| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231219185631.809766769@goodmis.org>
Date: Tue, 19 Dec 2023 13:54:29 -0500
From: Steven Rostedt <rostedt@...dmis.org>
To: linux-kernel@...r.kernel.org,
linux-trace-kernel@...r.kernel.org
Cc: Masami Hiramatsu <mhiramat@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Tzvetomir Stoyanov <tz.stoyanov@...il.com>,
Vincent Donnefort <vdonnefort@...gle.com>,
Kent Overstreet <kent.overstreet@...il.com>
Subject: [PATCH v5 15/15] tracing: Update subbuffer with kilobytes not page order
From: "Steven Rostedt (Google)" <rostedt@...dmis.org>
Using page order for deciding what the size of the ring buffer sub buffers
are is exposing a bit too much of the implementation. Although the sub
buffers are only allocated in orders of pages, allow the user to specify
the minimum size of each sub-buffer via kilobytes like they can with the
buffer size itself.
If the user specifies 3 via:
echo 3 > buffer_subbuf_size_kb
Then the sub-buffer size will round up to 4kb (on a 4kb page size system).
If they specify:
echo 6 > buffer_subbuf_size_kb
The sub-buffer size will become 8kb.
and so on.
Signed-off-by: Steven Rostedt (Google) <rostedt@...dmis.org>
---
Documentation/trace/ftrace.rst | 46 ++++++++-----------
kernel/trace/trace.c | 38 +++++++++------
...fer_order.tc => ringbuffer_subbuf_size.tc} | 18 ++++----
3 files changed, 54 insertions(+), 48 deletions(-)
rename tools/testing/selftests/ftrace/test.d/00basic/{ringbuffer_order.tc => ringbuffer_subbuf_size.tc} (85%)
diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst
index 231d26ceedb0..933e7efb9f1b 100644
--- a/Documentation/trace/ftrace.rst
+++ b/Documentation/trace/ftrace.rst
@@ -203,32 +203,26 @@ of ftrace. Here is a list of some of the key files:
This displays the total combined size of all the trace buffers.
- buffer_subbuf_order:
-
- This sets or displays the sub buffer page size order. The ring buffer
- is broken up into several same size "sub buffers". An event can not be
- bigger than the size of the sub buffer. Normally, the sub buffer is
- the size of the architecture's page (4K on x86). The sub buffer also
- contains meta data at the start which also limits the size of an event.
- That means when the sub buffer is a page size, no event can be larger
- than the page size minus the sub buffer meta data.
-
- The buffer_subbuf_order allows the user to change the size of the sub
- buffer. As the sub buffer is a set of pages by the power of 2, thus
- the sub buffer total size is defined by the order:
-
- order size
- ---- ----
- 0 PAGE_SIZE
- 1 PAGE_SIZE * 2
- 2 PAGE_SIZE * 4
- 3 PAGE_SIZE * 8
-
- Changing the order will change the sub buffer size allowing for events
- to be larger than the page size.
-
- Note: When changing the order, tracing is stopped and any data in the
- ring buffer and the snapshot buffer will be discarded.
+ buffer_subbuf_size_kb:
+
+ This sets or displays the sub buffer size. The ring buffer is broken up
+ into several same size "sub buffers". An event can not be bigger than
+ the size of the sub buffer. Normally, the sub buffer is the size of the
+ architecture's page (4K on x86). The sub buffer also contains meta data
+ at the start which also limits the size of an event. That means when
+ the sub buffer is a page size, no event can be larger than the page
+ size minus the sub buffer meta data.
+
+ Note, the buffer_subbuf_size_kb is a way for the user to specify the
+ minimum size of the subbuffer. The kernel may make it bigger due to the
+ implementation details, or simply fail the operation if the kernel can
+ not handle the request.
+
+ Changing the sub buffer size allows for events to be larger than the
+ page size.
+
+ Note: When changing the sub-buffer size, tracing is stopped and any
+ data in the ring buffer and the snapshot buffer will be discarded.
free_buffer:
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 82303bd2bba1..46dbe22121e9 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -9384,42 +9384,54 @@ static const struct file_operations buffer_percent_fops = {
};
static ssize_t
-buffer_order_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
+buffer_subbuf_size_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
{
struct trace_array *tr = filp->private_data;
+ size_t size;
char buf[64];
+ int order;
int r;
- r = sprintf(buf, "%d\n", ring_buffer_subbuf_order_get(tr->array_buffer.buffer));
+ order = ring_buffer_subbuf_order_get(tr->array_buffer.buffer);
+ size = (PAGE_SIZE << order) / 1024;
+
+ r = sprintf(buf, "%zd\n", size);
return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
}
static ssize_t
-buffer_order_write(struct file *filp, const char __user *ubuf,
- size_t cnt, loff_t *ppos)
+buffer_subbuf_size_write(struct file *filp, const char __user *ubuf,
+ size_t cnt, loff_t *ppos)
{
struct trace_array *tr = filp->private_data;
unsigned long val;
int old_order;
+ int order;
+ int pages;
int ret;
ret = kstrtoul_from_user(ubuf, cnt, 10, &val);
if (ret)
return ret;
+ val *= 1024; /* value passed in is in KB */
+
+ pages = DIV_ROUND_UP(val, PAGE_SIZE);
+ order = fls(pages - 1);
+
/* limit between 1 and 128 system pages */
- if (val < 0 || val > 7)
+ if (order < 0 || order > 7)
return -EINVAL;
/* Do not allow tracing while changing the order of the ring buffer */
tracing_stop_tr(tr);
old_order = ring_buffer_subbuf_order_get(tr->array_buffer.buffer);
- if (old_order == val)
+ if (old_order == order)
goto out;
- ret = ring_buffer_subbuf_order_set(tr->array_buffer.buffer, val);
+ ret = ring_buffer_subbuf_order_set(tr->array_buffer.buffer, order);
if (ret)
goto out;
@@ -9428,7 +9440,7 @@ buffer_order_write(struct file *filp, const char __user *ubuf,
if (!tr->allocated_snapshot)
goto out_max;
- ret = ring_buffer_subbuf_order_set(tr->max_buffer.buffer, val);
+ ret = ring_buffer_subbuf_order_set(tr->max_buffer.buffer, order);
if (ret) {
/* Put back the old order */
cnt = ring_buffer_subbuf_order_set(tr->array_buffer.buffer, old_order);
@@ -9460,10 +9472,10 @@ buffer_order_write(struct file *filp, const char __user *ubuf,
return cnt;
}
-static const struct file_operations buffer_order_fops = {
+static const struct file_operations buffer_subbuf_size_fops = {
.open = tracing_open_generic_tr,
- .read = buffer_order_read,
- .write = buffer_order_write,
+ .read = buffer_subbuf_size_read,
+ .write = buffer_subbuf_size_write,
.release = tracing_release_generic_tr,
.llseek = default_llseek,
};
@@ -9934,8 +9946,8 @@ init_tracer_tracefs(struct trace_array *tr, struct dentry *d_tracer)
trace_create_file("buffer_percent", TRACE_MODE_WRITE, d_tracer,
tr, &buffer_percent_fops);
- trace_create_file("buffer_subbuf_order", TRACE_MODE_WRITE, d_tracer,
- tr, &buffer_order_fops);
+ trace_create_file("buffer_subbuf_size_kb", TRACE_MODE_WRITE, d_tracer,
+ tr, &buffer_subbuf_size_fops);
create_trace_options_dir(tr);
diff --git a/tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_order.tc b/tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_subbuf_size.tc
similarity index 85%
rename from tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_order.tc
rename to tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_subbuf_size.tc
index ecbcc810e6c1..d44d09a33a74 100644
--- a/tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_order.tc
+++ b/tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_subbuf_size.tc
@@ -1,7 +1,7 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
-# description: Change the ringbuffer sub-buffer order
-# requires: buffer_subbuf_order
+# description: Change the ringbuffer sub-buffer size
+# requires: buffer_subbuf_size_kb
# flags: instance
get_buffer_data_size() {
@@ -52,8 +52,8 @@ write_buffer() {
}
test_buffer() {
- orde=$1
- page_size=$((4096<<order))
+ size_kb=$1
+ page_size=$((size_kb*1024))
size=`get_buffer_data_size`
@@ -82,14 +82,14 @@ test_buffer() {
fi
}
-ORIG=`cat buffer_subbuf_order`
+ORIG=`cat buffer_subbuf_size_kb`
-# Could test bigger orders than 3, but then creating the string
+# Could test bigger sizes than 32K, but then creating the string
# to write into the ring buffer takes too long
-for a in 0 1 2 3 ; do
- echo $a > buffer_subbuf_order
+for a in 4 8 16 32 ; do
+ echo $a > buffer_subbuf_size_kb
test_buffer $a
done
-echo $ORIG > buffer_subbuf_order
+echo $ORIG > buffer_subbuf_size_kb
--
2.42.0
Powered by blists - more mailing lists