Message-ID: <ZYJkTN+GNi1nMkJd@sunil-laptop>
Date: Wed, 20 Dec 2023 09:19:32 +0530
From: Sunil V L <sunilvl@...tanamicro.com>
To: "Rafael J. Wysocki" <rafael@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linux-riscv@...ts.infradead.org, linux-acpi@...r.kernel.org,
	linux-pci@...r.kernel.org,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will@...nel.org>,
	Paul Walmsley <paul.walmsley@...ive.com>,
	Palmer Dabbelt <palmer@...belt.com>,
	Albert Ou <aou@...s.berkeley.edu>, Len Brown <lenb@...nel.org>,
	Anup Patel <anup@...infault.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	Bjorn Helgaas <bhelgaas@...gle.com>, Haibo Xu <haibo1.xu@...el.com>,
	Conor Dooley <conor.dooley@...rochip.com>,
	Andrew Jones <ajones@...tanamicro.com>,
	Björn Töpel <bjorn@...nel.org>,
	Marc Zyngier <maz@...nel.org>
Subject: Re: [RFC PATCH v3 00/17] RISC-V: ACPI: Add external interrupt
 controller support

On Tue, Dec 19, 2023 at 06:50:19PM +0100, Rafael J. Wysocki wrote:
> On Tue, Dec 19, 2023 at 6:45 PM Sunil V L <sunilvl@...tanamicro.com> wrote:
> >
> > This series adds support for the below ECR approved by ASWG.
> > 1) MADT - https://drive.google.com/file/d/1oMGPyOD58JaPgMl1pKasT-VKsIKia7zR/view?usp=sharing
> >
> > The series primarily enables irqchip drivers for RISC-V ACPI based
> > platforms.
> >
> > The series can be broadly categorized like below.
> >
> > 1) PCI ACPI related functions are migrated from arm64 to common file so
> > that we don't need to duplicate them for RISC-V.
> >
> > 2) Introduced support for fw_devlink for ACPI nodes for IRQ dependency.
> > This helps to support deferred probe of interrupt controller drivers.
> >
> > 3) Modified pnp_irq() to try registering the IRQ  again if it sees it in
> > disabled state. This solution is similar to how
> > platform_get_irq_optional() works for regular platform devices.
> >
> > 4) Added support for re-ordering the probe of interrupt controllers when
> > IRQCHIP_ACPI_DECLARE is used.
> >
> > 5) ACPI support added in RISC-V interrupt controller drivers.
> >
> > This series is based on Anup's AIA v11 series. Since Anup's AIA v11 is
> > not merged yet and first time introducing fw_devlink, deferred probe and
> > reordering support for IRQCHIP probe, this series is still kept as RFC.
> > Looking forward for the feedback!
> >
> > Changes since RFC v2:
> >         1) Introduced fw_devlink for ACPI nodes for IRQ dependency.
> >         2) Dropped patches in drivers which are not required due to
> >            fw_devlink support.
> >         3) Dropped pci_set_msi() patch and added a patch in
> >            pci_create_root_bus().
> >         4) Updated pnp_irq() patch so that none of the actual PNP
> >            drivers need to change.
> >
> > Changes since RFC v1:
> >         1) Abandoned swnode approach as per Marc's feedback.
> >         2) To cope up with AIA series changes which changed irqchip driver
> >            probe from core_initcall() to platform_driver, added patches
> >            to support deferred probing.
> >         3) Rebased on top of Anup's AIA v11 and added tags.
> >
> > To test the series,
> >
> > 1) Qemu should be built using the riscv_acpi_b2_v8 branch at
> > https://github.com/vlsunil/qemu.git
> >
> > 2) EDK2 should be built using the instructions at:
> > https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md
> >
> > 3) Build Linux using this series on top of Anup's AIA v11 series.
> >
> > Run Qemu:
> > qemu-system-riscv64 \
> >  -M virt,pflash0=pflash0,pflash1=pflash1,aia=aplic-imsic \
> >  -m 2G -smp 8 \
> >  -serial mon:stdio \
> >  -device virtio-gpu-pci -full-screen \
> >  -device qemu-xhci \
> >  -device usb-kbd \
> >  -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \
> >  -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \
> >  -netdev user,id=net0 -device virtio-net-pci,netdev=net0 \
> >  -kernel arch/riscv/boot/Image \
> >  -initrd rootfs.cpio \
> >  -append "root=/dev/ram ro console=ttyS0 rootwait earlycon=uart8250,mmio,0x10000000"
> >
> > To boot with APLIC only, use aia=aplic.
> > To boot with PLIC, remove aia= option.
> >
> > This series is also available in acpi_b2_v3_riscv_aia_v11 branch at
> > https://github.com/vlsunil/linux.git
> >
> > Based-on: 20231023172800.315343-1-apatel@...tanamicro.com
> > (https://lore.kernel.org/lkml/20231023172800.315343-1-apatel@ventanamicro.com/)
> >
> > Sunil V L (17):
> >   arm64: PCI: Migrate ACPI related functions to pci-acpi.c
> >   RISC-V: ACPI: Implement PCI related functionality
> >   PCI: Make pci_create_root_bus() declare its reliance on MSI domains
> >   ACPI: Add fw_devlink support for ACPI fwnode for IRQ dependency
> >   ACPI: irq: Add support for deferred probe in acpi_register_gsi()
> >   pnp.h: Reconfigure IRQ in pnp_irq() to support deferred probe
> >   ACPI: scan.c: Add weak arch specific function to reorder the IRQCHIP
> >     probe
> >   ACPI: RISC-V: Implement arch function to reorder irqchip probe entries
> >   irqchip: riscv-intc: Add ACPI support for AIA
> >   irqchip: riscv-imsic: Add ACPI support
> >   irqchip: riscv-aplic: Add ACPI support
> >   irqchip: irq-sifive-plic: Add ACPI support
> >   ACPI: bus: Add RINTC IRQ model for RISC-V
> >   ACPI: bus: Add acpi_riscv_init function
> >   ACPI: RISC-V: Create APLIC platform device
> >   ACPI: RISC-V: Create PLIC platform device
> >   irqchip: riscv-intc: Set ACPI irqmodel
> 
> JFYI, I have no capacity to provide any feedback on this till 6.8-rc1 is out.
> 
No worries!. I will wait for your feedback.

Thanks!
Sunil

Powered by blists - more mailing lists