linux-kernel - [PATCH v4 7/9] riscv: dts: starfive: beaglev-starlight: Setup phy reset gpio

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231218214451.2345691-8-cristian.ciocaltea@collabora.com>
Date: Mon, 18 Dec 2023 23:44:47 +0200
From: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
To: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Emil Renner Berthing <kernel@...il.dk>,
	Samin Guo <samin.guo@...rfivetech.com>,
	Paul Walmsley <paul.walmsley@...ive.com>,
	Palmer Dabbelt <palmer@...belt.com>,
	Albert Ou <aou@...s.berkeley.edu>,
	Hal Feng <hal.feng@...rfivetech.com>,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...nel.org>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Jose Abreu <joabreu@...opsys.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Richard Cochran <richardcochran@...il.com>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-riscv@...ts.infradead.org,
	linux-clk@...r.kernel.org,
	linux-stm32@...md-mailman.stormreply.com,
	linux-arm-kernel@...ts.infradead.org,
	kernel@...labora.com,
	Emil Renner Berthing <emil.renner.berthing@...onical.com>
Subject: [PATCH v4 7/9] riscv: dts: starfive: beaglev-starlight: Setup phy reset gpio

The BeagleV Starlight SBC uses a Microchip KSZ9031RNXCA PHY supporting
RGMII-ID which doesn't require any particular setup, other than defining
a reset gpio, as opposed to VisionFive V1 for which the RX internal
delay had to be adjusted.

Co-developed-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
---
 .../boot/dts/starfive/jh7100-beaglev-starlight.dts    | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
index 7cda3a89020a..b79426935bfd 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -11,3 +11,14 @@ / {
 	model = "BeagleV Starlight Beta";
 	compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
 };
+
+&mdio {
+	phy: ethernet-phy@7 {
+		reg = <7>;
+		reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gmac {
+	phy-handle = <&phy>;
+};
-- 
2.43.0