| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPY8ntBQ+qY9441-rMzq_JAoYAaY_r+E-ADv7Wry0tJNTzKpwg@mail.gmail.com>
Date: Thu, 14 Dec 2023 15:10:43 +0000
From: Dave Stevenson <dave.stevenson@...pberrypi.com>
To: Maxime Ripard <mripard@...nel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>, Emma Anholt <emma@...olt.net>,
Jonathan Corbet <corbet@....net>,
Sandy Huang <hjc@...k-chips.com>,
Heiko Stübner <heiko@...ech.de>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, Hans Verkuil <hverkuil@...all.nl>,
linux-rockchip@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-media@...r.kernel.org
Subject: Re: [PATCH v5 15/44] drm/connector: hdmi: Compute bpc and format automatically
Hi Maxime
On Thu, 7 Dec 2023 at 15:50, Maxime Ripard <mripard@...nel.org> wrote:
>
> Now that we have all the infrastructure needed, we can add some code
> that will, for a given connector state and mode, compute the best output
> format and bpc.
>
> The algorithm is the same one than the one already found in i915 and
> vc4.
We seem to have some extra words in this sentence.
"The algorithm is the same as that already found in i915 and vc4."?
Possibly "equivalent to" instead of "the same as", as i915 is slightly
different.
> Signed-off-by: Maxime Ripard <mripard@...nel.org>
> ---
> drivers/gpu/drm/drm_atomic_state_helper.c | 183 ++++++-
> .../gpu/drm/tests/drm_atomic_state_helper_test.c | 529 ++++++++++++++++++++-
> drivers/gpu/drm/tests/drm_kunit_edid.h | 160 +++++++
> 3 files changed, 860 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index a36edda590f8..2442b5a2d94f 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -682,6 +682,96 @@ static bool hdmi_is_full_range(const struct drm_connector *connector,
> return drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL ? true : false;
> }
>
> +static bool
> +sink_supports_format_bpc(const struct drm_connector *connector,
> + const struct drm_display_info *info,
> + const struct drm_display_mode *mode,
> + unsigned int format, unsigned int bpc)
> +{
> + struct drm_device *dev = connector->dev;
> + u8 vic = drm_match_cea_mode(mode);
> +
> + if (vic == 1 && bpc != 8) {
> + drm_dbg(dev, "VIC1 requires a bpc of 8, got %u\n", bpc);
> + return false;
> + }
> +
> + if (!info->is_hdmi &&
> + (format != HDMI_COLORSPACE_RGB || bpc != 8)) {
> + drm_dbg(dev, "DVI Monitors require an RGB output at 8 bpc\n");
> + return false;
> + }
> +
> + if (!(connector->hdmi.supported_formats & BIT(format))) {
> + drm_dbg(dev, "%s format unsupported by the connector.\n",
> + drm_hdmi_connector_get_output_format_name(format));
> + return false;
> + }
> +
> + switch (format) {
> + case HDMI_COLORSPACE_RGB:
> + drm_dbg(dev, "RGB Format, checking the constraints.\n");
> +
> + if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444))
> + return false;
We've dropped this check from vc4 in our downstream kernel as it stops
you using the prebaked EDIDs (eg drm.edid_firmware=edid/1024x768.bin),
or any other EDID that is defined as an analog monitor.
The EDID parsing bombs out at [1], so info->color_formats gets left at 0.
RGB is mandatory for both DVI and HDMI, so rejecting it seems overly fussy.
I don't see i915 making use of info->color_formats at all. The
equivalent function looks to be intel_hdmi_sink_bpc_possible [2] which
just accepts anything for 8bpc output.
Dave
PS I'll have to defer looking at patch 16 for another day - it just
needs a bit more analysis than I can fit in today.
[1] https://elixir.free-electrons.com/linux/latest/source/drivers/gpu/drm/drm_edid.c#L6533
[2] https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/i915/display/intel_hdmi.c#L1909
> +
> + if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) {
> + drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
> + return false;
> + }
> +
> + if (bpc == 12 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36)) {
> + drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
> + return false;
> + }
> +
> + drm_dbg(dev, "RGB format supported in that configuration.\n");
> +
> + return true;
> +
> + case HDMI_COLORSPACE_YUV422:
> + drm_dbg(dev, "YUV422 format, checking the constraints.\n");
> +
> + if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR422)) {
> + drm_dbg(dev, "Sink doesn't support YUV422.\n");
> + return false;
> + }
> +
> + if (bpc != 12) {
> + drm_dbg(dev, "YUV422 only supports 12 bpc.\n");
> + return false;
> + }
> +
> + drm_dbg(dev, "YUV422 format supported in that configuration.\n");
> +
> + return true;
> +
> + case HDMI_COLORSPACE_YUV444:
> + drm_dbg(dev, "YUV444 format, checking the constraints.\n");
> +
> + if (!(info->color_formats & DRM_COLOR_FORMAT_YCBCR444)) {
> + drm_dbg(dev, "Sink doesn't support YUV444.\n");
> + return false;
> + }
> +
> + if (bpc == 10 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_30)) {
> + drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n");
> + return false;
> + }
> +
> + if (bpc == 12 && !(info->edid_hdmi_ycbcr444_dc_modes & DRM_EDID_HDMI_DC_36)) {
> + drm_dbg(dev, "12 BPC but sink doesn't support Deep Color 36.\n");
> + return false;
> + }
> +
> + drm_dbg(dev, "YUV444 format supported in that configuration.\n");
> +
> + return true;
> + }
> +
> + return false;
> +}
> +
> static enum drm_mode_status
> hdmi_clock_valid(const struct drm_connector *connector,
> const struct drm_display_mode *mode,
> @@ -726,6 +816,95 @@ hdmi_compute_clock(const struct drm_connector *connector,
> return 0;
> }
>
> +static bool
> +hdmi_try_format_bpc(const struct drm_connector *connector,
> + struct drm_connector_state *state,
> + const struct drm_display_mode *mode,
> + unsigned int bpc, enum hdmi_colorspace fmt)
> +{
> + const struct drm_display_info *info = &connector->display_info;
> + struct drm_device *dev = connector->dev;
> + int ret;
> +
> + drm_dbg(dev, "Trying %s output format\n",
> + drm_hdmi_connector_get_output_format_name(fmt));
> +
> + if (!sink_supports_format_bpc(connector, info, mode, fmt, bpc)) {
> + drm_dbg(dev, "%s output format not supported with %u bpc\n",
> + drm_hdmi_connector_get_output_format_name(fmt), bpc);
> + return false;
> + }
> +
> + ret = hdmi_compute_clock(connector, state, mode, bpc, fmt);
> + if (ret) {
> + drm_dbg(dev, "Couldn't compute clock for %s output format and %u bpc\n",
> + drm_hdmi_connector_get_output_format_name(fmt), bpc);
> + return false;
> + }
> +
> + drm_dbg(dev, "%s output format supported with %u (TMDS char rate: %llu Hz)\n",
> + drm_hdmi_connector_get_output_format_name(fmt), bpc, state->hdmi.tmds_char_rate);
> +
> + return true;
> +}
> +
> +static int
> +hdmi_compute_format(const struct drm_connector *connector,
> + struct drm_connector_state *state,
> + const struct drm_display_mode *mode,
> + unsigned int bpc)
> +{
> + struct drm_device *dev = connector->dev;
> +
> + if (hdmi_try_format_bpc(connector, state, mode, bpc, HDMI_COLORSPACE_RGB)) {
> + state->hdmi.output_format = HDMI_COLORSPACE_RGB;
> + return 0;
> + }
> +
> + if (hdmi_try_format_bpc(connector, state, mode, bpc, HDMI_COLORSPACE_YUV422)) {
> + state->hdmi.output_format = HDMI_COLORSPACE_YUV422;
> + return 0;
> + }
> +
> + drm_dbg(dev, "Failed. No Format Supported for that bpc count.\n");
> +
> + return -EINVAL;
> +}
> +
> +static int
> +hdmi_compute_config(const struct drm_connector *connector,
> + struct drm_connector_state *state,
> + const struct drm_display_mode *mode)
> +{
> + struct drm_device *dev = connector->dev;
> + unsigned int max_bpc = clamp_t(unsigned int,
> + state->max_bpc,
> + 8, connector->max_bpc);
> + unsigned int bpc;
> + int ret;
> +
> + for (bpc = max_bpc; bpc >= 8; bpc -= 2) {
> + drm_dbg(dev, "Trying with a %d bpc output\n", bpc);
> +
> + ret = hdmi_compute_format(connector, state, mode, bpc);
> + if (ret)
> + continue;
> +
> + state->hdmi.output_bpc = bpc;
> +
> + drm_dbg(dev,
> + "Mode %ux%u @ %uHz: Found configuration: bpc: %u, fmt: %s, clock: %llu\n",
> + mode->hdisplay, mode->vdisplay, drm_mode_vrefresh(mode),
> + state->hdmi.output_bpc,
> + drm_hdmi_connector_get_output_format_name(state->hdmi.output_format),
> + state->hdmi.tmds_char_rate);
> +
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> /**
> * drm_atomic_helper_connector_hdmi_check() - Helper to check HDMI connector atomic state
> * @connector: DRM Connector
> @@ -751,9 +930,7 @@ int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector,
>
> new_state->hdmi.is_full_range = hdmi_is_full_range(connector, new_state);
>
> - ret = hdmi_compute_clock(connector, new_state, mode,
> - new_state->hdmi.output_bpc,
> - new_state->hdmi.output_format);
> + ret = hdmi_compute_config(connector, new_state, mode);
> if (ret)
> return ret;
>
> diff --git a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
> index e7dbdd4a4e7f..860e34b00fee 100644
> --- a/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
> +++ b/drivers/gpu/drm/tests/drm_atomic_state_helper_test.c
> @@ -70,9 +70,6 @@ static int light_up_connector(struct kunit *test,
> conn_state = drm_atomic_get_connector_state(state, connector);
> KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
>
> - conn_state->hdmi.output_bpc = connector->max_bpc;
> - conn_state->hdmi.output_format = HDMI_COLORSPACE_RGB;
> -
> ret = drm_atomic_set_crtc_for_connector(conn_state, crtc);
> KUNIT_EXPECT_EQ(test, ret, 0);
>
> @@ -720,10 +717,15 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test)
> 10);
> KUNIT_ASSERT_NOT_NULL(test, priv);
>
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
> + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
>
> - conn = &priv->connector;
> preferred = find_preferred_mode(conn);
> KUNIT_ASSERT_NOT_NULL(test, preferred);
>
> @@ -741,11 +743,11 @@ static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test)
> old_conn_state = drm_atomic_get_old_connector_state(state, conn);
> KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
>
> - new_conn_state->hdmi.output_bpc = 8;
> + new_conn_state->max_requested_bpc = 8;
>
> KUNIT_ASSERT_NE(test,
> - old_conn_state->hdmi.output_bpc,
> - new_conn_state->hdmi.output_bpc);
> + old_conn_state->max_requested_bpc,
> + new_conn_state->max_requested_bpc);
>
> ret = drm_atomic_check_only(state);
> KUNIT_ASSERT_EQ(test, ret, 0);
> @@ -789,10 +791,15 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
> 10);
> KUNIT_ASSERT_NOT_NULL(test, priv);
>
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
> + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
>
> - conn = &priv->connector;
> preferred = find_preferred_mode(conn);
> KUNIT_ASSERT_NOT_NULL(test, preferred);
>
> @@ -832,6 +839,56 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
> KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
> }
>
> +/*
> + * Test that if we have an HDMI connector but a !HDMI display, we always
> + * output RGB with 8 bpc.
> + */
> +static void drm_test_check_output_bpc_dvi(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_display_info *info;
> + struct drm_display_mode *preferred;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test,
> + BIT(HDMI_COLORSPACE_RGB) |
> + BIT(HDMI_COLORSPACE_YUV422) |
> + BIT(HDMI_COLORSPACE_YUV444),
> + 12);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_dvi_1080p,
> + ARRAY_SIZE(test_edid_dvi_1080p));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + info = &conn->display_info;
> + KUNIT_ASSERT_FALSE(test, info->is_hdmi);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + conn_state = conn->state;
> + KUNIT_ASSERT_NOT_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
> +}
> +
> /*
> * Test that when doing a commit which would use RGB 8bpc, the TMDS
> * clock rate stored in the connector state is equal to the mode clock
> @@ -1024,6 +1081,452 @@ static void drm_test_check_hdmi_funcs_reject_rate(struct kunit *test)
> KUNIT_EXPECT_LT(test, ret, 0);
> }
>
> +/*
> + * Test that if:
> + * - We have an HDMI connector supporting RGB only
> + * - The chosen mode has a TMDS character rate higher than the display
> + * supports in RGB/12bpc
> + * - The chosen mode has a TMDS character rate lower than the display
> + * supports in RGB/10bpc.
> + *
> + * Then we will pick the latter, and the computed TMDS character rate
> + * will be equal to 1.25 times the mode pixel clock.
> + */
> +static void drm_test_check_max_tmds_rate_bpc_fallback(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_display_info *info;
> + struct drm_display_mode *preferred;
> + unsigned long long rate;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test,
> + BIT(HDMI_COLORSPACE_RGB),
> + 12);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
> + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + info = &conn->display_info;
> + KUNIT_ASSERT_TRUE(test, info->is_hdmi);
> + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> + KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
> +
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
> + KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
> +
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 10, HDMI_COLORSPACE_RGB);
> + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_EXPECT_EQ(test, ret, 0);
> +
> + conn_state = conn->state;
> + KUNIT_ASSERT_NOT_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1250);
> +}
> +
> +/*
> + * Test that if:
> + * - We have an HDMI connector supporting both RGB and YUV422 and up to
> + * 12 bpc
> + * - The chosen mode has a TMDS character rate higher than the display
> + * supports in RGB/12bpc
> + * - The chosen mode has a TMDS character rate lower than the display
> + * supports in YUV422/12bpc.
> + *
> + * Then we will pick the latter, and the computed TMDS character rate
> + * will be equal to the mode pixel clock.
> + */
> +static void drm_test_check_max_tmds_rate_format_fallback(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_display_info *info;
> + struct drm_display_mode *preferred;
> + unsigned long long rate;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test,
> + BIT(HDMI_COLORSPACE_RGB) |
> + BIT(HDMI_COLORSPACE_YUV422) |
> + BIT(HDMI_COLORSPACE_YUV444),
> + 12);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
> + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + info = &conn->display_info;
> + KUNIT_ASSERT_TRUE(test, info->is_hdmi);
> + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> + KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
> +
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
> + KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
> +
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
> + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_EXPECT_EQ(test, ret, 0);
> +
> + conn_state = conn->state;
> + KUNIT_ASSERT_NOT_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 12);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_YUV422);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1000);
> +}
> +
> +/*
> + * Test that if a driver and screen supports RGB and YUV formats, and we
> + * try to set the VIC 1 mode, we end up with 8bpc RGB even if we could
> + * have had a higher bpc.
> + */
> +static void drm_test_check_output_bpc_format_vic_1(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_display_info *info;
> + struct drm_display_mode *mode;
> + unsigned long long rate;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test,
> + BIT(HDMI_COLORSPACE_RGB) |
> + BIT(HDMI_COLORSPACE_YUV422) |
> + BIT(HDMI_COLORSPACE_YUV444),
> + 12);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
> + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + info = &conn->display_info;
> + KUNIT_ASSERT_TRUE(test, info->is_hdmi);
> + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + mode = drm_display_mode_from_cea_vic(drm, 1);
> + KUNIT_ASSERT_NOT_NULL(test, mode);
> +
> + /*
> + * NOTE: We can't use drm_connector_hdmi_compute_mode_clock()
> + * here because we're trying to get the rate of an invalid
> + * configuration.
> + *
> + * Thus, we have to calculate the rate by hand.
> + */
> + rate = mode->clock * 1500;
> + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
> + KUNIT_EXPECT_EQ(test, ret, 0);
> +
> + conn_state = conn->state;
> + KUNIT_ASSERT_NOT_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
> +}
> +
> +/*
> + * Test that if a driver supports only RGB but the screen also supports
> + * YUV formats, we only end up with an RGB format.
> + */
> +static void drm_test_check_output_bpc_format_driver_rgb_only(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_display_info *info;
> + struct drm_display_mode *preferred;
> + unsigned long long rate;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test,
> + BIT(HDMI_COLORSPACE_RGB),
> + 12);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
> + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + info = &conn->display_info;
> + KUNIT_ASSERT_TRUE(test, info->is_hdmi);
> + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> +
> + /*
> + * We're making sure that YUV422 would be the preferred option
> + * here: we're always favouring higher bpc, we can't have RGB
> + * because the TMDS character rate exceeds the maximum supported
> + * by the display, and YUV422 works for that display.
> + *
> + * But since the driver only supports RGB, we should fallback to
> + * a lower bpc with RGB.
> + */
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
> + KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
> +
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
> + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_EXPECT_EQ(test, ret, 0);
> +
> + conn_state = conn->state;
> + KUNIT_ASSERT_NOT_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
> +}
> +
> +/*
> + * Test that if a screen supports only RGB but the driver also supports
> + * YUV formats, we only end up with an RGB format.
> + */
> +static void drm_test_check_output_bpc_format_display_rgb_only(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_display_info *info;
> + struct drm_display_mode *preferred;
> + unsigned long long rate;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test,
> + BIT(HDMI_COLORSPACE_RGB) |
> + BIT(HDMI_COLORSPACE_YUV422) |
> + BIT(HDMI_COLORSPACE_YUV444),
> + 12);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_hdmi_1080p_rgb_max_200mhz,
> + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_200mhz));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + info = &conn->display_info;
> + KUNIT_ASSERT_TRUE(test, info->is_hdmi);
> + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> +
> + /*
> + * We're making sure that YUV422 would be the preferred option
> + * here: we're always favouring higher bpc, we can't have RGB
> + * because the TMDS character rate exceeds the maximum supported
> + * by the display, and YUV422 works for that display.
> + *
> + * But since the display only supports RGB, we should fallback to
> + * a lower bpc with RGB.
> + */
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
> + KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
> +
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
> + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_EXPECT_EQ(test, ret, 0);
> +
> + conn_state = conn->state;
> + KUNIT_ASSERT_NOT_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
> +}
> +
> +/*
> + * Test that if a display supports higher bpc but the driver only
> + * supports 8 bpc, we only end up with 8 bpc even if we could have had a
> + * higher bpc.
> + */
> +static void drm_test_check_output_bpc_format_driver_8bpc_only(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_display_info *info;
> + struct drm_display_mode *preferred;
> + unsigned long long rate;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test,
> + BIT(HDMI_COLORSPACE_RGB),
> + 8);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz,
> + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + info = &conn->display_info;
> + KUNIT_ASSERT_TRUE(test, info->is_hdmi);
> + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> +
> + /*
> + * We're making sure that we have headroom on the TMDS character
> + * clock to actually use 12bpc.
> + */
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
> + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_EXPECT_EQ(test, ret, 0);
> +
> + conn_state = conn->state;
> + KUNIT_ASSERT_NOT_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
> +}
> +
> +/*
> + * Test that if a driver supports higher bpc but the display only
> + * supports 8 bpc, we only end up with 8 bpc even if we could have had a
> + * higher bpc.
> + */
> +static void drm_test_check_output_bpc_format_display_8bpc_only(struct kunit *test)
> +{
> + struct drm_atomic_helper_connector_hdmi_priv *priv;
> + struct drm_modeset_acquire_ctx *ctx;
> + struct drm_connector_state *conn_state;
> + struct drm_display_info *info;
> + struct drm_display_mode *preferred;
> + unsigned long long rate;
> + struct drm_connector *conn;
> + struct drm_device *drm;
> + struct drm_crtc *crtc;
> + int ret;
> +
> + priv = drm_atomic_helper_connector_hdmi_init(test,
> + BIT(HDMI_COLORSPACE_RGB) |
> + BIT(HDMI_COLORSPACE_YUV422) |
> + BIT(HDMI_COLORSPACE_YUV444),
> + 12);
> + KUNIT_ASSERT_NOT_NULL(test, priv);
> +
> + conn = &priv->connector;
> + ret = set_connector_edid(test, conn,
> + test_edid_hdmi_1080p_rgb_max_340mhz,
> + ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_340mhz));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> + info = &conn->display_info;
> + KUNIT_ASSERT_TRUE(test, info->is_hdmi);
> + KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
> +
> + ctx = drm_kunit_helper_acquire_ctx_alloc(test);
> + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
> +
> + preferred = find_preferred_mode(conn);
> + KUNIT_ASSERT_NOT_NULL(test, preferred);
> +
> + /*
> + * We're making sure that we have headroom on the TMDS character
> + * clock to actually use 12bpc.
> + */
> + rate = drm_connector_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
> + KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
> +
> + drm = &priv->drm;
> + crtc = priv->crtc;
> + ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
> + KUNIT_EXPECT_EQ(test, ret, 0);
> +
> + conn_state = conn->state;
> + KUNIT_ASSERT_NOT_NULL(test, conn_state);
> +
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
> +}
> +
> static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
> KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
> KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
> @@ -1034,8 +1537,16 @@ static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
> KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
> KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
> KUNIT_CASE(drm_test_check_hdmi_funcs_reject_rate),
> + KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback),
> + KUNIT_CASE(drm_test_check_max_tmds_rate_format_fallback),
> KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
> KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
> + KUNIT_CASE(drm_test_check_output_bpc_dvi),
> + KUNIT_CASE(drm_test_check_output_bpc_format_vic_1),
> + KUNIT_CASE(drm_test_check_output_bpc_format_display_8bpc_only),
> + KUNIT_CASE(drm_test_check_output_bpc_format_display_rgb_only),
> + KUNIT_CASE(drm_test_check_output_bpc_format_driver_8bpc_only),
> + KUNIT_CASE(drm_test_check_output_bpc_format_driver_rgb_only),
> KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_8bpc),
> KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_10bpc),
> KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_12bpc),
> @@ -1167,7 +1678,7 @@ static void drm_test_check_format_value(struct kunit *test)
>
> conn = &priv->connector;
> conn_state = conn->state;
> - KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
> + KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, 0);
> }
>
> /*
> diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.h b/drivers/gpu/drm/tests/drm_kunit_edid.h
> index 24f3377ef0f0..3e3527c58c31 100644
> --- a/drivers/gpu/drm/tests/drm_kunit_edid.h
> +++ b/drivers/gpu/drm/tests/drm_kunit_edid.h
> @@ -1,6 +1,64 @@
> #ifndef DRM_KUNIT_EDID_H_
> #define DRM_KUNIT_EDID_H_
>
> +/*
> + * edid-decode (hex):
> + *
> + * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
> + * 00 21 01 03 81 a0 5a 78 0a 00 00 00 00 00 00 00
> + * 00 00 00 00 00 00 01 01 01 01 01 01 01 01 01 01
> + * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
> + * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
> + * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
> + * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
> + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ab
> + *
> + * ----------------
> + *
> + * Block 0, Base EDID:
> + * EDID Structure Version & Revision: 1.3
> + * Vendor & Product Identification:
> + * Manufacturer: LNX
> + * Model: 42
> + * Made in: 2023
> + * Basic Display Parameters & Features:
> + * Digital display
> + * DFP 1.x compatible TMDS
> + * Maximum image size: 160 cm x 90 cm
> + * Gamma: 2.20
> + * RGB color display
> + * First detailed timing is the preferred timing
> + * Color Characteristics:
> + * Red : 0.0000, 0.0000
> + * Green: 0.0000, 0.0000
> + * Blue : 0.0000, 0.0000
> + * White: 0.0000, 0.0000
> + * Established Timings I & II: none
> + * Standard Timings: none
> + * Detailed Timing Descriptors:
> + * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm)
> + * Hfront 88 Hsync 44 Hback 148 Hpol P
> + * Vfront 4 Vsync 5 Vback 36 Vpol P
> + * Display Product Name: 'Test EDID'
> + * Display Range Limits:
> + * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
> + * Dummy Descriptor:
> + * Checksum: 0xab
> + */
> +const unsigned char test_edid_dvi_1080p[] = {
> + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
> + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
> + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
> + 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
> + 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
> + 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
> + 0x46, 0x1e, 0x46, 0x0f, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
> + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xab
> +};
> +
> /*
> * edid-decode (hex):
> *
> @@ -103,6 +161,108 @@ const unsigned char test_edid_hdmi_1080p_rgb_max_200mhz[] = {
> 0x00, 0x00, 0x00, 0xd0
> };
>
> +/*
> + * edid-decode (hex):
> + *
> + * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
> + * 00 21 01 03 81 a0 5a 78 02 00 00 00 00 00 00 00
> + * 00 00 00 20 00 00 01 01 01 01 01 01 01 01 01 01
> + * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
> + * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
> + * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
> + * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
> + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 92
> + *
> + * 02 03 1b 81 e3 05 00 20 41 10 e2 00 4a 6d 03 0c
> + * 00 12 34 00 28 20 00 00 00 00 00 00 00 00 00 00
> + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> + * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0
> + *
> + * ----------------
> + *
> + * Block 0, Base EDID:
> + * EDID Structure Version & Revision: 1.3
> + * Vendor & Product Identification:
> + * Manufacturer: LNX
> + * Model: 42
> + * Made in: 2023
> + * Basic Display Parameters & Features:
> + * Digital display
> + * DFP 1.x compatible TMDS
> + * Maximum image size: 160 cm x 90 cm
> + * Gamma: 2.20
> + * Monochrome or grayscale display
> + * First detailed timing is the preferred timing
> + * Color Characteristics:
> + * Red : 0.0000, 0.0000
> + * Green: 0.0000, 0.0000
> + * Blue : 0.0000, 0.0000
> + * White: 0.0000, 0.0000
> + * Established Timings I & II:
> + * DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
> + * Standard Timings: none
> + * Detailed Timing Descriptors:
> + * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm)
> + * Hfront 88 Hsync 44 Hback 148 Hpol P
> + * Vfront 4 Vsync 5 Vback 36 Vpol P
> + * Display Product Name: 'Test EDID'
> + * Display Range Limits:
> + * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
> + * Dummy Descriptor:
> + * Extension blocks: 1
> + * Checksum: 0x92
> + *
> + * ----------------
> + *
> + * Block 1, CTA-861 Extension Block:
> + * Revision: 3
> + * Underscans IT Video Formats by default
> + * Native detailed modes: 1
> + * Colorimetry Data Block:
> + * sRGB
> + * Video Data Block:
> + * VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz
> + * Video Capability Data Block:
> + * YCbCr quantization: No Data
> + * RGB quantization: Selectable (via AVI Q)
> + * PT scan behavior: No Data
> + * IT scan behavior: Always Underscanned
> + * CE scan behavior: Always Underscanned
> + * Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
> + * Source physical address: 1.2.3.4
> + * Maximum TMDS clock: 340 MHz
> + * Extended HDMI video details:
> + * Checksum: 0xd0 Unused space in Extension Block: 100 bytes
> + */
> +const unsigned char test_edid_hdmi_1080p_rgb_max_340mhz[] = {
> + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
> + 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
> + 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
> + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
> + 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
> + 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
> + 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
> + 0x46, 0x00, 0x00, 0xc4, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
> + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x41, 0x02, 0x03, 0x1b, 0x81,
> + 0xe3, 0x05, 0x00, 0x20, 0x41, 0x10, 0xe2, 0x00, 0x4a, 0x6d, 0x03, 0x0c,
> + 0x00, 0x12, 0x34, 0x00, 0x44, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0xd0
> +};
> +
> /*
> * edid-decode (hex):
> *
>
> --
> 2.43.0
>
Powered by blists - more mailing lists