[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231213130023.606486-1-manikanta.guntupalli@amd.com>
Date: Wed, 13 Dec 2023 18:30:20 +0530
From: Manikanta Guntupalli <manikanta.guntupalli@....com>
To: <git@....com>, <michal.simek@....com>,
<gregkh@...uxfoundation.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<linux-serial@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <jirislaby@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>
CC: <radhey.shyam.pandey@....com>, <srinivas.goud@....com>,
<shubhrajyoti.datta@....com>, <manion05gk@...il.com>,
Manikanta Guntupalli <manikanta.guntupalli@....com>
Subject: [PATCH V5 0/3] Add rs485 support to uartps driver
Add reference to rs485.yaml.
Add rs485 support to uartps driver.
---
Changes for V2:
Modify optional gpio name to xlnx,phy-ctrl-gpios.
Update commit description.
Add support for RTS, delay_rts_before_send and delay_rts_after_send in RS485 mode.
Changes for V3:
Modify optional gpio name to rts-gpios.
Update commit description.
Move cdns_uart_tx_empty function to avoid prototype statement.
Remove assignment of struct serial_rs485 to port->rs485 as
serial core performs that.
Switch to native RTS in non GPIO case.
Handle rs485 during stop tx.
Remove explicit calls to configure gpio direction and value,
as devm_gpiod_get_optional performs that by using GPIOD_OUT_LOW argument.
Update implementation to support configuration of GPIO/RTS value
based on user configuration of SER_RS485_RTS_ON_SEND and
SER_RS485_RTS_AFTER_SEND. Move implementation to start_tx from handle_tx.
Changes for V4:
Update rts-gpios description.
Create separate patch for cdns_uart_tx_empty relocation.
Call cdns_rs485_rx_setup() before uart_add_one_port() in probe.
Update gpio descriptor name to gpiod_rts.
Instead of cdns_rs485_config_gpio_rts_high() and
cdns_rs485_config_gpio_rts_low() functions for RTS/GPIO value
configuration implement cdns_rts_gpio_enable().
Disable auto rts and call cdns_uart_stop_tx() from cdns_rs485_config.
Use timer instead of mdelay for delay_rts_before_send and delay_rts_after_send.
Update cdns_uart_set_mctrl to support GPIO/RTS.
Changes for V5:
Remove rts-gpios description.
Update commit message and description.
Manikanta Guntupalli (3):
dt-bindings: Add reference to rs485.yaml
tty: serial: uartps: Relocate cdns_uart_tx_empty to facilitate rs485
tty: serial: uartps: Add rs485 support to uartps driver
.../devicetree/bindings/serial/cdns,uart.yaml | 1 +
drivers/tty/serial/xilinx_uartps.c | 244 ++++++++++++++++--
2 files changed, 221 insertions(+), 24 deletions(-)
--
2.25.1
Powered by blists - more mailing lists