[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c1bc144d-07d6-422c-8294-42be47f83e59@linaro.org>
Date: Wed, 13 Dec 2023 09:05:54 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Chunfeng Yun <chunfeng.yun@...iatek.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Mathias Nyman <mathias.nyman@...el.com>,
linux-usb@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Macpaul Lin <macpaul.lin@...iatek.com>,
Eddie Hung <eddie.hung@...iatek.com>
Subject: Re: [PATCH 1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1
isoc-in transfer issue
On 13/12/2023 07:35, Chunfeng Yun wrote:
> For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it
> still send out unexpected ACK after receiving a short packet in burst
> transfer, this will cause an exception on connected device, specially for
> a 4k camera.
> Add a quirk property "mediatek,rxfifo-depth" to work around this hardware
> issue;
> The side-effect is that may cause performance drop about 10%, including
> bulk transfer.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
> ---
> .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> index e9644e333d78..b8ed68574ba4 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> @@ -124,6 +124,16 @@ properties:
> defined in the xHCI spec on MTK's controller.
> default: 5000
>
> + mediatek,rxfifo-depth:
> + description:
The property description and driver patch suggest you configure the
depth of FIFO, so this should be not bool, but some uint32. And then,
use generic "fifo-depth" property to set desired depth.
Best regards,
Krzysztof
Powered by blists - more mailing lists