lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231218113943.9099-6-jankul@alatek.krakow.pl>
Date: Mon, 18 Dec 2023 12:39:40 +0100
From: Jan Kuliga <jankul@...tek.krakow.pl>
To: lizhi.hou@....com,
	brian.xu@....com,
	raj.kumar.rampelli@....com,
	vkoul@...nel.org,
	michal.simek@....com,
	dmaengine@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	miquel.raynal@...tlin.com
Cc: jankul@...tek.krakow.pl
Subject: [PATCH v5 5/8] dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr()

Check and clear the status register value before proceeding any
further in xdma_channel_isr(). It is necessary to do it since the
interrupt may occur on any error condition enabled at the start of a
transfer.

Signed-off-by: Jan Kuliga <jankul@...tek.krakow.pl>
---
 drivers/dma/xilinx/xdma.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
index 0c7350863873..9a1d2939a333 100644
--- a/drivers/dma/xilinx/xdma.c
+++ b/drivers/dma/xilinx/xdma.c
@@ -811,6 +811,18 @@ static irqreturn_t xdma_channel_isr(int irq, void *dev_id)
 	desc = to_xdma_desc(vd);
 	xdev = xchan->xdev_hdl;
 
+	/* Clear-on-read the status register */
+	ret = regmap_read(xdev->rmap, xchan->base + XDMA_CHAN_STATUS_RC, &st);
+	if (ret)
+		goto out;
+
+	st &= XDMA_CHAN_STATUS_MASK;
+	if ((st & XDMA_CHAN_ERROR_MASK) ||
+	    !(st & (CHAN_CTRL_IE_DESC_COMPLETED | CHAN_CTRL_IE_DESC_STOPPED))) {
+		xdma_err(xdev, "channel error, status register value: 0x%x", st);
+		goto out;
+	}
+
 	ret = regmap_read(xdev->rmap, xchan->base + XDMA_CHAN_COMPLETED_DESC,
 			  &complete_desc_num);
 	if (ret)
@@ -818,14 +830,6 @@ static irqreturn_t xdma_channel_isr(int irq, void *dev_id)
 
 	if (desc->cyclic) {
 		desc->completed_desc_num = complete_desc_num;
-
-		ret = regmap_read(xdev->rmap, xchan->base + XDMA_CHAN_STATUS,
-				  &st);
-		if (ret)
-			goto out;
-
-		regmap_write(xdev->rmap, xchan->base + XDMA_CHAN_STATUS, st);
-
 		vchan_cyclic_callback(vd);
 	} else {
 		xchan->busy = false;
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ