Message-ID: <20231219122634.GJ1074920@black.fi.intel.com>
Date: Tue, 19 Dec 2023 14:26:34 +0200
From: Mika Westerberg <mika.westerberg@...ux.intel.com>
To: Sanath S <sanaths2@....com>
Cc: Sanath S <Sanath.S@....com>, mario.limonciello@....com,
	andreas.noever@...il.com, michael.jamet@...el.com,
	YehezkelShB@...il.com, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [Patch v2 2/2] thunderbolt: Teardown tunnels and reset
 downstream ports created by boot firmware

On Tue, Dec 19, 2023 at 02:41:08PM +0530, Sanath S wrote:
> 
> On 12/18/2023 6:48 PM, Mika Westerberg wrote:
> > On Mon, Dec 18, 2023 at 06:35:13PM +0530, Sanath S wrote:
> > > On 12/18/2023 5:53 PM, Mika Westerberg wrote:
> > > > On Mon, Dec 18, 2023 at 01:31:51PM +0200, Mika Westerberg wrote:
> > > > > On Mon, Dec 18, 2023 at 04:49:13PM +0530, Sanath S wrote:
> > > > > > > The discover part should not do anything (like write the hardware) so
> > > > > > > perhaps it is just some timing thing (but that's weird too).
> > > > > > > 
> > > > > > > I think we should do something like this:
> > > > > > > 
> > > > > > > 1. Disable all enabled protocol adapters (reset them to defaults).
> > > > > > > 2. Clear all protocol adapter paths.
> > > > > > > 3. Issue DPR over all enabled USB4 ports.
> > > > > > > 
> > > > > > > BTW, what you mean "didn't work"?
> > > > > > Path activation would go fine after DPR like below:
> > > > > > 
> > > > > > [   15.090905] thunderbolt 0000:c4:00.5: 0:5 <-> 2:9 (PCI): activating
> > > > > > [   15.090932] thunderbolt 0000:c4:00.5: activating PCIe Down path from 0:5
> > > > > > to 2:9
> > > > > > [   15.091602] thunderbolt 0000:c4:00.5: activating PCIe Up path from 2:9 to
> > > > > > 0:5
> > > > > > 
> > > > > > But, PCIE enumeration doesn't happen (pcie link up will not happen, will not
> > > > > > see below logs)
> > > > > > [   15.134223] pcieport 0000:00:03.1: pciehp: Slot(0-1): Card present
> > > > > > [   15.134243] pcieport 0000:00:03.1: pciehp: Slot(0-1): Link Up
> > > > > Okay, what if you like reset the PCIe adapter config spaces back to the
> > > > > defaults? Just as an experiment.
> > > > If this turns out to be really complex then I guess it is better to do
> > > > it like you did originally using discovery but at least it would be nice
> > > > to see what the end result of this experiment looks like :)
> I feel it's better to go with discover and then reset for now (as v3).
> I'll keep this experiment as "to do" and will send out when I crack it down.

Fair enough.

> > > Yes, I'll give a try.
> > > As an experiment, I tried to compare the path deactivation that occurs at
> > > two place.
> > > 1. In tb_switch_reset where we are calling tb_path_deactivate_hop(port, i).
> > > 2. While we get a unplug event after doing DPR.
> > > 
> > > I observed both have different hop_index and port numbers.
> > > So, are we calling tb_path_deactivate_hop with wrong hop ids ?
> > Wrong adapters possibly.
> > 
> > >  From deactivate tunnel (called while unplug) :
> > > [    3.408268] thunderbolt 0000:c4:00.5: deactivating PCIe Down path from
> > > 2:9 to 0:5
> > > [    3.408282] deactivate hop port = 9 hop_index=8
> > > [    3.408328] deactivate hop port = 2 hop_index=10
> > Definitely should be port = 5 (that's PCIe down in your log) and
> > hop_index = 8 (that's the one used with PCIe).
> > 
> > > Deactivate from tb_switch_reset() :
> > > deactivate hop port = 5 hop_index=8
> > Can you add some more logging and provide me the dmesg or
> > alternativively investigate it yourself. You can use tb_port_dbg() to
> > get the port numbers to the log.
> I've sent you complete dmesg.

Got it, thanks!

> Here is the log w.r.t port numbers and path clean up.
> 
> [    3.389038] thunderbolt 0000:c4:00.5: 0:3: Downstream port, setting DPR
> [    3.389065] Calling usb4_port_reset
> [    3.389068] thunderbolt 0000:c4:00.5: 0:4: Found USB3 DOWN
> [    3.389193] thunderbolt 0000:c4:00.5: 0:4: In reset, cleaning up path,
> port->port = 4 hopid = 8
> [    3.389203] thunderbolt 0000:c4:00.5: 0:4: deactivating_hop port = 4
> hop_index=8
> [    3.389682] thunderbolt 0000:c4:00.5: 0:5: Found PCI Down
> [    3.389811] thunderbolt 0000:c4:00.5: 0:5: In reset, cleaning up path,
> port->port = 5 hopid = 8
> [    3.389817] thunderbolt 0000:c4:00.5: 0:5: deactivating_hop port = 5
> hop_index=8
> [    3.390296] thunderbolt 0000:c4:00.5: 0:6: Found DP IN
> [    3.390555] thunderbolt 0000:c4:00.5: 0:6: In reset, cleaning up path,
> port->port = 6 hopid = 8
> [    3.390558] thunderbolt 0000:c4:00.5: 0:6: deactivating_hop port = 6
> hop_index=8
> [    3.390686] thunderbolt 0000:c4:00.5: 0:6: In reset, cleaning up path,
> port->port = 6 hopid = 9
> [    3.390689] thunderbolt 0000:c4:00.5: 0:6: deactivating_hop port = 6
> hop_index=9
> [    3.390816] thunderbolt 0000:c4:00.5: 0:7: Found DP IN
> [    3.391077] thunderbolt 0000:c4:00.5: 0:7: In reset, cleaning up path,
> port->port = 7 hopid = 8
> [    3.391080] thunderbolt 0000:c4:00.5: 0:7: deactivating_hop port = 7
> hop_index=8
> [    3.391213] thunderbolt 0000:c4:00.5: 0:7: In reset, cleaning up path,
> port->port = 7 hopid = 9
> [    3.391217] thunderbolt 0000:c4:00.5: 0:7: deactivating_hop port = 7
> hop_index=9
> [    3.391342] Reset success
> [    3.391391] thunderbolt 0000:c4:00.5: 0:2: switch unplugged
> [    3.391434] thunderbolt 0000:c4:00.5: 0:4 <-> 2:16 (USB3): deactivating
> [    3.391471] thunderbolt 0000:c4:00.5: deactivating USB3 Down path from
> 0:4 to 2:16
> [    3.391477] thunderbolt 0000:c4:00.5: 0:4: deactivating_hop port = 4
> hop_index=8
> [    3.391641] thunderbolt 0000:c4:00.5: 2:1: deactivating_hop port = 1
> hop_index=9
> [    3.391651] thunderbolt 0000:c4:00.5: deactivating USB3 Up path from 2:16
> to 0:4
> [    3.391659] thunderbolt 0000:c4:00.5: 2:16: deactivating_hop port = 16
> hop_index=8
> [    3.391664] thunderbolt 0000:c4:00.5: 0:2: deactivating_hop port = 2
> hop_index=9
> [    3.391701] thunderbolt 0000:c4:00.6: total paths: 3
> [    3.391720] thunderbolt 0000:c4:00.6: IOMMU DMA protection is disabled
> [    3.392027] thunderbolt 0000:c4:00.5: 0:5 <-> 2:9 (PCI): deactivating
> [    3.392154] thunderbolt 0000:c4:00.5: deactivating PCIe Down path from
> 2:9 to 0:5
> [    3.392163] thunderbolt 0000:c4:00.5: 2:9: deactivating_hop port = 9
> hop_index=8
> [    3.392170] thunderbolt 0000:c4:00.5: 0:2: deactivating_hop port = 2
> hop_index=10
> [    3.392534] thunderbolt 0000:c4:00.5: deactivating PCIe Up path from 0:5
> to 2:9
> [    3.392539] thunderbolt 0000:c4:00.5: 0:5: deactivating_hop port = 5
> hop_index=8
> [    3.392637] thunderbolt 0000:c4:00.5: 2:1: deactivating_hop port = 1
> hop_index=10
> [    3.392799] thunderbolt 0-2: device disconnected
> 
> But it seems like we are not cleaning up all the paths ?

To me this looks correct and even your dmesg the PCIe tunnel that gets
established after the "reset" seems to be working just fine. I also see
that in your log you are doing the discovery before reset even though
the original idea was to avoid it.

In any case this was a good experiment. I will see if I can get this
working on my side if I have some spare time during holidays.

I guess we can to with the discovery but taking into account the
"host_reset".

One additional question though, say we have PCIe tunnel established by
the BIOS CM and we do the "reset", that means there will be hot-remove
on the PCIe side and then hotplug again, does this slow down the boot
considerably? We have some delays there in the PCIe code that might hit
us here although I agree that we definitely prefer working system rather
than fast-booting non-working system but perhaps the delays are not
noticeable by the end-user?

Powered by blists - more mailing lists