| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231214114600.2451162-14-claudiu.beznea.uj@bp.renesas.com>
Date: Thu, 14 Dec 2023 13:45:52 +0200
From: Claudiu <claudiu.beznea@...on.dev>
To: s.shtylyov@....ru, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, richardcochran@...il.com,
p.zabel@...gutronix.de, yoshihiro.shimoda.uh@...esas.com,
wsa+renesas@...g-engineering.com, geert+renesas@...der.be
Cc: netdev@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH net-next v2 13/21] net: ravb: Set config mode in ndo_open and reset mode in ndo_close
From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
As some IP variants switch to reset mode (and thus registers' content is
lost) when setting clocks (due to module standby functionality) to be able
to implement runtime PM and save more power, set the IP's operation mode to
reset at the end of the probe. Along with it, in the ndo_open API the IP
will be switched to configuration, then operational mode. In the ndo_close
API, the IP will be switched back to reset mode. This allows implementing
runtime PM and, along with it, save more power when the IP is not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
---
Changes in v2:
- none; this patch is new
drivers/net/ethernet/renesas/ravb_main.c | 91 ++++++++++++++----------
1 file changed, 54 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index db9222fc57c2..31a1f8a83652 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1738,6 +1738,30 @@ static inline int ravb_hook_irq(unsigned int irq, irq_handler_t handler,
return error;
}
+static int ravb_set_config_mode(struct net_device *ndev)
+{
+ struct ravb_private *priv = netdev_priv(ndev);
+ const struct ravb_hw_info *info = priv->info;
+ int error;
+
+ if (info->gptp) {
+ ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
+ /* Set CSEL value */
+ ravb_modify(ndev, CCC, CCC_CSEL, CCC_CSEL_HPB);
+ } else if (info->ccc_gac) {
+ ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG |
+ CCC_GAC | CCC_CSEL_HPB);
+ } else {
+ ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
+ }
+
+ error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_CONFIG);
+ if (error)
+ netdev_err(ndev, "failed to switch device to config mode\n");
+
+ return error;
+}
+
static int ravb_set_reset_mode(struct net_device *ndev)
{
int error;
@@ -1821,13 +1845,19 @@ static int ravb_open(struct net_device *ndev)
if (info->nc_queues)
napi_enable(&priv->napi[RAVB_NC]);
+ /* Set AVB config mode */
+ error = ravb_set_config_mode(ndev);
+ if (error)
+ goto out_napi_off;
+
ravb_set_delay_mode(ndev);
ravb_write(ndev, priv->desc_bat_dma, DBAT);
/* Device init */
error = ravb_dmac_init(ndev);
if (error)
- goto out_napi_off;
+ goto out_set_reset;
+
ravb_emac_init(ndev);
error = ravb_set_gti(ndev);
@@ -1853,6 +1883,8 @@ static int ravb_open(struct net_device *ndev)
ravb_ptp_stop(ndev);
out_dma_stop:
ravb_stop_dma(ndev);
+out_set_reset:
+ ravb_set_reset_mode(ndev);
out_napi_off:
if (info->nc_queues)
napi_disable(&priv->napi[RAVB_NC]);
@@ -2187,6 +2219,9 @@ static int ravb_close(struct net_device *ndev)
if (info->nc_queues)
ravb_ring_free(ndev, RAVB_NC);
+ /* Set reset mode. */
+ ravb_set_reset_mode(ndev);
+
return 0;
}
@@ -2517,30 +2552,6 @@ static const struct of_device_id ravb_match_table[] = {
};
MODULE_DEVICE_TABLE(of, ravb_match_table);
-static int ravb_set_config_mode(struct net_device *ndev)
-{
- struct ravb_private *priv = netdev_priv(ndev);
- const struct ravb_hw_info *info = priv->info;
- int error;
-
- if (info->gptp) {
- ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
- /* Set CSEL value */
- ravb_modify(ndev, CCC, CCC_CSEL, CCC_CSEL_HPB);
- } else if (info->ccc_gac) {
- ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG |
- CCC_GAC | CCC_CSEL_HPB);
- } else {
- ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
- }
-
- error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_CONFIG);
- if (error)
- netdev_err(ndev, "failed to switch device to config mode\n");
-
- return error;
-}
-
/* Set tx and rx clock internal delay modes */
static void ravb_parse_delay_mode(struct device_node *np, struct net_device *ndev)
{
@@ -2818,11 +2829,6 @@ static int ravb_probe(struct platform_device *pdev)
ndev->netdev_ops = &ravb_netdev_ops;
ndev->ethtool_ops = &ravb_ethtool_ops;
- /* Set AVB config mode */
- error = ravb_set_config_mode(ndev);
- if (error)
- goto out_rpm_put;
-
error = ravb_compute_gti(ndev);
if (error)
goto out_rpm_put;
@@ -2857,11 +2863,16 @@ static int ravb_probe(struct platform_device *pdev)
eth_hw_addr_random(ndev);
}
+ /* Set config mode as this is needed for PHY initialization. */
+ error = ravb_config(ndev);
+ if (error)
+ goto out_rpm_put;
+
/* MDIO bus init */
error = ravb_mdio_init(priv);
if (error) {
dev_err(&pdev->dev, "failed to initialize MDIO\n");
- goto out_dma_free;
+ goto out_reset_mode;
}
netif_napi_add(ndev, &priv->napi[RAVB_BE], ravb_poll);
@@ -2875,19 +2886,30 @@ static int ravb_probe(struct platform_device *pdev)
device_set_wakeup_capable(&pdev->dev, 1);
+ /* Reset MAC as the module will be runtime disabled at this moment.
+ * This saves power. MAC will be switched back to configuration mode
+ * in ravb_open().
+ */
+ error = ravb_set_reset_mode(ndev);
+ if (error)
+ goto out_netdev_unregister;
+
/* Print device information */
netdev_info(ndev, "Base address at %#x, %pM, IRQ %d.\n",
(u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
return 0;
+out_netdev_unregister:
+ unregister_netdev(ndev);
out_napi_del:
if (info->nc_queues)
netif_napi_del(&priv->napi[RAVB_NC]);
netif_napi_del(&priv->napi[RAVB_BE]);
ravb_mdio_release(priv);
-out_dma_free:
+out_reset_mode:
+ ravb_set_reset_mode(ndev);
dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
priv->desc_bat_dma);
out_rpm_put:
@@ -2907,7 +2929,6 @@ static void ravb_remove(struct platform_device *pdev)
struct net_device *ndev = platform_get_drvdata(pdev);
struct ravb_private *priv = netdev_priv(ndev);
const struct ravb_hw_info *info = priv->info;
- int error;
unregister_netdev(ndev);
if (info->nc_queues)
@@ -2919,10 +2940,6 @@ static void ravb_remove(struct platform_device *pdev)
dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
priv->desc_bat_dma);
- error = ravb_set_reset_mode(ndev);
- if (error)
- netdev_err(ndev, "Failed to reset ndev\n");
-
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
clk_unprepare(priv->refclk);
--
2.39.2
Powered by blists - more mailing lists