| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231215080702.8089-1-zhifeng.tang@unisoc.com>
Date: Fri, 15 Dec 2023 16:07:02 +0800
From: Zhifeng Tang <zhifeng.tang@...soc.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd
<sboyd@...nel.org>, Orson Zhai <orsonzhai@...il.com>,
Baolin Wang
<baolin.wang@...ux.alibaba.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>
CC: <linux-clk@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Zhifeng Tang
<zhifeng.tang23@...il.com>,
Wenming Wu <wenming.wu@...soc.com>
Subject: [PATCH 2/4] clk: sprd: add reset controller driver for UMS512
In most of Unisoc SOCs, reset controller and clock provider are
combined together.This patch mainly add reset controller driver
for UMS512.
Signed-off-by: Zhifeng Tang <zhifeng.tang@...soc.com>
---
drivers/clk/sprd/Makefile | 1 +
drivers/clk/sprd/common.c | 1 +
drivers/clk/sprd/common.h | 2 +
drivers/clk/sprd/reset.c | 78 +++++++++++
drivers/clk/sprd/reset.h | 30 +++++
drivers/clk/sprd/ums512-clk.c | 240 ++++++++++++++++++++++++++++++++++
6 files changed, 352 insertions(+)
create mode 100644 drivers/clk/sprd/reset.c
create mode 100644 drivers/clk/sprd/reset.h
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index f25b2c3904fb..72f6ecf8291e 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -7,6 +7,7 @@ clk-sprd-y += mux.o
clk-sprd-y += div.o
clk-sprd-y += composite.o
clk-sprd-y += pll.o
+clk-sprd-y += reset.o
## SoC support
obj-$(CONFIG_SPRD_SC9860_CLK) += sc9860-clk.o
diff --git a/drivers/clk/sprd/common.c b/drivers/clk/sprd/common.c
index 762f0961f17f..4ddec6348447 100644
--- a/drivers/clk/sprd/common.c
+++ b/drivers/clk/sprd/common.c
@@ -75,6 +75,7 @@ int sprd_clk_regmap_init(struct platform_device *pdev,
}
sprd_clk_set_regmap(desc, regmap);
+ platform_set_drvdata(pdev, regmap);
return 0;
}
diff --git a/drivers/clk/sprd/common.h b/drivers/clk/sprd/common.h
index 1d077b39cef6..1ac39af68497 100644
--- a/drivers/clk/sprd/common.h
+++ b/drivers/clk/sprd/common.h
@@ -24,6 +24,8 @@ struct sprd_clk_desc {
struct sprd_clk_common **clk_clks;
unsigned long num_clk_clks;
struct clk_hw_onecell_data *hw_clks;
+ struct sprd_reset_map *resets;
+ unsigned long num_resets;
};
static inline struct sprd_clk_common *
diff --git a/drivers/clk/sprd/reset.c b/drivers/clk/sprd/reset.c
new file mode 100644
index 000000000000..92d19465b531
--- /dev/null
+++ b/drivers/clk/sprd/reset.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Spreadtrum reset clock driver
+//
+// Copyright (C) 2022 Spreadtrum, Inc.
+// Author: Zhifeng Tang <zhifeng.tang@...soc.com>
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include "reset.h"
+
+static inline struct sprd_reset *to_sprd_reset(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct sprd_reset, rcdev);
+}
+
+static int sprd_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sprd_reset *reset = to_sprd_reset(rcdev);
+ const struct sprd_reset_map *map = &reset->reset_map[id];
+ unsigned int offset = map->sc_offset;
+ unsigned long flags;
+ unsigned int val;
+
+ if (map->sc) {
+ regmap_write(reset->regmap, map->reg + offset, map->mask);
+ } else {
+ spin_lock_irqsave(&reset->lock, flags);
+ regmap_read(reset->regmap, map->reg, &val);
+ val |= map->mask;
+ regmap_write(reset->regmap, map->reg, val);
+ spin_unlock_irqrestore(&reset->lock, flags);
+ }
+
+ return 0;
+}
+
+static int sprd_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sprd_reset *reset = to_sprd_reset(rcdev);
+ const struct sprd_reset_map *map = &reset->reset_map[id];
+ unsigned int offset = map->sc_offset * 2;
+ unsigned long flags;
+ unsigned int val;
+
+ if (map->sc) {
+ regmap_write(reset->regmap, map->reg + offset, map->mask);
+ } else {
+ spin_lock_irqsave(&reset->lock, flags);
+ regmap_read(reset->regmap, map->reg, &val);
+ val &= ~map->mask;
+ regmap_write(reset->regmap, map->reg, val);
+ spin_unlock_irqrestore(&reset->lock, flags);
+ }
+
+ return 0;
+}
+
+static int sprd_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ sprd_reset_assert(rcdev, id);
+ udelay(1);
+ sprd_reset_deassert(rcdev, id);
+
+ return 0;
+}
+
+const struct reset_control_ops sprd_reset_ops = {
+ .assert = sprd_reset_assert,
+ .deassert = sprd_reset_deassert,
+ .reset = sprd_reset_reset,
+};
+EXPORT_SYMBOL_GPL(sprd_reset_ops);
diff --git a/drivers/clk/sprd/reset.h b/drivers/clk/sprd/reset.h
new file mode 100644
index 000000000000..155330b42775
--- /dev/null
+++ b/drivers/clk/sprd/reset.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+//
+// Spreadtrum reset clock driver
+//
+// Copyright (C) 2022 Spreadtrum, Inc.
+// Author: Zhifeng Tang <zhifeng.tang@...soc.com>
+
+#ifndef _SPRD_RESET_H_
+#define _SPRD_RESET_H_
+
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+struct sprd_reset_map {
+ u32 reg;
+ u32 mask;
+ bool sc;
+ u32 sc_offset;
+};
+
+struct sprd_reset {
+ struct reset_controller_dev rcdev;
+ const struct sprd_reset_map *reset_map;
+ struct regmap *regmap;
+ spinlock_t lock;
+};
+
+extern const struct reset_control_ops sprd_reset_ops;
+
+#endif /* _SPRD_RESET_H_ */
diff --git a/drivers/clk/sprd/ums512-clk.c b/drivers/clk/sprd/ums512-clk.c
index 9384ecc6c741..cebc83608f0a 100644
--- a/drivers/clk/sprd/ums512-clk.c
+++ b/drivers/clk/sprd/ums512-clk.c
@@ -15,6 +15,7 @@
#include <linux/slab.h>
#include <dt-bindings/clock/sprd,ums512-clk.h>
+#include <dt-bindings/reset/sprd,ums512-reset.h>
#include "common.h"
#include "composite.h"
@@ -22,6 +23,7 @@
#include "gate.h"
#include "mux.h"
#include "pll.h"
+#include "reset.h"
#define UMS512_MUX_FLAG \
(CLK_GET_RATE_NOCACHE | CLK_SET_RATE_NO_REPARENT)
@@ -105,10 +107,42 @@ static struct clk_hw_onecell_data ums512_pmu_gate_hws = {
.num = CLK_PMU_GATE_NUM,
};
+static struct sprd_reset_map ums512_pmu_apb_resets[] = {
+ [RESET_PMU_APB_WTLCP_SOFT_RST] = { 0x00b0, BIT(0), true, 0x1000 },
+ [RESET_PMU_APB_PUBCP_SOFT_RST] = { 0x00b0, BIT(1), true, 0x1000 },
+ [RESET_PMU_APB_WTLCP_DSP_SOFT_RST] = { 0x00b0, BIT(2), true, 0x1000 },
+ [RESET_PMU_APB_MM_SOFT_RST] = { 0x00b0, BIT(3), true, 0x1000 },
+ [RESET_PMU_APB_GPU_SOFT_RST] = { 0x00b0, BIT(4), true, 0x1000 },
+ [RESET_PMU_APB_AP_SOFT_RST] = { 0x00b0, BIT(5), true, 0x1000 },
+ [RESET_PMU_APB_PUB_SOFT_RST] = { 0x00b0, BIT(6), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_SOFT_RST] = { 0x00b0, BIT(7), true, 0x1000 },
+ [RESET_PMU_APB_SP_SYS_SOFT_RST] = { 0x00b0, BIT(8), true, 0x1000 },
+ [RESET_PMU_APB_AUDCP_SYS_SOFT_RST] = { 0x00b0, BIT(9), true, 0x1000 },
+ [RESET_PMU_APB_AUDCP_AUDDSP_SOFT_RST] = { 0x00b0, BIT(10), true, 0x1000 },
+ [RESET_PMU_APB_CDMA_SOFT_RST] = { 0x00b0, BIT(11), true, 0x1000 },
+ [RESET_PMU_APB_WTLCP_AON_SOFT_RST] = { 0x00b0, BIT(12), true, 0x1000 },
+ [RESET_PMU_APB_WCDMA_AON_SOFT_RST] = { 0x00b0, BIT(13), true, 0x1000 },
+ [RESET_PMU_APB_WTLCP_LDSP_SOFT_RST] = { 0x00b0, BIT(14), true, 0x1000 },
+ [RESET_PMU_APB_WTLCP_TGDSP_SOFT_RST] = { 0x00b0, BIT(15), true, 0x1000 },
+ [RESET_PMU_APB_AP_VSP_SOFT_RST] = { 0x00b0, BIT(16), true, 0x1000 },
+ [RESET_PMU_APB_AP_VDSP_SOFT_RST] = { 0x00b0, BIT(17), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_CORE0_MODE_ST_SOFT_RST] = { 0x00b0, BIT(18), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_CORE1_MODE_ST_SOFT_RST] = { 0x00b0, BIT(19), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_CORE2_MODE_ST_SOFT_RST] = { 0x00b0, BIT(20), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_CORE3_MODE_ST_SOFT_RST] = { 0x00b0, BIT(21), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_CORE4_MODE_ST_SOFT_RST] = { 0x00b0, BIT(22), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_CORE5_MODE_ST_SOFT_RST] = { 0x00b0, BIT(23), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_CORE6_MODE_ST_SOFT_RST] = { 0x00b0, BIT(24), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_CORE7_MODE_ST_SOFT_RST] = { 0x00b0, BIT(25), true, 0x1000 },
+ [RESET_PMU_APB_APCPU_CLUSTER_MODE_ST_SOFT_RST] = { 0x00b0, BIT(26), true, 0x1000 },
+};
+
static struct sprd_clk_desc ums512_pmu_gate_desc = {
.clk_clks = ums512_pmu_gate_clks,
.num_clk_clks = ARRAY_SIZE(ums512_pmu_gate_clks),
.hw_clks = &ums512_pmu_gate_hws,
+ .resets = ums512_pmu_apb_resets,
+ .num_resets = ARRAY_SIZE(ums512_pmu_apb_resets),
};
/* pll clock at g0 */
@@ -450,10 +484,30 @@ static struct clk_hw_onecell_data ums512_apahb_gate_hws = {
.num = CLK_AP_AHB_GATE_NUM,
};
+static struct sprd_reset_map ums512_ap_ahb_resets[] = {
+ [RESET_AP_AHB_DSI_SOFT_RST] = { 0x0004, BIT(0), true, 0x1000 },
+ [RESET_AP_AHB_DISPC_SOFT_RST] = { 0x0004, BIT(1), true, 0x1000 },
+ [RESET_AP_AHB_VDSP_IDMA_VAU_SOFT_RST] = { 0x0004, BIT(2), true, 0x1000 },
+ [RESET_AP_AHB_VDSP_MSTD_VAU_SOFT_RST] = { 0x0004, BIT(3), true, 0x1000 },
+ [RESET_AP_AHB_VDSP_MSTI_VAU_SOFT_RST] = { 0x0004, BIT(4), true, 0x1000 },
+ [RESET_AP_AHB_VDMA_VAU_SOFT_RST] = { 0x0004, BIT(5), true, 0x1000 },
+ [RESET_AP_AHB_IPI_SOFT_RST] = { 0x0004, BIT(6), true, 0x1000 },
+ [RESET_AP_AHB_VDMA_SOFT_RST] = { 0x0004, BIT(7), true, 0x1000 },
+ [RESET_AP_AHB_DMA_SOFT_RST] = { 0x0004, BIT(8), true, 0x1000 },
+ [RESET_AP_AHB_VDSP_SOFT_RST] = { 0x0004, BIT(9), true, 0x1000 },
+ [RESET_AP_AHB_VDSP_DEBUG_SOFT_RST] = { 0x0004, BIT(10), true, 0x1000 },
+ [RESET_AP_AHB_VSP_GLOBAL_SOFT_RST] = { 0x0004, BIT(11), true, 0x1000 },
+ [RESET_AP_AHB_VPP_SOFT_RST] = { 0x0004, BIT(12), true, 0x1000 },
+ [RESET_AP_AHB_VSP_SOFT_RST] = { 0x0004, BIT(13), true, 0x1000 },
+ [RESET_AP_AHB_DISPC_VAU_SOFT_RST] = { 0x0004, BIT(14), true, 0x1000 },
+};
+
static struct sprd_clk_desc ums512_apahb_gate_desc = {
.clk_clks = ums512_apahb_gate,
.num_clk_clks = ARRAY_SIZE(ums512_apahb_gate),
.hw_clks = &ums512_apahb_gate_hws,
+ .resets = ums512_ap_ahb_resets,
+ .num_resets = ARRAY_SIZE(ums512_ap_ahb_resets),
};
/* ap clks */
@@ -1542,10 +1596,82 @@ static struct clk_hw_onecell_data ums512_aon_gate_hws = {
.num = CLK_AON_APB_GATE_NUM,
};
+static struct sprd_reset_map ums512_aon_ahb_resets[] = {
+ [RESET_AON_APB_RC100M_CAL_SOFT_RST] = { 0x000c, BIT(0), true, 0x1000 },
+ [RESET_AON_APB_RFTI_SOFT_RST] = { 0x000c, BIT(1), true, 0x1000 },
+ [RESET_AON_APB_DCXO_LC_SOFT_RST] = { 0x000c, BIT(2), true, 0x1000 },
+ [RESET_AON_APB_BB_CAL_SOFT_RST] = { 0x000c, BIT(3), true, 0x1000 },
+ [RESET_AON_APB_MSPI0_SOFT_RST] = { 0x000c, BIT(4), true, 0x1000 },
+ [RESET_AON_APB_MSPI1_SOFT_RST] = { 0x000c, BIT(5), true, 0x1000 },
+ [RESET_AON_APB_DAP_MTX_SOFT_RST] = { 0x000c, BIT(6), true, 0x1000 },
+ [RESET_AON_APB_LVDSDIS_SOFT_RST] = { 0x000c, BIT(7), true, 0x1000 },
+ [RESET_AON_APB_SERDES_DPHY_SOFT_RST] = { 0x000c, BIT(8), true, 0x1000 },
+ [RESET_AON_APB_SERDES_DPHY_APB_SOFT_RST] = { 0x000c, BIT(9), true, 0x1000 },
+ [RESET_AON_APB_AP_EMMC_SOFT_RST] = { 0x000c, BIT(10), true, 0x1000 },
+ [RESET_AON_APB_AP_SDIO0_SOFT_RST] = { 0x000c, BIT(11), true, 0x1000 },
+ [RESET_AON_APB_AP_SDIO1_SOFT_RST] = { 0x000c, BIT(12), true, 0x1000 },
+ [RESET_AON_APB_AP_SDIO2_SOFT_RST] = { 0x000c, BIT(13), true, 0x1000 },
+ [RESET_AON_APB_PUBCP_SDIO0_SOFT_RST] = { 0x000c, BIT(14), true, 0x1000 },
+ [RESET_AON_APB_EFUSE_SOFT_RST] = { 0x0010, BIT(0), true, 0x1000 },
+ [RESET_AON_APB_GPIO_SOFT_RST] = { 0x0010, BIT(1), true, 0x1000 },
+ [RESET_AON_APB_MBOX_SOFT_RST] = { 0x0010, BIT(2), true, 0x1000 },
+ [RESET_AON_APB_KPD_SOFT_RST] = { 0x0010, BIT(3), true, 0x1000 },
+ [RESET_AON_APB_AON_SYST_SOFT_RST] = { 0x0010, BIT(4), true, 0x1000 },
+ [RESET_AON_APB_AP_SYST_SOFT_RST] = { 0x0010, BIT(5), true, 0x1000 },
+ [RESET_AON_APB_AON_TMR_SOFT_RST] = { 0x0010, BIT(6), true, 0x1000 },
+ [RESET_AON_APB_DVFS_TOP_SOFT_RST] = { 0x0010, BIT(7), true, 0x1000 },
+ [RESET_AON_APB_OTG_UTMI_SOFT_RST] = { 0x0010, BIT(8), true, 0x1000 },
+ [RESET_AON_APB_OTG_PHY_SOFT_RST] = { 0x0010, BIT(9), true, 0x1000 },
+ [RESET_AON_APB_SPLK_SOFT_RST] = { 0x0010, BIT(10), true, 0x1000 },
+ [RESET_AON_APB_PIN_SOFT_RST] = { 0x0010, BIT(11), true, 0x1000 },
+ [RESET_AON_APB_ANA_SOFT_RST] = { 0x0010, BIT(12), true, 0x1000 },
+ [RESET_AON_APB_CKG_SOFT_RST] = { 0x0010, BIT(13), true, 0x1000 },
+ [RESET_AON_APB_ETC_SOFT_RST] = { 0x0010, BIT(14), true, 0x1000 },
+ [RESET_AON_APB_APCPU_TS0_SOFT_RST] = { 0x0010, BIT(17), true, 0x1000 },
+ [RESET_AON_APB_APB_BUSMON_SOFT_RST] = { 0x0010, BIT(18), true, 0x1000 },
+ [RESET_AON_APB_AON_IIS_SOFT_RST] = { 0x0010, BIT(19), true, 0x1000 },
+ [RESET_AON_APB_SCC_SOFT_RST] = { 0x0010, BIT(20), true, 0x1000 },
+ [RESET_AON_APB_THM0_SOFT_RST] = { 0x0014, BIT(0), true, 0x1000 },
+ [RESET_AON_APB_THM1_SOFT_RST] = { 0x0014, BIT(1), true, 0x1000 },
+ [RESET_AON_APB_THM2_SOFT_RST] = { 0x0014, BIT(2), true, 0x1000 },
+ [RESET_AON_APB_AP_SIM_AON_TOP_SOFT_RST] = { 0x0014, BIT(3), true, 0x1000 },
+ [RESET_AON_APB_PUBCP_SIM0_AON_TOP_SOFT_RST] = { 0x0014, BIT(4), true, 0x1000 },
+ [RESET_AON_APB_PUBCP_SIM1_AON_TOP_SOFT_RST] = { 0x0014, BIT(5), true, 0x1000 },
+ [RESET_AON_APB_PUBCP_SIM2_AON_TOP_SOFT_RST] = { 0x0014, BIT(6), true, 0x1000 },
+ [RESET_AON_APB_I2C_SOFT_RST] = { 0x0014, BIT(7), true, 0x1000 },
+ [RESET_AON_APB_PMU_SOFT_RST] = { 0x0014, BIT(8), true, 0x1000 },
+ [RESET_AON_APB_ADI_SOFT_RST] = { 0x0014, BIT(9), true, 0x1000 },
+ [RESET_AON_APB_EIC_SOFT_RST] = { 0x0014, BIT(10), true, 0x1000 },
+ [RESET_AON_APB_AP_INTC0_SOFT_RST] = { 0x0014, BIT(11), true, 0x1000 },
+ [RESET_AON_APB_AP_INTC1_SOFT_RST] = { 0x0014, BIT(12), true, 0x1000 },
+ [RESET_AON_APB_AP_INTC2_SOFT_RST] = { 0x0014, BIT(13), true, 0x1000 },
+ [RESET_AON_APB_AP_INTC3_SOFT_RST] = { 0x0014, BIT(14), true, 0x1000 },
+ [RESET_AON_APB_AP_INTC4_SOFT_RST] = { 0x0014, BIT(15), true, 0x1000 },
+ [RESET_AON_APB_AP_INTC5_SOFT_RST] = { 0x0014, BIT(16), true, 0x1000 },
+ [RESET_AON_APB_AUDCP_INTC_SOFT_RST] = { 0x0014, BIT(17), true, 0x1000 },
+ [RESET_AON_APB_PUBCP_INTC_SOFT_RST] = { 0x0014, BIT(18), true, 0x1000 },
+ [RESET_AON_APB_WTLCP_TGDSP_INTC_SOFT_RST] = { 0x0014, BIT(19), true, 0x1000 },
+ [RESET_AON_APB_WTLCP_LDSP_INTC_SOFT_RST] = { 0x0014, BIT(20), true, 0x1000 },
+ [RESET_AON_APB_WTLCP_INTC_SOFT_RST] = { 0x0014, BIT(21), true, 0x1000 },
+ [RESET_AON_APB_AP_TMR0_SOFT_RST] = { 0x0014, BIT(22), true, 0x1000 },
+ [RESET_AON_APB_AP_TMR1_SOFT_RST] = { 0x0014, BIT(23), true, 0x1000 },
+ [RESET_AON_APB_AP_TMR2_SOFT_RST] = { 0x0014, BIT(24), true, 0x1000 },
+ [RESET_AON_APB_PWM0_SOFT_RST] = { 0x0014, BIT(25), true, 0x1000 },
+ [RESET_AON_APB_PWM1_SOFT_RST] = { 0x0014, BIT(26), true, 0x1000 },
+ [RESET_AON_APB_PWM2_SOFT_RST] = { 0x0014, BIT(27), true, 0x1000 },
+ [RESET_AON_APB_PWM3_SOFT_RST] = { 0x0014, BIT(28), true, 0x1000 },
+ [RESET_AON_APB_AP_WDG_SOFT_RST] = { 0x0014, BIT(29), true, 0x1000 },
+ [RESET_AON_APB_APCPU_WDG_SOFT_RST] = { 0x0014, BIT(30), true, 0x1000 },
+ [RESET_AON_APB_SERDES_SOFT_RST] = { 0x0014, BIT(31), true, 0x1000 },
+ [RESET_AON_APB_DJTAG_SOFT_RST] = { 0x0130, BIT(10), true, 0x1000 },
+};
+
static struct sprd_clk_desc ums512_aon_gate_desc = {
.clk_clks = ums512_aon_gate,
.num_clk_clks = ARRAY_SIZE(ums512_aon_gate),
.hw_clks = &ums512_aon_gate_hws,
+ .resets = ums512_aon_ahb_resets,
+ .num_resets = ARRAY_SIZE(ums512_aon_ahb_resets),
};
/* audcp apb gates */
@@ -1584,10 +1710,18 @@ static struct clk_hw_onecell_data ums512_audcpapb_gate_hws = {
.num = CLK_AUDCP_APB_GATE_NUM,
};
+static struct sprd_reset_map ums512_audcp_apb_resets[] = {
+ [RESET_AUDCP_APB_WDG_SOFT_RST] = { 0x0004, BIT(1), true, 0x100 },
+ [RESET_AUDCP_APB_TMR0_SOFT_RST] = { 0x0004, BIT(2), true, 0x100 },
+ [RESET_AUDCP_APB_TMR1_SOFT_RST] = { 0x0004, BIT(3), true, 0x100 },
+};
+
static const struct sprd_clk_desc ums512_audcpapb_gate_desc = {
.clk_clks = ums512_audcpapb_gate,
.num_clk_clks = ARRAY_SIZE(ums512_audcpapb_gate),
.hw_clks = &ums512_audcpapb_gate_hws,
+ .resets = ums512_audcp_apb_resets,
+ .num_resets = ARRAY_SIZE(ums512_audcp_apb_resets),
};
/* audcp ahb gates */
@@ -1696,10 +1830,29 @@ static struct clk_hw_onecell_data ums512_audcpahb_gate_hws = {
.num = CLK_AUDCP_AHB_GATE_NUM,
};
+static struct sprd_reset_map ums512_audcp_ahb_resets[] = {
+ [RESET_AUDCP_AHB_VBC_24M_SOFT_RST] = { 0x0008, BIT(0), true, 0x100 },
+ [RESET_AUDCP_AHB_DMA_AP_SOFT_RST] = { 0x0008, BIT(1), true, 0x100 },
+ [RESET_AUDCP_AHB_SRC48K_SOFT_RST] = { 0x0008, BIT(5), true, 0x100 },
+ [RESET_AUDCP_AHB_MCDT_SOFT_RST] = { 0x0008, BIT(7), true, 0x100 },
+ [RESET_AUDCP_AHB_VBCIFD_SOFT_RST] = { 0x0008, BIT(8), true, 0x100 },
+ [RESET_AUDCP_AHB_VBC_SOFT_RST] = { 0x0008, BIT(9), true, 0x100 },
+ [RESET_AUDCP_AHB_SPINLOCK_SOFT_RST] = { 0x0008, BIT(10), true, 0x100 },
+ [RESET_AUDCP_AHB_DMA_CP_SOFT_RST] = { 0x0008, BIT(11), true, 0x100 },
+ [RESET_AUDCP_AHB_IIS0_SOFT_RST] = { 0x0008, BIT(12), true, 0x100 },
+ [RESET_AUDCP_AHB_IIS1_SOFT_RST] = { 0x0008, BIT(13), true, 0x100 },
+ [RESET_AUDCP_AHB_IIS2_SOFT_RST] = { 0x0008, BIT(14), true, 0x100 },
+ [RESET_AUDCP_AHB_UART_SOFT_RST] = { 0x0008, BIT(16), true, 0x100 },
+ [RESET_AUDCP_AHB_AUD_SOFT_RST] = { 0x0008, BIT(25), true, 0x100 },
+ [RESET_AUDCP_AHB_DVFS_SOFT_RST] = { 0x0008, BIT(26), true, 0x100 },
+};
+
static const struct sprd_clk_desc ums512_audcpahb_gate_desc = {
.clk_clks = ums512_audcpahb_gate,
.num_clk_clks = ARRAY_SIZE(ums512_audcpahb_gate),
.hw_clks = &ums512_audcpahb_gate_hws,
+ .resets = ums512_audcp_ahb_resets,
+ .num_resets = ARRAY_SIZE(ums512_audcp_ahb_resets),
};
/* gpu clocks */
@@ -1752,10 +1905,17 @@ static struct clk_hw_onecell_data ums512_gpu_clk_hws = {
.num = CLK_GPU_CLK_NUM,
};
+static struct sprd_reset_map ums512_gpu_apb_resets[] = {
+ [RESET_GPU_APB_GPU_CORE_SOFT_RST] = { 0x0000, BIT(0), true, 0x1000 },
+ [RESET_GPU_APB_SYS_SOFT_RST_REQ_CORE] = { 0x0000, BIT(1), true, 0x1000 },
+};
+
static struct sprd_clk_desc ums512_gpu_clk_desc = {
.clk_clks = ums512_gpu_clk,
.num_clk_clks = ARRAY_SIZE(ums512_gpu_clk),
.hw_clks = &ums512_gpu_clk_hws,
+ .resets = ums512_gpu_apb_resets,
+ .num_resets = ARRAY_SIZE(ums512_gpu_apb_resets),
};
/* mm clocks */
@@ -1994,10 +2154,42 @@ static struct clk_hw_onecell_data ums512_mm_gate_clk_hws = {
.num = CLK_MM_GATE_CLK_NUM,
};
+static struct sprd_reset_map ums512_mm_ahb_resets[] = {
+ [RESET_MM_AHB_CKG_SOFT_RST] = { 0x0004, BIT(0), true, 0x1000 },
+ [RESET_MM_AHB_JPG_SOFT_RST] = { 0x0004, BIT(1), true, 0x1000 },
+ [RESET_MM_AHB_DCAM_AXI_SOFT_RST] = { 0x0004, BIT(2), true, 0x1000 },
+ [RESET_MM_AHB_DCAM2_SOFT_RST] = { 0x0004, BIT(3), true, 0x1000 },
+ [RESET_MM_AHB_DCAM1_SOFT_RST] = { 0x0004, BIT(4), true, 0x1000 },
+ [RESET_MM_AHB_DCAM0_SOFT_RST] = { 0x0004, BIT(5), true, 0x1000 },
+ [RESET_MM_AHB_DCAM_VAU_SOFT_RST] = { 0x0004, BIT(6), true, 0x1000 },
+ [RESET_MM_AHB_MIPI_CSI2_SOFT_RST] = { 0x0004, BIT(7), true, 0x1000 },
+ [RESET_MM_AHB_MIPI_CSI1_SOFT_RST] = { 0x0004, BIT(8), true, 0x1000 },
+ [RESET_MM_AHB_MIPI_CSI0_SOFT_RST] = { 0x0004, BIT(9), true, 0x1000 },
+ [RESET_MM_AHB_ISP_SOFT_RST] = { 0x0004, BIT(10), true, 0x1000 },
+ [RESET_MM_AHB_ISP_VAU_SOFT_RST] = { 0x0004, BIT(11), true, 0x1000 },
+ [RESET_MM_AHB_ISP_AHB_SOFT_RST] = { 0x0004, BIT(12), true, 0x1000 },
+ [RESET_MM_AHB_CPP_DMA_SOFT_RST] = { 0x0004, BIT(13), true, 0x1000 },
+ [RESET_MM_AHB_CPP_PATH1_SOFT_RST] = { 0x0004, BIT(14), true, 0x1000 },
+ [RESET_MM_AHB_CPP_PATH0_SOFT_RST] = { 0x0004, BIT(15), true, 0x1000 },
+ [RESET_MM_AHB_CPP_SOFT_RST] = { 0x0004, BIT(16), true, 0x1000 },
+ [RESET_MM_AHB_MM_MAIN_SOFT_RST] = { 0x0004, BIT(17), true, 0x1000 },
+ [RESET_MM_AHB_CPP_SOFT_RST_MASK] = { 0x0004, BIT(18), true, 0x1000 },
+ [RESET_MM_AHB_JPG_SOFT_RST_MASK] = { 0x0004, BIT(19), true, 0x1000 },
+ [RESET_MM_AHB_JPG_VAU_SOFT_RST] = { 0x0004, BIT(20), true, 0x1000 },
+ [RESET_MM_AHB_CPP_VAU_SOFT_RST] = { 0x0004, BIT(21), true, 0x1000 },
+ [RESET_MM_AHB_FD_VAU_SOFT_RST] = { 0x0004, BIT(22), true, 0x1000 },
+ [RESET_MM_AHB_DCAM_ALL_SOFT_RST] = { 0x0004, BIT(23), true, 0x1000 },
+ [RESET_MM_AHB_DVFS_SOFT_RST] = { 0x0004, BIT(24), true, 0x1000 },
+ [RESET_MM_AHB_FD_SOFT_RST] = { 0x0004, BIT(26), true, 0x1000 },
+ [RESET_MM_AHB_FD_SOFT_RST_MASK] = { 0x0004, BIT(27), true, 0x1000 },
+};
+
static struct sprd_clk_desc ums512_mm_gate_clk_desc = {
.clk_clks = ums512_mm_gate_clk,
.num_clk_clks = ARRAY_SIZE(ums512_mm_gate_clk),
.hw_clks = &ums512_mm_gate_clk_hws,
+ .resets = ums512_mm_ahb_resets,
+ .num_resets = ARRAY_SIZE(ums512_mm_ahb_resets),
};
/* ap apb gates */
@@ -2132,10 +2324,38 @@ static struct clk_hw_onecell_data ums512_apapb_gate_hws = {
.num = CLK_AP_APB_GATE_NUM,
};
+static struct sprd_reset_map ums512_ap_apb_resets[] = {
+ [RESET_AP_APB_SIM0_SOFT_RST] = { 0x0004, BIT(0), true, 0x1000 },
+ [RESET_AP_APB_IIS0_SOFT_RST] = { 0x0004, BIT(1), true, 0x1000 },
+ [RESET_AP_APB_IIS1_SOFT_RST] = { 0x0004, BIT(2), true, 0x1000 },
+ [RESET_AP_APB_IIS2_SOFT_RST] = { 0x0004, BIT(3), true, 0x1000 },
+ [RESET_AP_APB_SPI0_SOFT_RST] = { 0x0004, BIT(4), true, 0x1000 },
+ [RESET_AP_APB_SPI1_SOFT_RST] = { 0x0004, BIT(5), true, 0x1000 },
+ [RESET_AP_APB_SPI2_SOFT_RST] = { 0x0004, BIT(6), true, 0x1000 },
+ [RESET_AP_APB_SPI3_SOFT_RST] = { 0x0004, BIT(7), true, 0x1000 },
+ [RESET_AP_APB_I2C0_SOFT_RST] = { 0x0004, BIT(8), true, 0x1000 },
+ [RESET_AP_APB_I2C1_SOFT_RST] = { 0x0004, BIT(9), true, 0x1000 },
+ [RESET_AP_APB_I2C2_SOFT_RST] = { 0x0004, BIT(10), true, 0x1000 },
+ [RESET_AP_APB_I2C3_SOFT_RST] = { 0x0004, BIT(11), true, 0x1000 },
+ [RESET_AP_APB_I2C4_SOFT_RST] = { 0x0004, BIT(12), true, 0x1000 },
+ [RESET_AP_APB_UART0_SOFT_RST] = { 0x0004, BIT(13), true, 0x1000 },
+ [RESET_AP_APB_UART1_SOFT_RST] = { 0x0004, BIT(14), true, 0x1000 },
+ [RESET_AP_APB_UART2_SOFT_RST] = { 0x0004, BIT(15), true, 0x1000 },
+ [RESET_AP_APB_SDIO0_SOFT_RST] = { 0x0004, BIT(16), true, 0x1000 },
+ [RESET_AP_APB_SDIO1_SOFT_RST] = { 0x0004, BIT(17), true, 0x1000 },
+ [RESET_AP_APB_SDIO2_SOFT_RST] = { 0x0004, BIT(18), true, 0x1000 },
+ [RESET_AP_APB_EMMC_SOFT_RST] = { 0x0004, BIT(19), true, 0x1000 },
+ [RESET_AP_APB_CE_SEC_SOFT_RST] = { 0x0004, BIT(20), true, 0x1000 },
+ [RESET_AP_APB_CE_PUB_SOFT_RST] = { 0x0004, BIT(21), true, 0x1000 },
+ [RESET_AP_APB_AP_DVFS_SOFT_RST] = { 0x0004, BIT(22), true, 0x1000 },
+};
+
static struct sprd_clk_desc ums512_apapb_gate_desc = {
.clk_clks = ums512_apapb_gate,
.num_clk_clks = ARRAY_SIZE(ums512_apapb_gate),
.hw_clks = &ums512_apapb_gate_hws,
+ .resets = ums512_ap_apb_resets,
+ .num_resets = ARRAY_SIZE(ums512_ap_apb_resets),
};
static const struct of_device_id sprd_ums512_clk_ids[] = {
@@ -2176,6 +2396,7 @@ MODULE_DEVICE_TABLE(of, sprd_ums512_clk_ids);
static int ums512_clk_probe(struct platform_device *pdev)
{
const struct sprd_clk_desc *desc;
+ struct sprd_reset *reset;
int ret;
desc = device_get_match_data(&pdev->dev);
@@ -2186,6 +2407,25 @@ static int ums512_clk_probe(struct platform_device *pdev)
if (ret)
return ret;
+ if (desc->num_resets > 0) {
+ reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
+ if (!reset)
+ return -ENOMEM;
+
+ spin_lock_init(&reset->lock);
+ reset->rcdev.of_node = pdev->dev.of_node;
+ reset->rcdev.ops = &sprd_reset_ops;
+ reset->rcdev.nr_resets = desc->num_resets;
+ reset->reset_map = desc->resets;
+ reset->regmap = platform_get_drvdata(pdev);
+
+ ret = devm_reset_controller_register(&pdev->dev, &reset->rcdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register reset controller\n");
+ return ret;
+ }
+ }
+
return sprd_clk_probe(&pdev->dev, desc->hw_clks);
}
--
2.17.1
Powered by blists - more mailing lists