| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231215-x1e80100-dts-missing-nodes-v3-1-c4e8d186adf2@linaro.org>
Date: Fri, 15 Dec 2023 00:48:12 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Andy Gross <agross@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Abel Vesa <abel.vesa@...aro.org>,
Rajendra Nayak <quic_rjendra@...cinc.com>
Subject: [PATCH v3 1/2] arm64: dts: qcom: x1e80100: Add more support
Add nodes for the following:
- ADSP and CDSP
- IPCC
- USB SubSys 0, 1 and 2 (along with the PHYs)
- PCIe 4 and 6 and related PHYs
- DISP, GPU, TCSR and CAM clock controllers
- AOSS QMP
- Display controllers (along with the PHYs)
Co-developed-by: Rajendra Nayak <quic_rjendra@...cinc.com>
Signed-off-by: Rajendra Nayak <quic_rjendra@...cinc.com>
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1323 +++++++++++++++++++++++++++++++-
1 file changed, 1318 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index da691e2f3209..3cbac48614c9 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -4,11 +4,16 @@
*/
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/clock/qcom,x1e80100-gpucc.h>
+#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -662,6 +667,58 @@ smem_mem: smem@...00000 {
};
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <443>, <429>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <94>, <432>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
compatible = "simple-bus";
@@ -677,13 +734,13 @@ gcc: clock-controller@...000 {
clocks = <&bi_tcxo_div2>,
<&sleep_clk>,
<0>,
+ <&pcie4_phy>,
<0>,
+ <&pcie6a_phy>,
<0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>;
+ <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+ <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+ <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
power-domains = <&rpmhpd RPMHPD_CX>;
#clock-cells = <1>;
@@ -691,6 +748,17 @@ gcc: clock-controller@...000 {
#power-domain-cells = <1>;
};
+ ipcc: mailbox@...000 {
+ compatible = "qcom,x1e80100-ipcc", "qcom,ipcc";
+ reg = <0 0x00408000 0 0x1000>;
+
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ #mbox-cells = <2>;
+ };
+
gpi_dma2: dma-controller@...000 {
compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
reg = <0 0x00800000 0 0x60000>;
@@ -2428,6 +2496,114 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
};
};
+ usb_1_ss0_hsphy: phy@...000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x00fd3000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss0_qmpphy: phy@...000 {
+ compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+ reg = <0 0x00fd5000 0 0x4000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+ power-domains = <&gcc GCC_USB_1_PHY_GDSC>;
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB4_0_DP0_PHY_PRIM_BCR>;
+ reset-names = "phy", "common";
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss1_hsphy: phy@...000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x00fd9000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss1_qmpphy: phy@...000 {
+ compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+ reg = <0 0x00fda000 0 0x4000>;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+ power-domains = <&gcc GCC_USB30_SEC_GDSC>;
+
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB4_1_DP0_PHY_SEC_BCR>;
+ reset-names = "phy", "common";
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss2_hsphy: phy@...000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x00fde000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_TERT_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss2_qmpphy: phy@...000 {
+ compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+ reg = <0 0x00fdf000 0 0x4000>;
+
+ clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+ power-domains = <&gcc GCC_USB30_TERT_GDSC>;
+
+ resets = <&gcc GCC_USB3_PHY_TERT_BCR>,
+ <&gcc GCC_USB4_2_DP0_PHY_TERT_BCR>;
+ reset-names = "phy", "common";
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ status = "disabled";
+ };
+
cnoc_main: interconnect@...0000 {
compatible = "qcom,x1e80100-cnoc-main";
reg = <0 0x1500000 0 0x14400>;
@@ -2536,12 +2712,237 @@ mmss_noc: interconnect@...0000 {
#interconnect-cells = <2>;
};
+ pcie6a: pci@...8000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-x1e80100";
+ reg = <0 0x01bf8000 0 0x3000>,
+ <0 0x70000000 0 0xf1d>,
+ <0 0x70000f20 0 0xa8>,
+ <0 0x70001000 0 0x1000>,
+ <0 0x70100000 0 0x100000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
+ <0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>;
+ bus-range = <0 0xff>;
+
+ dma-coherent;
+
+ linux,pci-domain = <7>;
+ num-lanes = <2>;
+
+ interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE_6A_AUX_CLK>,
+ <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_6A_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_6A_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_6A_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "noc_aggr_south_sf";
+
+ assigned-clocks = <&gcc GCC_PCIE_6A_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ interconnects = <&pcie_south_anoc MASTER_PCIE_6A 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_6A 0>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+
+ resets = <&gcc GCC_PCIE_6A_BCR>,
+ <&gcc GCC_PCIE_6A_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
+
+ power-domains = <&gcc GCC_PCIE_6A_GDSC>;
+
+ phys = <&pcie6a_phy>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie6a_phy: phy@...c000 {
+ compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy";
+ reg = <0 0x01bfc000 0 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_6A_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ resets = <&gcc GCC_PCIE_6A_PHY_BCR>,
+ <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>;
+ reset-names = "phy",
+ "phy_nocsr";
+
+ assigned-clocks = <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie6a_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ pcie4: pci@...8000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-x1e80100";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x7c000000 0 0xf1d>,
+ <0 0x7c000f40 0 0xa8>,
+ <0 0x7c001000 0 0x1000>,
+ <0 0x7c100000 0 0x100000>,
+ <0 0x01c0b000 0 0x1000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config",
+ "mhi";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>,
+ <0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>;
+ bus-range = <0x00 0xff>;
+
+ dma-coherent;
+
+ linux,pci-domain = <5>;
+ num-lanes = <2>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+ <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "noc_aggr_south_sf";
+
+ assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ interconnects = <&pcie_south_anoc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+
+ resets = <&gcc GCC_PCIE_4_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc GCC_PCIE_4_GDSC>;
+
+ phys = <&pcie4_phy>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie4_phy: phy@...e000 {
+ compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy";
+ reg = <0 0x01c0e000 0 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+ <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_4_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ resets = <&gcc GCC_PCIE_4_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ power-domains = <&gcc GCC_PCIE_4_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie4_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
tcsr_mutex: hwlock@...0000 {
compatible = "qcom,tcsr-mutex";
reg = <0 0x01f40000 0 0x20000>;
#hwlock-cells = <1>;
};
+ tcsr: clock-controller@...0000 {
+ compatible = "qcom,x1e80100-tcsr", "syscon";
+ reg = <0 0x01fc0000 0 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ gpucc: clock-controller@...0000 {
+ compatible = "qcom,x1e80100-gpucc";
+ reg = <0 0x03d90000 0 0xa000>;
+ clocks = <&bi_tcxo_div2>,
+ <&gcc GCC_GPU_GPLL0_CPH_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CPH_CLK_SRC>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
gem_noc: interconnect@...00000 {
compatible = "qcom,x1e80100-gem-noc";
reg = <0 0x26400000 0 0x311200>;
@@ -2587,6 +2988,821 @@ lpass_lpicx_noc: interconnect@...0000 {
#interconnect-cells = <2>;
};
+ usb_2_hsphy: phy@...0000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e0000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_USB20_HS_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss2: usb@...8800 {
+ compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+ reg = <0 0x0a0f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>,
+ <&gcc GCC_USB30_TERT_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>,
+ <&gcc GCC_USB30_TERT_SLEEP_CLK>,
+ <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_TERT_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 10 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 57 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_TERT_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_TERT_BCR>;
+
+ interconnects = <&usb_south_anoc MASTER_USB3_2 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_2 0>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_1_ss2_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a000000 0 0xcd00>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x14a0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,usb3_lpm_capable;
+ phys = <&usb_1_ss2_hsphy>, <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+
+ port {
+ usb_1_ss2_role_switch: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_2: usb@...8800 {
+ compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+ reg = <0 0x0a2f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 50 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 49 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq";
+
+ power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+ interconnects = <&usb_north_anoc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_2_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a200000 0 0xcd00>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x14e0 0x0>;
+ phys = <&usb_2_hsphy>;
+ phy-names = "usb2-phy";
+
+ port {
+ usb_2_role_switch: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_1_ss0: usb@...8800 {
+ compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_NORTH_AHB_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 61 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "pwr_event",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_1_ss0_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x1420 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,usb3_lpm_capable;
+ phys = <&usb_1_ss0_hsphy>, <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+
+ port {
+ usb_1_ss0_role_switch: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_1_ss1: usb@...8800 {
+ compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+ reg = <0 0x0a8f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 47 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 11 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 60 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "pwr_event",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_SEC_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+
+ interconnects = <&usb_south_anoc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_1_ss1_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a800000 0 0xcd00>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x1460 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,usb3_lpm_capable;
+ phys = <&usb_1_ss1_hsphy>, <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+
+ port {
+ usb_1_ss1_role_switch: endpoint {
+ };
+ };
+ };
+ };
+
+ camcc: clock-controller@...0000 {
+ compatible = "qcom,x1e80100-camcc";
+ reg = <0 0x0ade0000 0 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ status = "disabled";
+ };
+
+ mdss: display-subsystem@...0000 {
+ compatible = "qcom,x1e80100-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK_SRC>;
+ assigned-clock-parents = <&dispcc DISP_CC_PLL0>;
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+ <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem";
+
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@...1000 {
+ compatible = "qcom,x1e80100-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ mdss_intf4_out: endpoint {
+ remote-endpoint = <&mdss_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+
+ mdss_intf5_out: endpoint {
+ remote-endpoint = <&mdss_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+
+ mdss_intf6_out: endpoint {
+ remote-endpoint = <&mdss_dp2_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dp0: displayport-controller@...0000 {
+ compatible = "qcom,x1e80100-dp";
+ reg = <0 0xae90000 0 0x200>,
+ <0 0xae90200 0 0x200>,
+ <0 0xae90400 0 0x600>,
+ <0 0xae91000 0 0x400>,
+ <0 0xae91400 0 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ operating-points-v2 = <&mdss_dp0_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp0_in: endpoint {
+ remote-endpoint = <&mdss_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp0_out: endpoint {
+ };
+ };
+ };
+
+ mdss_dp0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dp1: displayport-controller@...8000 {
+ compatible = "qcom,x1e80100-dp";
+ reg = <0 0xae98000 0 0x200>,
+ <0 0xae98200 0 0x200>,
+ <0 0xae98400 0 0x600>,
+ <0 0xae99000 0 0x400>,
+ <0 0xae99400 0 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <13>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ phys = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&mdss_dp1_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp1_in: endpoint {
+ remote-endpoint = <&mdss_intf4_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp1_out: endpoint {
+ };
+ };
+ };
+
+ mdss_dp1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dp2: displayport-controller@...a000 {
+ compatible = "qcom,x1e80100-dp";
+ reg = <0 0xae9a000 0 0x200>,
+ <0 0xae9a200 0 0x200>,
+ <0 0xae9a400 0 0x600>,
+ <0 0xae9b000 0 0x400>,
+ <0 0xae9b400 0 0x400>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <14>;
+ phys = <&mdss_dp2_phy>;
+ phy-names = "dp";
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dp2_phy 0>, <&mdss_dp2_phy 1>;
+ operating-points-v2 = <&mdss_dp2_opp_table>;
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dp2_in: endpoint {
+ remote-endpoint = <&mdss_intf6_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss_dp2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dp3: displayport-controller@...0000 {
+ compatible = "qcom,x1e80100-dp", "qcom,sm8350-dp";
+ reg = <0 0xaea0000 0 0x200>,
+ <0 0xaea0200 0 0x200>,
+ <0 0xaea0400 0 0x600>,
+ <0 0xaea1000 0 0x400>,
+ <0 0xaea1400 0 0x400>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <15>;
+ phys = <&mdss_dp3_phy>;
+ phy-names = "dp";
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dp3_phy 0>, <&mdss_dp3_phy 1>;
+ operating-points-v2 = <&mdss_dp3_opp_table>;
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp3_in: endpoint {
+ remote-endpoint = <&mdss_intf5_out>;
+
+ link-frequencies = /bits/ 64 <8100000000>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+
+ mdss_dp3_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ };
+
+ mdss_dp2_phy: phy@...2a00 {
+ compatible = "qcom,x1e80100-dp-phy";
+ reg = <0 0x0aec2a00 0 0x19c>,
+ <0 0x0aec2200 0 0xec>,
+ <0 0x0aec2600 0 0xec>,
+ <0 0x0aec2000 0 0x1c8>;
+
+ clocks = <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux",
+ "cfg_ahb";
+
+ power-domains = <&rpmhpd RPMHPD_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss_dp3_phy: phy@...5a00 {
+ compatible = "qcom,x1e80100-dp-phy";
+ reg = <0 0x0aec5a00 0 0x19c>,
+ <0 0x0aec5200 0 0xec>,
+ <0 0x0aec5600 0 0xec>,
+ <0 0x0aec5000 0 0x1c8>;
+
+ clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>;
+ clock-names = "aux",
+ "cfg_ahb";
+
+ power-domains = <&rpmhpd RPMHPD_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ dispcc: clock-controller@...0000 {
+ compatible = "qcom,x1e80100-dispcc";
+ reg = <0 0x0af00000 0 0x20000>;
+ clocks = <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&sleep_clk>,
+ <0>, /* dsi0 */
+ <0>,
+ <0>, /* dsi1 */
+ <0>,
+ <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */
+ <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, /* dp0 */
+ <0>, /* dp1 */
+ <0>,
+ <0>, /* dp2 */
+ <0>,
+ <&mdss_dp3_phy 0>, /* dp3 */
+ <&mdss_dp3_phy 1>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@...0000 {
compatible = "qcom,x1e80100-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
@@ -2599,6 +3815,18 @@ pdc: interrupt-controller@...0000 {
interrupt-controller;
};
+ aoss_qmp: power-management@...0000 {
+ compatible = "qcom,x1e80100-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0 0x0c300000 0 0x400>;
+ interrupt-parent = <&ipcc>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ };
+
+
tlmm: pinctrl@...0000 {
compatible = "qcom,x1e80100-tlmm";
reg = <0 0x0f100000 0 0xf00000>;
@@ -3514,6 +4742,91 @@ system-cache-controller@...00000 {
"llcc_broadcast_base";
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ remoteproc_adsp: remoteproc@...00000 {
+ compatible = "qcom,x1e80100-adsp-pas";
+ reg = <0 0x30000000 0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
+
+ remoteproc_cdsp: remoteproc@...00000 {
+ compatible = "qcom,x1e80100-cdsp-pas";
+ reg = <0 0x32300000 0 0x1400000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+ };
+ };
};
timer {
--
2.34.1
Powered by blists - more mailing lists