lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231218232639.33327-2-wahrenst@gmx.net>
Date: Tue, 19 Dec 2023 00:26:28 +0100
From: Stefan Wahren <wahrenst@....net>
To: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>
Cc: netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Stefan Wahren <wahrenst@....net>
Subject: [PATCH V2 01/12 net-next] qca_spi: Improve SPI thread creation

The qca_spi driver create/stop the SPI kernel thread in case
of netdev_open/close. This isn't optimal because there is no
need for such an expensive operation.

So improve this by moving create/stop of the SPI kernel into
the init/uninit ops. The open/close ops could just
'park/unpark' the SPI kernel thread.

Signed-off-by: Stefan Wahren <wahrenst@....net>
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 33 ++++++++++++++-----------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 5f3c11fb3fa2..fc272ca7bdca 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -697,25 +697,17 @@ qcaspi_netdev_open(struct net_device *dev)
 	qca->sync = QCASPI_SYNC_UNKNOWN;
 	qcafrm_fsm_init_spi(&qca->frm_handle);

-	qca->spi_thread = kthread_run((void *)qcaspi_spi_thread,
-				      qca, "%s", dev->name);
-
-	if (IS_ERR(qca->spi_thread)) {
-		netdev_err(dev, "%s: unable to start kernel thread.\n",
-			   QCASPI_DRV_NAME);
-		return PTR_ERR(qca->spi_thread);
-	}
-
 	ret = request_irq(qca->spi_dev->irq, qcaspi_intr_handler, 0,
 			  dev->name, qca);
 	if (ret) {
 		netdev_err(dev, "%s: unable to get IRQ %d (irqval=%d).\n",
 			   QCASPI_DRV_NAME, qca->spi_dev->irq, ret);
-		kthread_stop(qca->spi_thread);
 		return ret;
 	}

 	/* SPI thread takes care of TX queue */
+	kthread_unpark(qca->spi_thread);
+	wake_up_process(qca->spi_thread);

 	return 0;
 }
@@ -725,15 +717,11 @@ qcaspi_netdev_close(struct net_device *dev)
 {
 	struct qcaspi *qca = netdev_priv(dev);

-	netif_stop_queue(dev);
+	kthread_park(qca->spi_thread);

 	qcaspi_write_register(qca, SPI_REG_INTR_ENABLE, 0, wr_verify);
 	free_irq(qca->spi_dev->irq, qca);

-	kthread_stop(qca->spi_thread);
-	qca->spi_thread = NULL;
-	qcaspi_flush_tx_ring(qca);
-
 	return 0;
 }

@@ -825,6 +813,7 @@ static int
 qcaspi_netdev_init(struct net_device *dev)
 {
 	struct qcaspi *qca = netdev_priv(dev);
+	struct task_struct *thread;

 	dev->mtu = QCAFRM_MAX_MTU;
 	dev->type = ARPHRD_ETHER;
@@ -848,6 +837,15 @@ qcaspi_netdev_init(struct net_device *dev)
 		return -ENOBUFS;
 	}

+	thread = kthread_create(qcaspi_spi_thread, qca, "%s", dev->name);
+	if (IS_ERR(thread)) {
+		netdev_err(dev, "%s: unable to start kernel thread.\n",
+			   QCASPI_DRV_NAME);
+		return PTR_ERR(thread);
+	}
+
+	qca->spi_thread = thread;
+
 	return 0;
 }

@@ -856,6 +854,11 @@ qcaspi_netdev_uninit(struct net_device *dev)
 {
 	struct qcaspi *qca = netdev_priv(dev);

+	if (qca->spi_thread) {
+		kthread_stop(qca->spi_thread);
+		qca->spi_thread = NULL;
+	}
+
 	kfree(qca->rx_buffer);
 	qca->buffer_size = 0;
 	dev_kfree_skb(qca->rx_skb);
--
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ