[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231213094722.31547-1-mike.looijmans@topic.nl>
Date: Wed, 13 Dec 2023 10:47:21 +0100
From: Mike Looijmans <mike.looijmans@...ic.nl>
To: devicetree@...r.kernel.org, linux-iio@...r.kernel.org
CC: Mike Looijmans <mike.looijmans@...ic.nl>,
Conor Dooley <conor+dt@...nel.org>,
Jonathan Cameron <jic23@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>, linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] dt-bindings: iio: adc: ti-ads1298: Add driver
Skeleton driver for the TI ADS1298 medical ADC. This device is
typically used for ECG and similar measurements. Supports data
acquisition at configurable scale and sampling frequency.
Signed-off-by: Mike Looijmans <mike.looijmans@...ic.nl>
---
.../bindings/iio/adc/ti,ads1298.yaml | 80 +++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
new file mode 100644
index 000000000000..7a160ba721eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ads1298 medical ADC chips
+
+maintainers:
+ - Mike Looijmans <mike.looijmans@...ic.nl>
+
+properties:
+ compatible:
+ enum:
+ - ti,ads1298
+
+ reg:
+ maxItems: 1
+
+ spi-cpha: true
+
+ reset-gpios:
+ maxItems: 1
+
+ avdd-supply:
+ description:
+ Analog power supply, voltage between AVDD and AVSS. When providing a
+ symmetric +/- 2.5V, the regulator should report 5V.
+
+ vref-supply:
+ description:
+ Optional reference voltage. If omitted, internal reference is used,
+ depending on analog supply this is 2.4 or 4V.
+
+ clocks:
+ description: Optional 2.048 MHz external source clock on CLK pin
+ maxItems: 1
+
+ clock-names:
+ const: clk
+
+ interrupts:
+ description: Interrupt on DRDY pin, triggers on falling edge
+ maxItems: 1
+
+ label: true
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - interrupts
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@1 {
+ reg = <1>;
+ compatible = "ti,ads1298";
+ label = "ads1298-1-ecg";
+ avdd-supply = <®_iso_5v_a>;
+ clock-names = "clk";
+ clocks = <&clk_ads1298>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <78 IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <20000000>;
+ spi-cpha;
+ };
+ };
+...
--
2.34.1
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijmans@...ic.nl
W: www.topic.nl
Please consider the environment before printing this e-mail
Powered by blists - more mailing lists