[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231220022901.29158-1-xiongxin@kylinos.cn>
Date: Wed, 20 Dec 2023 10:29:01 +0800
From: xiongxin <xiongxin@...inos.cn>
To: fancer.lancer@...il.com,
hoan@...amperecomputing.com,
linus.walleij@...aro.org,
brgl@...ev.pl,
andy@...nel.org
Cc: linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org,
xiongxin <xiongxin@...inos.cn>,
stable@...nel.org,
Riwen Lu <luriwen@...inos.cn>
Subject: [PATCH v5] gpio: dwapb: mask/unmask IRQ when disable/enale it
In the hardware implementation of the I2C HID driver based on DesignWare
GPIO IRQ chip, when the user continues to use the I2C HID device in the
suspend process, the I2C HID interrupt will be masked after the resume
process is finished.
This is because the disable_irq()/enable_irq() of the DesignWare GPIO
driver does not synchronize the IRQ mask register state. In normal use
of the I2C HID procedure, the GPIO IRQ irq_mask()/irq_unmask() functions
are called in pairs. In case of an exception, i2c_hid_core_suspend()
calls disable_irq() to disable the GPIO IRQ. With low probability, this
causes irq_unmask() to not be called, which causes the GPIO IRQ to be
masked and not unmasked in enable_irq(), raising an exception.
Add synchronization to the masked register state in the
dwapb_irq_enable()/dwapb_irq_disable() function. mask the GPIO IRQ
before disabling it. After enabling the GPIO IRQ, unmask the IRQ.
Fixes: 7779b3455697 ("gpio: add a driver for the Synopsys DesignWare APB GPIO block")
Cc: stable@...nel.org
Co-developed-by: Riwen Lu <luriwen@...inos.cn>
Signed-off-by: Riwen Lu <luriwen@...inos.cn>
Signed-off-by: xiongxin <xiongxin@...inos.cn>
Acked-by: Serge Semin <fancer.lancer@...il.com>
Reviewed-by: Andy Shevchenko <andy@...nel.org>
---
v5:
* fix typo in patch description
v4:
* Add patch tag information
v3:
* Modify the submitter's information
v2:
* Resubmit the patch to fix this exception from the DesignWare
GPIO driver side
v1:
* Resolve the exception from the IRQ core layer. (key point not
found correctly)
---
drivers/gpio/gpio-dwapb.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 4a4f61bf6c58..8c59332429c2 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -282,13 +282,15 @@ static void dwapb_irq_enable(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
unsigned long flags;
u32 val;
raw_spin_lock_irqsave(&gc->bgpio_lock, flags);
- val = dwapb_read(gpio, GPIO_INTEN);
- val |= BIT(irqd_to_hwirq(d));
+ val = dwapb_read(gpio, GPIO_INTEN) | BIT(hwirq);
dwapb_write(gpio, GPIO_INTEN, val);
+ val = dwapb_read(gpio, GPIO_INTMASK) & ~BIT(hwirq);
+ dwapb_write(gpio, GPIO_INTMASK, val);
raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags);
}
@@ -296,12 +298,14 @@ static void dwapb_irq_disable(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
unsigned long flags;
u32 val;
raw_spin_lock_irqsave(&gc->bgpio_lock, flags);
- val = dwapb_read(gpio, GPIO_INTEN);
- val &= ~BIT(irqd_to_hwirq(d));
+ val = dwapb_read(gpio, GPIO_INTMASK) | BIT(hwirq);
+ dwapb_write(gpio, GPIO_INTMASK, val);
+ val = dwapb_read(gpio, GPIO_INTEN) & ~BIT(hwirq);
dwapb_write(gpio, GPIO_INTEN, val);
raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags);
}
--
2.34.1
Powered by blists - more mailing lists