lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231215171237.1152563-10-maxime.chevallier@bootlin.com>
Date: Fri, 15 Dec 2023 18:12:31 +0100
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: davem@...emloft.net
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	thomas.petazzoni@...tlin.com,
	Andrew Lunn <andrew@...n.ch>,
	Jakub Kicinski <kuba@...nel.org>,
	Eric Dumazet <edumazet@...gle.com>,
	Paolo Abeni <pabeni@...hat.com>,
	Russell King <linux@...linux.org.uk>,
	linux-arm-kernel@...ts.infradead.org,
	Christophe Leroy <christophe.leroy@...roup.eu>,
	Herve Codina <herve.codina@...tlin.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Vladimir Oltean <vladimir.oltean@....com>,
	Köry Maincent <kory.maincent@...tlin.com>,
	Jesse Brandeburg <jesse.brandeburg@...el.com>,
	Jonathan Corbet <corbet@....net>,
	Marek Behún <kabel@...nel.org>,
	Piergiorgio Beruto <piergiorgio.beruto@...il.com>,
	Oleksij Rempel <o.rempel@...gutronix.de>,
	Nicolò Veronese <nicveronese@...il.com>
Subject: [PATCH net-next v4 09/13] net: ethtool: plca: Target the command to the requested PHY

PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.

Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
V4: No changes
V3: No changes
V2: New patch

 net/ethtool/plca.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c
index b1e2e3b5027f..2b3e419f4dc2 100644
--- a/net/ethtool/plca.c
+++ b/net/ethtool/plca.c
@@ -61,7 +61,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -80,7 +80,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_cfg, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_cfg));
 
-	ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg);
+	ret = ops->get_plca_cfg(req_base->phydev, &data->plca_cfg);
 	ethnl_ops_complete(dev);
 
 out:
@@ -141,7 +141,6 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = {
 static int
 ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	const struct ethtool_phy_ops *ops;
 	struct nlattr **tb = info->attrs;
 	struct phy_plca_cfg plca_cfg;
@@ -149,7 +148,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev)
+	if (!req_info->phydev)
 		return -EOPNOTSUPP;
 
 	ops = ethtool_phy_ops;
@@ -168,7 +167,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
 	if (!mod)
 		return 0;
 
-	ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack);
+	ret = ops->set_plca_cfg(req_info->phydev, &plca_cfg, info->extack);
 	return ret < 0 ? ret : 1;
 }
 
@@ -204,7 +203,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	int ret;
 
 	// check that the PHY device is available and connected
-	if (!dev->phydev) {
+	if (!req_base->phydev) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
@@ -223,7 +222,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
 	memset(&data->plca_st, 0xff,
 	       sizeof_field(struct plca_reply_data, plca_st));
 
-	ret = ops->get_plca_status(dev->phydev, &data->plca_st);
+	ret = ops->get_plca_status(req_base->phydev, &data->plca_st);
 	ethnl_ops_complete(dev);
 out:
 	return ret;
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ