[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231211094938.11c3322b80c2b827b46725c5@hugovil.com>
Date: Mon, 11 Dec 2023 09:49:38 -0500
From: Hugo Villeneuve <hugo@...ovil.com>
To: Lino Sanfilippo <l.sanfilippo@...bus.com>
Cc: gregkh@...uxfoundation.org, jirislaby@...nel.org,
ilpo.jarvinen@...ux.intel.com, u.kleine-koenig@...gutronix.de,
shawnguo@...nel.org, s.hauer@...gutronix.de,
mcoquelin.stm32@...il.com, alexandre.torgue@...s.st.com,
cniedermaier@...electronics.com, linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org, LinoSanfilippo@....de,
lukas@...ner.de, p.rosenberger@...bus.com, stable@...r.kernel.org
Subject: Re: [PATCH v5 1/7] serial: Do not hold the port lock when setting
rx-during-tx GPIO
On Sat, 9 Dec 2023 13:58:30 +0100
Lino Sanfilippo <l.sanfilippo@...bus.com> wrote:
> Both the imx and stm32 driver set the rx-during-tx GPIO in rs485_config().
> Since this function is called with the port lock held, this can be an
> problem in case that setting the GPIO line can sleep (e.g. if a GPIO
> expander is used which is connected via SPI or I2C).
>
> Avoid this issue by moving the GPIO setting outside of the port lock into
> the serial core and thus making it a generic feature.
>
> Fixes: c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO")
> Fixes: ca530cfa968c ("serial: imx: Add support for RS485 RX_DURING_TX output GPIO")
> Cc: Shawn Guo <shawnguo@...nel.org>
> Cc: Sascha Hauer <s.hauer@...gutronix.de>
> Cc: stable@...r.kernel.org
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@...bus.com>
> ---
> drivers/tty/serial/imx.c | 4 ----
> drivers/tty/serial/serial_core.c | 12 ++++++++++++
> drivers/tty/serial/stm32-usart.c | 5 +----
> 3 files changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 708b9852a575..9cffeb23112b 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -1943,10 +1943,6 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio
> rs485conf->flags & SER_RS485_RX_DURING_TX)
> imx_uart_start_rx(port);
>
> - if (port->rs485_rx_during_tx_gpio)
> - gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio,
> - !!(rs485conf->flags & SER_RS485_RX_DURING_TX));
> -
> return 0;
> }
>
> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> index f1348a509552..a0290a5fe8b3 100644
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -1402,6 +1402,16 @@ static void uart_set_rs485_termination(struct uart_port *port,
> !!(rs485->flags & SER_RS485_TERMINATE_BUS));
> }
>
> +static void uart_set_rs485_rx_during_tx(struct uart_port *port,
> + const struct serial_rs485 *rs485)
> +{
> + if (!(rs485->flags & SER_RS485_ENABLED))
> + return;
> +
> + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio,
> + !!(rs485->flags & SER_RS485_RX_DURING_TX));
> +}
> +
> static int uart_rs485_config(struct uart_port *port)
> {
> struct serial_rs485 *rs485 = &port->rs485;
> @@ -1413,6 +1423,7 @@ static int uart_rs485_config(struct uart_port *port)
>
> uart_sanitize_serial_rs485(port, rs485);
> uart_set_rs485_termination(port, rs485);
> + uart_set_rs485_rx_during_tx(port, rs485);
>
> uart_port_lock_irqsave(port, &flags);
> ret = port->rs485_config(port, NULL, rs485);
> @@ -1457,6 +1468,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
> return ret;
> uart_sanitize_serial_rs485(port, &rs485);
> uart_set_rs485_termination(port, &rs485);
> + uart_set_rs485_rx_during_tx(port, &rs485);
>
> uart_port_lock_irqsave(port, &flags);
> ret = port->rs485_config(port, &tty->termios, &rs485);
> diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
> index 3048620315d6..ec9a72a5bea9 100644
> --- a/drivers/tty/serial/stm32-usart.c
> +++ b/drivers/tty/serial/stm32-usart.c
> @@ -226,10 +226,7 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter
>
> stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
>
> - if (port->rs485_rx_during_tx_gpio)
> - gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio,
> - !!(rs485conf->flags & SER_RS485_RX_DURING_TX));
> - else
> + if (!port->rs485_rx_during_tx_gpio)
> rs485conf->flags |= SER_RS485_RX_DURING_TX;
>
> if (rs485conf->flags & SER_RS485_ENABLED) {
> --
> 2.42.0
>
Reviewed-by: Hugo Villeneuve <hvilleneuve@...onoff.com>
Hugo
Powered by blists - more mailing lists