| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231220-thunderbolt-pci-patch-4-v3-1-056fd1717d06@chromium.org>
Date: Wed, 20 Dec 2023 15:28:32 -0500
From: Esther Shimanovich <eshimanovich@...omium.org>
To: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
Rajat Jain <rajatja@...gle.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Esther Shimanovich <eshimanovich@...omium.org>
Subject: [PATCH v3] PCI: Relabel JHL6540 on Lenovo X1 Carbon 7,8
On Lenovo X1 Carbon Gen 7/8 devices, when a platform enables a policy to
distrust removable PCI devices, the build-in USB-C ports stop working at
all.
This happens because these X1 Carbon models have a unique feature; a
Thunderbolt controller that is discrete from the SoC. The software sees
this controller, and incorrectly assumes it is a removable PCI device,
even though it is fixed to the computer and is wired to the computer's
own USB-C ports.
Relabel all the components of the JHL6540 controller as DEVICE_FIXED,
and where applicable, external_facing.
Ensure that the security policy to distrust external PCI devices works
as intended, and that the device's USB-C ports are able to enumerate
even when the policy is enabled.
Signed-off-by: Esther Shimanovich <eshimanovich@...omium.org>
---
Changes in v3:
- removed redundant dmi check, as the subsystem vendor check is
sufficient
- switched to PCI_VENDOR_ID_LENOVO instead of hex code
- Link to v2: https://lore.kernel.org/r/20231219-thunderbolt-pci-patch-4-v2-1-ec2d7af45a9b@chromium.org
Changes in v2:
- nothing new, v1 was just a test run to see if the ASCII diagram would
be rendered properly in mutt and k-9
- for folks using gmail, make sure to select "show original" on the top
right, as otherwise the diagram will be garbled by the standard
non-monospace font
- Link to v1: https://lore.kernel.org/r/20231219-thunderbolt-pci-patch-4-v1-1-4e8e3773f0a9@chromium.org
---
drivers/pci/quirks.c | 106 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 106 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ea476252280a..3e6e5fa94d99 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3873,6 +3873,112 @@ DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL,
quirk_apple_poweroff_thunderbolt);
#endif
+/*
+ * On most ThinkPad Carbon 7/8s, JHL6540 Thunderbolt 3 bridges are set
+ * incorrectly as DEVICE_REMOVABLE despite being built into the device.
+ * This is the side effect of a unique hardware configuration.
+ *
+ * Normally, Thunderbolt functionality is integrated to the SoC and
+ * its root ports.
+ *
+ * Most devices:
+ * root port --> USB-C port
+ *
+ * But X1 Carbon Gen 7/8 uses Whiskey Lake and Comet Lake SoC, which
+ * don't come with Thunderbolt functionality. Therefore, a discrete
+ * Thunderbolt Host PCI controller was added between the root port and
+ * the USB-C port.
+ *
+ * Thinkpad Carbon 7/8s
+ * (w/ Whiskey Lake and Comet Lake SoC):
+ * root port --> JHL6540 --> USB-C port
+ *
+ * Because the root port is labeled by FW as "ExternalFacingPort", as
+ * required by the DMAR ACPI spec, the JHL6540 chip is inaccurately
+ * labeled as DEVICE_REMOVABLE by the kernel pci driver.
+ * Therefore, the built-in USB-C ports do not enumerate when policies
+ * forbidding external pci devices are enforced.
+ *
+ * This fix relabels the pci components in the built-in JHL6540 chip as
+ * DEVICE_FIXED, ensuring that the built-in USB-C ports always enumerate
+ * properly as intended.
+ *
+ * This fix also labels the external facing components of the JHL6540 as
+ * external_facing, so that the pci attach policy works as intended.
+ *
+ * The ASCII diagram below describes the pci layout of the JHL6540 chip.
+ *
+ * Root Port
+ * [8086:02b4] or [8086:9db4]
+ * |
+ * JHL6540 Chip
+ * __________________________________________________
+ * | Bridge |
+ * | PCI ID -> [8086:15d3] |
+ * | DEVFN -> (00) |
+ * | _________________|__________________ |
+ * | | | | | |
+ * | Bridge Bridge Bridge Bridge |
+ * | [8086:15d3] [8086:15d3] [8086:15d3] [8086:15d3] |
+ * | (00) (08) (10) (20) |
+ * | | | | | |
+ * | NHI | USB Controller | |
+ * | [8086:15d2] | [8086:15d4] | |
+ * | (00) | (00) | |
+ * | |___________| |___________| |
+ * |____________|________________________|____________|
+ * | |
+ * USB-C Port USB-C Port
+ *
+ *
+ * Based on what a JHL6549 pci component's pci id, subsystem device id
+ * and devfn are, we can infer if it is fixed and if it faces a usb port;
+ * which would mean it is external facing.
+ * This quirk uses these values to identify the pci components and set the
+ * properties accordingly.
+ */
+static void carbon_X1_fixup_relabel_alpine_ridge(struct pci_dev *dev)
+{
+ /* Is this JHL6540 PCI component embedded in a Lenovo device? */
+ if (dev->subsystem_vendor != PCI_VENDOR_ID_LENOVO)
+ return;
+
+ /* Is this JHL6540 PCI component embedded in an X1 Carbon Gen 7/8? */
+ if (dev->subsystem_device != 0x22be && // Gen 8
+ dev->subsystem_device != 0x2292) { // Gen 7
+ return;
+ }
+
+ dev_set_removable(&dev->dev, DEVICE_FIXED);
+
+ /* Not all 0x15d3 components are external facing */
+ if (dev->device == 0x15d3 &&
+ dev->devfn != 0x08 &&
+ dev->devfn != 0x20) {
+ return;
+ }
+
+ dev->external_facing = true;
+}
+
+/*
+ * We also need to relabel the root port as a consequence of changing
+ * the JHL6540's PCIE hierarchy.
+ */
+static void carbon_X1_fixup_rootport_not_removable(struct pci_dev *dev)
+{
+ if (!dmi_match(DMI_PRODUCT_FAMILY, "ThinkPad X1 Carbon 7th") &&
+ !dmi_match(DMI_PRODUCT_FAMILY, "ThinkPad X1 Carbon Gen 8"))
+ return;
+
+ dev->external_facing = false;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x15d3, carbon_X1_fixup_relabel_alpine_ridge);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x15d2, carbon_X1_fixup_relabel_alpine_ridge);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x15d4, carbon_X1_fixup_relabel_alpine_ridge);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x02b4, carbon_X1_fixup_rootport_not_removable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x9db4, carbon_X1_fixup_rootport_not_removable);
+
/*
* Following are device-specific reset methods which can be used to
* reset a single function if other methods (e.g. FLR, PM D0->D3) are
---
base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
change-id: 20231219-thunderbolt-pci-patch-4-ede71cb833c4
Best regards,
--
Esther Shimanovich <eshimanovich@...omium.org>
Powered by blists - more mailing lists