[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <e2e9644e13a8c0bb6ab7a24011c98c784d3d9cb6.camel@mediatek.com>
Date: Fri, 15 Dec 2023 06:14:07 +0000
From: Chunfeng Yun (云春峰) <Chunfeng.Yun@...iatek.com>
To: "krzysztof.kozlowski@...aro.org" <krzysztof.kozlowski@...aro.org>,
"angelogioacchino.delregno@...labora.com"
<angelogioacchino.delregno@...labora.com>, "gregkh@...uxfoundation.org"
<gregkh@...uxfoundation.org>, "robh+dt@...nel.org" <robh+dt@...nel.org>
CC: "linux-mediatek@...ts.infradead.org" <linux-mediatek@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"mathias.nyman@...el.com" <mathias.nyman@...el.com>,
Eddie Hung (洪正鑫) <Eddie.Hung@...iatek.com>,
"conor+dt@...nel.org" <conor+dt@...nel.org>,
Macpaul Lin (林智斌) <Macpaul.Lin@...iatek.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>, "matthias.bgg@...il.com"
<matthias.bgg@...il.com>
Subject: Re: [PATCH 1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1
isoc-in transfer issue
On Wed, 2023-12-13 at 12:17 +0100, AngeloGioacchino Del Regno wrote:
> Il 13/12/23 09:05, Krzysztof Kozlowski ha scritto:
> > On 13/12/2023 07:35, Chunfeng Yun wrote:
> > > For Gen1 isoc-in endpoint on controller before about SSUSB IPM
> > > v1.6.0, it
> > > still send out unexpected ACK after receiving a short packet in
> > > burst
> > > transfer, this will cause an exception on connected device,
> > > specially for
> > > a 4k camera.
> > > Add a quirk property "mediatek,rxfifo-depth" to work around this
> > > hardware
> > > issue;
> > > The side-effect is that may cause performance drop about 10%,
> > > including
> > > bulk transfer.
> > >
> > > Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
> > > ---
> > > .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 10
> > > ++++++++++
> > > 1 file changed, 10 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-
> > > xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-
> > > xhci.yaml
> > > index e9644e333d78..b8ed68574ba4 100644
> > > --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-
> > > xhci.yaml
> > > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-
> > > xhci.yaml
> > > @@ -124,6 +124,16 @@ properties:
> > > defined in the xHCI spec on MTK's controller.
> > > default: 5000
> > >
> > > + mediatek,rxfifo-depth:
> > > + description:
> >
> > The property description and driver patch suggest you configure the
> > depth of FIFO, so this should be not bool, but some uint32. And
> > then,
> > use generic "fifo-depth" property to set desired depth.
>
> Did you mean "rx-fifo-depth" instead, as used in net?
> This FIFO depth parameter is for RX only.
Yes, only for RX
>
> Cheers,
> Angelo
>
>
Powered by blists - more mailing lists