| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <202312182113+0800-wangjinchao@xfusion.com>
Date: Mon, 18 Dec 2023 21:15:01 +0800
From: WangJinchao <wangjinchao@...sion.com>
To: Herbert Xu <herbert@...dor.apana.org.au>, "David S. Miller"
<davem@...emloft.net>, Tim Chen <tim.c.chen@...ux.intel.com>,
<linux-crypto@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <stone.xulei@...sion.com>, <wangjinchao@...sion.com>
Subject: [PATCH v2] crypto:tcrypt: add script tcrypt_speed_compare.py
Create a script for comparing tcrypt speed test logs.
The script will systematically analyze differences item
by item and provide a summary (average).
This tool is useful for evaluating the stability of
cryptographic module algorithms and assisting with
performance optimization.
Please note that for such a comparison, stability depends
on whether we allow frequency to float or pin the frequency.
The script produces comparisons in two scenes:
1. For operations in seconds
================================================================================
rfc4106(gcm(aes)) (pcrypt(rfc4106(gcm_base(ctr(aes-generic),ghash-generic))))
encryption
--------------------------------------------------------------------------------
bit key | byte blocks | base ops | new ops | differ(%)
160 | 16 | 66439 | 63063 | -5.08
160 | 64 | 62220 | 57439 | -7.68
...
288 | 4096 | 15059 | 16278 | 8.09
288 | 8192 | 9043 | 9526 | 5.34
--------------------------------------------------------------------------------
average differ(%s) | total_differ(%)
--------------------------------------------------------------------------------
5.70 | -4.49
================================================================================
2. For avg cycles of operation
================================================================================
rfc4106(gcm(aes)) (pcrypt(rfc4106(gcm_base(ctr(aes-generic),ghash-generic))))
encryption
--------------------------------------------------------------------------------
bit key | byte blocks | base cycles | new cycles | differ(%)
160 | 16 | 32500 | 35847 | 10.3
160 | 64 | 33175 | 45808 | 38.08
...
288 | 4096 | 131369 | 132132 | 0.58
288 | 8192 | 229503 | 234581 | 2.21
--------------------------------------------------------------------------------
average differ(%s) | total_differ(%)
--------------------------------------------------------------------------------
8.41 | -6.70
================================================================================
Signed-off-by: WangJinchao <wangjinchao@...sion.com>
---
MAINTAINERS | 6 +
tools/crypto/tcrypt/tcrypt_speed_compare.py | 190 ++++++++++++++++++++
2 files changed, 196 insertions(+)
create mode 100755 tools/crypto/tcrypt/tcrypt_speed_compare.py
diff --git a/MAINTAINERS b/MAINTAINERS
index bba17f97eda7..b9c8dd607bce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5524,6 +5524,12 @@ F: include/crypto/
F: include/linux/crypto*
F: lib/crypto/
+CRYPTO SPEED TEST COMPARE
+M: Wang Jinchao <wangjinchao@...sion.com>
+L: linux-crypto@...r.kernel.org
+S: Maintained
+F: tools/crypto/tcrypt/tcrypt_speed_compare.py
+
CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
M: Neil Horman <nhorman@...driver.com>
L: linux-crypto@...r.kernel.org
diff --git a/tools/crypto/tcrypt/tcrypt_speed_compare.py b/tools/crypto/tcrypt/tcrypt_speed_compare.py
new file mode 100755
index 000000000000..f3f5783cdc06
--- /dev/null
+++ b/tools/crypto/tcrypt/tcrypt_speed_compare.py
@@ -0,0 +1,190 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) xFusion Digital Technologies Co., Ltd., 2023
+#
+# Author: Wang Jinchao <wangjinchao@...sion.com>
+#
+"""
+A tool for comparing tcrypt speed test logs.
+
+Please note that for such a comparison, stability depends
+on whether we allow frequency to float or pin the frequency.
+
+Both support tests for operations within one second and
+cycles of operation.
+For example, use it in the bash script below.
+
+```bash
+#!/bin/bash
+
+# log file prefix
+seq_num=0
+
+# When sec=0, it will perform cycle tests;
+# otherwise, it indicates the duration of a single test
+sec=0
+num_mb=8
+mode=211
+
+# base speed test
+lsmod | grep pcrypt && modprobe -r pcrypt
+dmesg -C
+modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3
+modprobe tcrypt mode=${mode} sec=${sec} num_mb=${num_mb}
+dmesg > ${seq_num}_base_dmesg.log
+
+# new speed test
+lsmod | grep pcrypt && modprobe -r pcrypt
+dmesg -C
+modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3
+modprobe tcrypt mode=${mode} sec=${sec} num_mb=${num_mb}
+dmesg > ${seq_num}_new_dmesg.log
+lsmod | grep pcrypt && modprobe -r pcrypt
+
+tools/crypto/tcrypt/tcrypt_speed_compare.py \
+ ${seq_num}_base_dmesg.log \
+ ${seq_num}_new_dmesg.log \
+ >${seq_num}_compare.log
+grep 'average' -A2 -B0 --group-separator="" ${seq_num}_compare.log
+```
+"""
+
+import sys
+import re
+
+
+def parse_title(line):
+ pattern = r'tcrypt: testing speed of (.*?) (encryption|decryption)'
+ match = re.search(pattern, line)
+ if match:
+ alg = match.group(1)
+ op = match.group(2)
+ return alg, op
+ else:
+ return "", ""
+
+
+def parse_item(line):
+ pattern_operations = r'\((\d+) bit key, (\d+) byte blocks\): (\d+) operations'
+ pattern_cycles = r'\((\d+) bit key, (\d+) byte blocks\): 1 operation in (\d+) cycles'
+ match = re.search(pattern_operations, line)
+ if match:
+ res = {
+ "bit_key": int(match.group(1)),
+ "byte_blocks": int(match.group(2)),
+ "operations": int(match.group(3)),
+ }
+ return res
+
+ match = re.search(pattern_cycles, line)
+ if match:
+ res = {
+ "bit_key": int(match.group(1)),
+ "byte_blocks": int(match.group(2)),
+ "cycles": int(match.group(3)),
+ }
+ return res
+
+ return None
+
+
+def parse(filepath):
+ result = {}
+ alg, op = "", ""
+ with open(filepath, 'r') as file:
+ for line in file:
+ if not line:
+ continue
+ _alg, _op = parse_title(line)
+ if _alg:
+ alg, op = _alg, _op
+ if alg not in result:
+ result[alg] = {}
+ if op not in result[alg]:
+ result[alg][op] = []
+ continue
+ parsed_result = parse_item(line)
+ if parsed_result:
+ result[alg][op].append(parsed_result)
+ return result
+
+
+def merge(base, new):
+ merged = {}
+ for alg in base.keys():
+ merged[alg] = {}
+ for op in base[alg].keys():
+ if op not in merged[alg]:
+ merged[alg][op] = []
+ for index in range(len(base[alg][op])):
+ merged_item = {
+ "bit_key": base[alg][op][index]["bit_key"],
+ "byte_blocks": base[alg][op][index]["byte_blocks"],
+ }
+ if "operations" in base[alg][op][index].keys():
+ merged_item["base_ops"] = base[alg][op][index]["operations"]
+ merged_item["new_ops"] = new[alg][op][index]["operations"]
+ else:
+ merged_item["base_cycles"] = base[alg][op][index]["cycles"]
+ merged_item["new_cycles"] = new[alg][op][index]["cycles"]
+
+ merged[alg][op].append(merged_item)
+ return merged
+
+
+def format(merged):
+ for alg in merged.keys():
+ for op in merged[alg].keys():
+ base_sum = 0
+ new_sum = 0
+ differ_sum = 0
+ differ_cnt = 0
+ print()
+ hlen = 80
+ print("="*hlen)
+ print(f"{alg}")
+ print(f"{' '*(len(alg)//3) + op}")
+ print("-"*hlen)
+ key = ""
+ if "base_ops" in merged[alg][op][0]:
+ key = "ops"
+ print(f"bit key | byte blocks | base ops | new ops | differ(%)")
+ else:
+ key = "cycles"
+ print(f"bit key | byte blocks | base cycles | new cycles | differ(%)")
+ for index in range(len(merged[alg][op])):
+ item = merged[alg][op][index]
+ base_cnt = item[f"base_{key}"]
+ new_cnt = item[f"new_{key}"]
+ base_sum += base_cnt
+ new_sum += new_cnt
+ differ = round((new_cnt - base_cnt)*100/base_cnt, 2)
+ differ_sum += differ
+ differ_cnt += 1
+ bit_key = item["bit_key"]
+ byte_blocks = item["byte_blocks"]
+ print(
+ f"{bit_key:<7} | {byte_blocks:<11} | {base_cnt:<11} | {new_cnt:<11} | {differ:<8}")
+ average_speed_up = "{:.2f}".format(differ_sum/differ_cnt)
+ ops_total_speed_up = "{:.2f}".format(
+ (base_sum - new_sum) * 100 / base_sum)
+ print('-'*hlen)
+ print(f"average differ(%s) | total_differ(%)")
+ print('-'*hlen)
+ print(f"{average_speed_up:<21} | {ops_total_speed_up:<10}")
+ print('='*hlen)
+
+
+def main(base_log, new_log):
+ base = parse(base_log)
+ new = parse(new_log)
+ merged = merge(base, new)
+ format(merged)
+
+
+if __name__ == "__main__":
+ if len(sys.argv) != 3:
+ print(f"usage: {sys.argv[0]} base_log new_log")
+ exit(-1)
+ main(sys.argv[1], sys.argv[2])
--
2.40.0
Powered by blists - more mailing lists