| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231215120149.160122-1-sumang@marvell.com>
Date: Fri, 15 Dec 2023 17:31:49 +0530
From: Suman Ghosh <sumang@...vell.com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <sgoutham@...vell.com>, <sbhatta@...vell.com>,
<jerinj@...vell.com>, <gakula@...vell.com>, <hkelam@...vell.com>,
<lcherian@...vell.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Suman Ghosh <sumang@...vell.com>
Subject: [net-next PATCH] octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs
On some silicon variants the number of available CAM entries are
less. Reserving one entry for each NIX-LF for default DMAC based pkt
forwarding rules will reduce the number of available CAM entries
further. Hence add configurability via devlink to set maximum number of
NIX-LFs needed which inturn frees up some CAM entries.
Signed-off-by: Suman Ghosh <sumang@...vell.com>
---
.../net/ethernet/marvell/octeontx2/af/rvu.h | 2 +
.../marvell/octeontx2/af/rvu_devlink.c | 80 +++++++++++++++++++
.../ethernet/marvell/octeontx2/af/rvu_npc.c | 75 +++++++++++------
3 files changed, 133 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 1f3ff4bb8753..6446dc389989 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -949,6 +949,8 @@ int npc_install_mcam_drop_rule(struct rvu *rvu, int mcam_idx, u16 *counter_idx,
u64 bcast_mcast_val, u64 bcast_mcast_mask);
void npc_mcam_rsrcs_reserve(struct rvu *rvu, int blkaddr, int entry_idx);
bool npc_is_feature_supported(struct rvu *rvu, u64 features, u8 intf);
+int npc_mcam_rsrcs_init(struct rvu *rvu, int blkaddr);
+void npc_mcam_rsrcs_deinit(struct rvu *rvu);
/* CPT APIs */
int rvu_cpt_register_interrupts(struct rvu *rvu);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
index 21b5d71c1e37..bb5fdb225dab 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
@@ -1237,6 +1237,7 @@ enum rvu_af_dl_param_id {
RVU_AF_DEVLINK_PARAM_ID_DWRR_MTU,
RVU_AF_DEVLINK_PARAM_ID_NPC_EXACT_FEATURE_DISABLE,
RVU_AF_DEVLINK_PARAM_ID_NPC_MCAM_ZONE_PERCENT,
+ RVU_AF_DEVLINK_PARAM_ID_NIX_MAXLF,
};
static int rvu_af_npc_exact_feature_get(struct devlink *devlink, u32 id,
@@ -1354,6 +1355,79 @@ static int rvu_af_dl_npc_mcam_high_zone_percent_validate(struct devlink *devlink
return 0;
}
+static int rvu_af_dl_nix_maxlf_get(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ struct rvu_devlink *rvu_dl = devlink_priv(devlink);
+ struct rvu *rvu = rvu_dl->rvu;
+
+ ctx->val.vu16 = (u16)rvu_get_nixlf_count(rvu);
+
+ return 0;
+}
+
+static int rvu_af_dl_nix_maxlf_set(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ struct rvu_devlink *rvu_dl = devlink_priv(devlink);
+ struct rvu *rvu = rvu_dl->rvu;
+ struct rvu_block *block;
+ int blkaddr = 0;
+
+ npc_mcam_rsrcs_deinit(rvu);
+ blkaddr = rvu_get_next_nix_blkaddr(rvu, blkaddr);
+ while (blkaddr) {
+ block = &rvu->hw->block[blkaddr];
+ block->lf.max = ctx->val.vu16;
+ blkaddr = rvu_get_next_nix_blkaddr(rvu, blkaddr);
+ }
+
+ blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
+ npc_mcam_rsrcs_init(rvu, blkaddr);
+
+ return 0;
+}
+
+static int rvu_af_dl_nix_maxlf_validate(struct devlink *devlink, u32 id,
+ union devlink_param_value val,
+ struct netlink_ext_ack *extack)
+{
+ struct rvu_devlink *rvu_dl = devlink_priv(devlink);
+ struct rvu *rvu = rvu_dl->rvu;
+ u16 max_nix0_lf, max_nix1_lf;
+ struct npc_mcam *mcam;
+ u64 cfg;
+
+ cfg = rvu_read64(rvu, BLKADDR_NIX0, NIX_AF_CONST2);
+ max_nix0_lf = cfg & 0xFFF;
+ cfg = rvu_read64(rvu, BLKADDR_NIX1, NIX_AF_CONST2);
+ max_nix1_lf = cfg & 0xFFF;
+
+ /* Do not allow user to modify maximum NIX LFs while mcam entries
+ * have already been assigned.
+ */
+ mcam = &rvu->hw->mcam;
+ if (mcam->bmap_fcnt < mcam->bmap_entries) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "mcam entries have already been assigned, can't resize");
+ return -EPERM;
+ }
+
+ if (max_nix0_lf && val.vu16 > max_nix0_lf) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "requested nixlf is greater than the max supported nix0_lf");
+ return -EPERM;
+ }
+
+ if (max_nix1_lf && val.vu16 > max_nix1_lf) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "requested nixlf is greater than the max supported nix1_lf");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct devlink_param rvu_af_dl_params[] = {
DEVLINK_PARAM_DRIVER(RVU_AF_DEVLINK_PARAM_ID_DWRR_MTU,
"dwrr_mtu", DEVLINK_PARAM_TYPE_U32,
@@ -1375,6 +1449,12 @@ static const struct devlink_param rvu_af_dl_param_exact_match[] = {
rvu_af_dl_npc_mcam_high_zone_percent_get,
rvu_af_dl_npc_mcam_high_zone_percent_set,
rvu_af_dl_npc_mcam_high_zone_percent_validate),
+ DEVLINK_PARAM_DRIVER(RVU_AF_DEVLINK_PARAM_ID_NIX_MAXLF,
+ "nix_maxlf", DEVLINK_PARAM_TYPE_U16,
+ BIT(DEVLINK_PARAM_CMODE_RUNTIME),
+ rvu_af_dl_nix_maxlf_get,
+ rvu_af_dl_nix_maxlf_set,
+ rvu_af_dl_nix_maxlf_validate),
};
/* Devlink switch mode */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 2897a8b8e558..513c4fe86967 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -1846,7 +1846,21 @@ static void npc_parser_profile_init(struct rvu *rvu, int blkaddr)
npc_program_kpu_profile(rvu, blkaddr, idx, &rvu->kpu.kpu[idx]);
}
-static int npc_mcam_rsrcs_init(struct rvu *rvu, int blkaddr)
+void npc_mcam_rsrcs_deinit(struct rvu *rvu)
+{
+ struct npc_mcam *mcam = &rvu->hw->mcam;
+
+ kfree(mcam->bmap);
+ kfree(mcam->bmap_reverse);
+ kfree(mcam->entry2pfvf_map);
+ kfree(mcam->cntr2pfvf_map);
+ kfree(mcam->entry2cntr_map);
+ kfree(mcam->cntr_refcnt);
+ kfree(mcam->entry2target_pffunc);
+ kfree(mcam->counters.bmap);
+}
+
+int npc_mcam_rsrcs_init(struct rvu *rvu, int blkaddr)
{
int nixlf_count = rvu_get_nixlf_count(rvu);
struct npc_mcam *mcam = &rvu->hw->mcam;
@@ -1890,24 +1904,23 @@ static int npc_mcam_rsrcs_init(struct rvu *rvu, int blkaddr)
mcam->pf_offset = mcam->nixlf_offset + nixlf_count;
/* Allocate bitmaps for managing MCAM entries */
- mcam->bmap = devm_kcalloc(rvu->dev, BITS_TO_LONGS(mcam->bmap_entries),
- sizeof(long), GFP_KERNEL);
+ mcam->bmap = kmalloc_array(BITS_TO_LONGS(mcam->bmap_entries),
+ sizeof(long), GFP_KERNEL);
if (!mcam->bmap)
return -ENOMEM;
- mcam->bmap_reverse = devm_kcalloc(rvu->dev,
- BITS_TO_LONGS(mcam->bmap_entries),
- sizeof(long), GFP_KERNEL);
+ mcam->bmap_reverse = kmalloc_array(BITS_TO_LONGS(mcam->bmap_entries),
+ sizeof(long), GFP_KERNEL);
if (!mcam->bmap_reverse)
- return -ENOMEM;
+ goto free_bmap;
mcam->bmap_fcnt = mcam->bmap_entries;
/* Alloc memory for saving entry to RVU PFFUNC allocation mapping */
- mcam->entry2pfvf_map = devm_kcalloc(rvu->dev, mcam->bmap_entries,
- sizeof(u16), GFP_KERNEL);
+ mcam->entry2pfvf_map = kmalloc_array(mcam->bmap_entries,
+ sizeof(u16), GFP_KERNEL);
if (!mcam->entry2pfvf_map)
- return -ENOMEM;
+ goto free_bmap_reverse;
/* Reserve 1/8th of MCAM entries at the bottom for low priority
* allocations and another 1/8th at the top for high priority
@@ -1926,31 +1939,31 @@ static int npc_mcam_rsrcs_init(struct rvu *rvu, int blkaddr)
*/
err = rvu_alloc_bitmap(&mcam->counters);
if (err)
- return err;
+ goto free_entry_map;
- mcam->cntr2pfvf_map = devm_kcalloc(rvu->dev, mcam->counters.max,
- sizeof(u16), GFP_KERNEL);
+ mcam->cntr2pfvf_map = kmalloc_array(mcam->counters.max,
+ sizeof(u16), GFP_KERNEL);
if (!mcam->cntr2pfvf_map)
- goto free_mem;
+ goto free_cntr_bmap;
/* Alloc memory for MCAM entry to counter mapping and for tracking
* counter's reference count.
*/
- mcam->entry2cntr_map = devm_kcalloc(rvu->dev, mcam->bmap_entries,
- sizeof(u16), GFP_KERNEL);
+ mcam->entry2cntr_map = kmalloc_array(mcam->bmap_entries,
+ sizeof(u16), GFP_KERNEL);
if (!mcam->entry2cntr_map)
- goto free_mem;
+ goto free_cntr_map;
- mcam->cntr_refcnt = devm_kcalloc(rvu->dev, mcam->counters.max,
- sizeof(u16), GFP_KERNEL);
+ mcam->cntr_refcnt = kmalloc_array(mcam->counters.max,
+ sizeof(u16), GFP_KERNEL);
if (!mcam->cntr_refcnt)
- goto free_mem;
+ goto free_entry_cntr_map;
/* Alloc memory for saving target device of mcam rule */
- mcam->entry2target_pffunc = devm_kcalloc(rvu->dev, mcam->total_entries,
- sizeof(u16), GFP_KERNEL);
+ mcam->entry2target_pffunc = kmalloc_array(mcam->total_entries,
+ sizeof(u16), GFP_KERNEL);
if (!mcam->entry2target_pffunc)
- goto free_mem;
+ goto free_cntr_refcnt;
for (index = 0; index < mcam->bmap_entries; index++) {
mcam->entry2pfvf_map[index] = NPC_MCAM_INVALID_MAP;
@@ -1964,8 +1977,21 @@ static int npc_mcam_rsrcs_init(struct rvu *rvu, int blkaddr)
return 0;
-free_mem:
+free_cntr_refcnt:
+ kfree(mcam->cntr_refcnt);
+free_entry_cntr_map:
+ kfree(mcam->entry2cntr_map);
+free_cntr_map:
+ kfree(mcam->cntr2pfvf_map);
+free_cntr_bmap:
+ kfree(mcam->counters.bmap);
+free_entry_map:
+ kfree(mcam->entry2pfvf_map);
+free_bmap_reverse:
+ kfree(mcam->bmap_reverse);
+free_bmap:
kfree(mcam->counters.bmap);
+
return -ENOMEM;
}
@@ -2173,6 +2199,7 @@ void rvu_npc_freemem(struct rvu *rvu)
struct npc_mcam *mcam = &rvu->hw->mcam;
kfree(pkind->rsrc.bmap);
+ npc_mcam_rsrcs_deinit(rvu);
kfree(mcam->counters.bmap);
if (rvu->kpu_prfl_addr)
iounmap(rvu->kpu_prfl_addr);
--
2.25.1
Powered by blists - more mailing lists