| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5140336980f66c2c45f05895c3b68e2f65fba1c2.1703013352.git.marcelo.schmitt1@gmail.com>
Date: Tue, 19 Dec 2023 17:28:45 -0300
From: Marcelo Schmitt <marcelo.schmitt@...log.com>
To: <apw@...onical.com>, <joe@...ches.com>, <dwaipayanray1@...il.com>,
<lukas.bulwahn@...il.com>, <paul.cercueil@...log.com>,
<Michael.Hennerich@...log.com>, <lars@...afoo.de>, <jic23@...nel.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <dan.carpenter@...aro.org>,
<dlechner@...libre.com>, <marcelo.schmitt1@...il.com>
CC: <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v5 06/11] iio: adc: ad7091r: Set device mode through chip_info callback
AD7091R-5 devices have a few modes of operation (sample, command,
autocycle) which are set by writing to configuration register fields.
Follow up patches will add support for AD7091R-2/-4/-8 which don't have
those operation modes nor the register fields for setting them.
Make ad7091r_set_mode() a callback function of AD7091R chip_info struct
so the base driver can appropriately handle each design without having
to check which actual chip is connected.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@...log.com>
---
drivers/iio/adc/ad7091r-base.c | 38 +---------------------------------
drivers/iio/adc/ad7091r-base.h | 8 +++++++
drivers/iio/adc/ad7091r5.c | 30 +++++++++++++++++++++++++++
3 files changed, 39 insertions(+), 37 deletions(-)
diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
index 2c65c63db40c..a4ca2e21e023 100644
--- a/drivers/iio/adc/ad7091r-base.c
+++ b/drivers/iio/adc/ad7091r-base.c
@@ -20,14 +20,6 @@
#define AD7091R_REG_RESULT_CH_ID(x) (((x) >> 13) & 0x3)
#define AD7091R_REG_RESULT_CONV_RESULT(x) ((x) & 0xfff)
-/* AD7091R_REG_CONF */
-#define AD7091R_REG_CONF_ALERT_EN BIT(4)
-#define AD7091R_REG_CONF_AUTO BIT(8)
-#define AD7091R_REG_CONF_CMD BIT(10)
-
-#define AD7091R_REG_CONF_MODE_MASK \
- (AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD)
-
const struct iio_event_spec ad7091r_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
@@ -49,34 +41,6 @@ const struct iio_event_spec ad7091r_events[] = {
};
EXPORT_SYMBOL_NS_GPL(ad7091r_events, IIO_AD7091R);
-static int ad7091r_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode)
-{
- int ret, conf;
-
- switch (mode) {
- case AD7091R_MODE_SAMPLE:
- conf = 0;
- break;
- case AD7091R_MODE_COMMAND:
- conf = AD7091R_REG_CONF_CMD;
- break;
- case AD7091R_MODE_AUTOCYCLE:
- conf = AD7091R_REG_CONF_AUTO;
- break;
- default:
- return -EINVAL;
- }
-
- ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
- AD7091R_REG_CONF_MODE_MASK, conf);
- if (ret)
- return ret;
-
- st->mode = mode;
-
- return 0;
-}
-
static int ad7091r_set_channel(struct ad7091r_state *st, unsigned int channel)
{
unsigned int dummy;
@@ -406,7 +370,7 @@ int ad7091r_probe(struct device *dev, const struct ad7091r_init_info *init_info,
}
/* Use command mode by default to convert only desired channels*/
- ret = ad7091r_set_mode(st, AD7091R_MODE_COMMAND);
+ ret = st->chip_info->set_mode(st, AD7091R_MODE_COMMAND);
if (ret)
return ret;
diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
index a57ec36491f5..7ba5065a63dd 100644
--- a/drivers/iio/adc/ad7091r-base.h
+++ b/drivers/iio/adc/ad7091r-base.h
@@ -18,7 +18,14 @@
#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5)
#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6)
+/* AD7091R_REG_CONF */
#define AD7091R_REG_CONF_INT_VREF BIT(0)
+#define AD7091R_REG_CONF_ALERT_EN BIT(4)
+#define AD7091R_REG_CONF_AUTO BIT(8)
+#define AD7091R_REG_CONF_CMD BIT(10)
+
+#define AD7091R_REG_CONF_MODE_MASK \
+ (AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD)
/* AD7091R_REG_CH_LIMIT */
#define AD7091R_HIGH_LIMIT 0xFFF
@@ -58,6 +65,7 @@ struct ad7091r_chip_info {
unsigned int num_channels;
const struct iio_chan_spec *channels;
unsigned int vref_mV;
+ int (*set_mode)(struct ad7091r_state *st, enum ad7091r_mode mode);
};
struct ad7091r_init_info {
diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c
index cb4c7865f0cc..e1163b42609c 100644
--- a/drivers/iio/adc/ad7091r5.c
+++ b/drivers/iio/adc/ad7091r5.c
@@ -26,11 +26,40 @@ static const struct iio_chan_spec ad7091r5_channels_noirq[] = {
AD7091R_CHANNEL(3, 12, NULL, 0),
};
+static int ad7091r5_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode)
+{
+ int ret, conf;
+
+ switch (mode) {
+ case AD7091R_MODE_SAMPLE:
+ conf = 0;
+ break;
+ case AD7091R_MODE_COMMAND:
+ conf = AD7091R_REG_CONF_CMD;
+ break;
+ case AD7091R_MODE_AUTOCYCLE:
+ conf = AD7091R_REG_CONF_AUTO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
+ AD7091R_REG_CONF_MODE_MASK, conf);
+ if (ret)
+ return ret;
+
+ st->mode = mode;
+
+ return 0;
+}
+
static const struct ad7091r_chip_info ad7091r5_chip_info_irq = {
.name = "ad7091r-5",
.channels = ad7091r5_channels_irq,
.num_channels = ARRAY_SIZE(ad7091r5_channels_irq),
.vref_mV = 2500,
+ .set_mode = &ad7091r5_set_mode,
};
static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = {
@@ -38,6 +67,7 @@ static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = {
.channels = ad7091r5_channels_noirq,
.num_channels = ARRAY_SIZE(ad7091r5_channels_noirq),
.vref_mV = 2500,
+ .set_mode = &ad7091r5_set_mode,
};
static const struct regmap_config ad7091r_regmap_config = {
--
2.42.0
Powered by blists - more mailing lists