linux-kernel - [PATCH v3 2/5] net: mdio: ipq4019: enable the SoC uniphy clocks for ipq5332 platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231214090304.16884-3-quic_luoj@quicinc.com>
Date:   Thu, 14 Dec 2023 17:03:01 +0800
From:   Luo Jie <quic_luoj@...cinc.com>
To:     <agross@...nel.org>, <andersson@...nel.org>,
        <konrad.dybcio@...aro.org>, <davem@...emloft.net>,
        <edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
        <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <conor+dt@...nel.org>, <andrew@...n.ch>, <hkallweit1@...il.com>,
        <linux@...linux.org.uk>, <robert.marko@...tura.hr>
CC:     <linux-arm-msm@...r.kernel.org>, <netdev@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <quic_srichara@...cinc.com>
Subject: [PATCH v3 2/5] net: mdio: ipq4019: enable the SoC uniphy clocks for ipq5332 platform

On the platform ipq5332, the related SoC uniphy GCC clocks need
to be enabled for making the MDIO slave devices accessible.

These UNIPHY clocks are from the SoC platform GCC clock provider,
which are enabled for the connected PHY devices working.

Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
---
 drivers/net/mdio/mdio-ipq4019.c | 75 ++++++++++++++++++++++++++++-----
 1 file changed, 64 insertions(+), 11 deletions(-)

diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c
index 5273864fabb3..e24b0e688b10 100644
--- a/drivers/net/mdio/mdio-ipq4019.c
+++ b/drivers/net/mdio/mdio-ipq4019.c
@@ -35,15 +35,36 @@
 /* MDIO clock source frequency is fixed to 100M */
 #define IPQ_MDIO_CLK_RATE	100000000
 
+/* SoC UNIPHY fixed clock */
+#define IPQ_UNIPHY_AHB_CLK_RATE	100000000
+#define IPQ_UNIPHY_SYS_CLK_RATE	24000000
+
 #define IPQ_PHY_SET_DELAY_US	100000
 
 /* Maximum SOC PCS(uniphy) number on IPQ platform */
 #define ETH_LDO_RDY_CNT				3
 
+enum mdio_clk_id {
+	MDIO_CLK_MDIO_AHB,
+	MDIO_CLK_UNIPHY0_AHB,
+	MDIO_CLK_UNIPHY0_SYS,
+	MDIO_CLK_UNIPHY1_AHB,
+	MDIO_CLK_UNIPHY1_SYS,
+	MDIO_CLK_CNT
+};
+
 struct ipq4019_mdio_data {
 	void __iomem *membase;
 	void __iomem *eth_ldo_rdy[ETH_LDO_RDY_CNT];
-	struct clk *mdio_clk;
+	struct clk *clk[MDIO_CLK_CNT];
+};
+
+static const char *const mdio_clk_name[] = {
+	"gcc_mdio_ahb_clk",
+	"uniphy0_ahb",
+	"uniphy0_sys",
+	"uniphy1_ahb",
+	"uniphy1_sys"
 };
 
 static int ipq4019_mdio_wait_busy(struct mii_bus *bus)
@@ -209,14 +230,43 @@ static int ipq4019_mdio_write_c22(struct mii_bus *bus, int mii_id, int regnum,
 static int ipq_mdio_reset(struct mii_bus *bus)
 {
 	struct ipq4019_mdio_data *priv = bus->priv;
-	int ret;
+	unsigned long rate;
+	int ret, index;
 
-	/* Configure MDIO clock source frequency if clock is specified in the device tree */
-	ret = clk_set_rate(priv->mdio_clk, IPQ_MDIO_CLK_RATE);
-	if (ret)
-		return ret;
+	/* For the platform ipq5332, there are two SoC uniphies available
+	 * for connecting with ethernet PHY, the SoC uniphy gcc clock
+	 * should be enabled for resetting the connected device such
+	 * as qca8386 switch, qca8081 PHY or other PHYs effectively.
+	 *
+	 * Configure MDIO/UNIPHY clock source frequency if clock instance
+	 * is specified in the device tree.
+	 */
+	for (index = MDIO_CLK_MDIO_AHB; index < MDIO_CLK_CNT; index++) {
+		switch (index) {
+		case MDIO_CLK_MDIO_AHB:
+			rate = IPQ_MDIO_CLK_RATE;
+			break;
+		case MDIO_CLK_UNIPHY0_AHB:
+		case MDIO_CLK_UNIPHY1_AHB:
+			rate = IPQ_UNIPHY_AHB_CLK_RATE;
+			break;
+		case MDIO_CLK_UNIPHY0_SYS:
+		case MDIO_CLK_UNIPHY1_SYS:
+			rate = IPQ_UNIPHY_SYS_CLK_RATE;
+			break;
+		default:
+			break;
+		}
+
+		ret = clk_set_rate(priv->clk[index], rate);
+		if (ret)
+			return ret;
+
+		ret = clk_prepare_enable(priv->clk[index]);
+		if (ret)
+			return ret;
+	}
 
-	ret = clk_prepare_enable(priv->mdio_clk);
 	if (ret == 0)
 		mdelay(10);
 
@@ -240,10 +290,6 @@ static int ipq4019_mdio_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->membase))
 		return PTR_ERR(priv->membase);
 
-	priv->mdio_clk = devm_clk_get_optional(&pdev->dev, "gcc_mdio_ahb_clk");
-	if (IS_ERR(priv->mdio_clk))
-		return PTR_ERR(priv->mdio_clk);
-
 	/* These platform resources are provided on the chipset IPQ5018 or
 	 * IPQ5332.
 	 */
@@ -271,6 +317,13 @@ static int ipq4019_mdio_probe(struct platform_device *pdev)
 		}
 	}
 
+	for (index = 0; index < MDIO_CLK_CNT; index++) {
+		priv->clk[index] = devm_clk_get_optional(&pdev->dev,
+							 mdio_clk_name[index]);
+		if (IS_ERR(priv->clk[index]))
+			return PTR_ERR(priv->clk[index]);
+	}
+
 	bus->name = "ipq4019_mdio";
 	bus->read = ipq4019_mdio_read_c22;
 	bus->write = ipq4019_mdio_write_c22;
-- 
2.42.0