiorgio.beruto@...il.com>,
        Oleksij Rempel <o.rempel@...gutronix.de>,
        Nicolò Veronese <nicveronese@...il.com>
Subject: Re: [RFC PATCH net-next v3 01/13] net: phy: Introduce ethernet link
 topology representation

Hi Simon,

On Sat, 9 Dec 2023 17:02:41 +0000
Simon Horman <horms@...nel.org> wrote:

> On Fri, Dec 01, 2023 at 05:36:51PM +0100, Maxime Chevallier wrote:
> > Link topologies containing multiple network PHYs attached to the same
> > net_device can be found when using a PHY as a media converter for use
> > with an SFP connector, on which an SFP transceiver containing a PHY can
> > be used.
> > 
> > With the current model, the transceiver's PHY can't be used for
> > operations such as cable testing, timestamping, macsec offload, etc.
> > 
> > The reason being that most of the logic for these configuration, coming
> > from either ethtool netlink or ioctls tend to use netdev->phydev, which
> > in multi-phy systems will reference the PHY closest to the MAC.
> > 
> > Introduce a numbering scheme allowing to enumerate PHY devices that
> > belong to any netdev, which can in turn allow userspace to take more
> > precise decisions with regard to each PHY's configuration.
> > 
> > The numbering is maintained per-netdev, in a phy_device_list.
> > The numbering works similarly to a netdevice's ifindex, with
> > identifiers that are only recycled once INT_MAX has been reached.
> > 
> > This prevents races that could occur between PHY listing and SFP
> > transceiver removal/insertion.
> > 
> > The identifiers are assigned at phy_attach time, as the numbering
> > depends on the netdevice the phy is attached to.
> > 
> > Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>  
> 
> Hi Maxime,
> 
> some minor feedback from my side.
> 
> ...
> 
> > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> > index f65e85c91fc1..3cf7774df57e 100644
> > --- a/drivers/net/phy/Makefile
> > +++ b/drivers/net/phy/Makefile
> > @@ -2,7 +2,7 @@
> >  # Makefile for Linux PHY drivers
> >  
> >  libphy-y			:= phy.o phy-c45.o phy-core.o phy_device.o \
> > -				   linkmode.o
> > +				   linkmode.o phy_link_topology.o
> >  mdio-bus-y			+= mdio_bus.o mdio_device.o
> >  
> >  ifdef CONFIG_MDIO_DEVICE
> > diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c  
> 
> ...
> 
> > @@ -265,6 +266,14 @@ static void phy_mdio_device_remove(struct mdio_device *mdiodev)
> >  
> >  static struct phy_driver genphy_driver;
> >  
> > +static struct phy_link_topology *phy_get_link_topology(struct phy_device *phydev)
> > +{
> > +	if (phydev->attached_dev)
> > +		return &phydev->attached_dev->link_topo;
> > +
> > +	return NULL;
> > +}
> > +  
> 
> This function is declared static but is unused, which causes
> allmodconfig W=1 builds to fail. Perhaps it could be introduced
> in a latter patch where it is used?

Ah true, thanks for spotting this !

> ...
> 
> > diff --git a/drivers/net/phy/phy_link_topology.c b/drivers/net/phy/phy_link_topology.c  
> 
> ...
> 
> > +void phy_link_topo_init(struct phy_link_topology *topo)
> > +{
> > +	xa_init_flags(&topo->phys, XA_FLAGS_ALLOC1);
> > +	topo->next_phy_index = 1;
> > +}  
> 
> ...
> 
> > diff --git a/include/linux/phy_link_topology.h b/include/linux/phy_link_topology.h  
> 
> ...
> 
> > +#else
> > +static struct phy_device *phy_link_topo_get_phy(struct phy_link_topology *topo,
> > +						u32 phyindex)
> > +{
> > +	return NULL;
> > +}
> > +
> > +static int phy_link_topo_add_phy(struct phy_link_topology *topo,
> > +				 struct phy_device *phy,
> > +				 enum phy_upstream upt, void *upstream)
> > +{
> > +	return 0;
> > +}
> > +
> > +static void phy_link_topo_del_phy(struct phy_link_topology *topo,
> > +				  struct phy_device *phy)
> > +{
> > +}
> > +#endif  
> 
> nit: functions in .h should be declared static inline

Will do in next version

> ...
> 
> > diff --git a/net/core/dev.c b/net/core/dev.c  
> 
> ...
> 
> > @@ -10832,6 +10833,8 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
> >  #ifdef CONFIG_NET_SCHED
> >  	hash_init(dev->qdisc_hash);
> >  #endif
> > +	phy_link_topo_init(&dev->link_topo);
> > +  
> 
> I don't think this can work unless PHYLIB is compiled as a built-in.

Inded, I need to better clarify and document the dependency with
PHYLIB.

Thanks a lot for the review,

Maxime