linux-kernel - [PATCH 4/4] MIPS: mobileye: eyeq5: add reset properties to uarts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Mon, 18 Dec 2023 18:16:15 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>, 
 Gregory CLEMENT <gregory.clement@...tlin.com>, 
 Philipp Zabel <p.zabel@...gutronix.de>, Rob Herring <robh+dt@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: linux-mips@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, 
 Thomas Petazzoni <thomas.petazzoni@...tlin.com>, 
 Tawfik Bayouk <tawfik.bayouk@...ileye.com>, 
 Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH 4/4] MIPS: mobileye: eyeq5: add reset properties to uarts

UART nodes have been added to the devicetree by the initial platform
support patch series. Add reset properties now that the reset node is
declared.

Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index b7da037ef324..746148eb423f 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -51,6 +51,7 @@ uart0: serial@...000 {
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&reset 0 EQ5R_D0_UART0>;
 		};
 
 		uart1: serial@...000 {
@@ -61,6 +62,7 @@ uart1: serial@...000 {
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&reset 0 EQ5R_D0_UART1>;
 		};
 
 		uart2: serial@...000 {
@@ -71,6 +73,7 @@ uart2: serial@...000 {
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&reset 0 EQ5R_D0_UART2>;
 		};
 
 		olb: olb@...000 {

-- 
2.43.0