Message-ID: <ace9ca55-1515-4ba3-b35e-7acad32e1f1a@arm.com>
Date: Wed, 20 Dec 2023 13:02:27 +0000
From: Ryan Roberts <ryan.roberts@....com>
To: David Hildenbrand <david@...hat.com>,
 Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>,
 Ard Biesheuvel <ardb@...nel.org>, Marc Zyngier <maz@...nel.org>,
 Oliver Upton <oliver.upton@...ux.dev>, James Morse <james.morse@....com>,
 Suzuki K Poulose <suzuki.poulose@....com>, Zenghui Yu
 <yuzenghui@...wei.com>, Andrey Ryabinin <ryabinin.a.a@...il.com>,
 Alexander Potapenko <glider@...gle.com>,
 Andrey Konovalov <andreyknvl@...il.com>, Dmitry Vyukov <dvyukov@...gle.com>,
 Vincenzo Frascino <vincenzo.frascino@....com>,
 Andrew Morton <akpm@...ux-foundation.org>,
 Anshuman Khandual <anshuman.khandual@....com>,
 Matthew Wilcox <willy@...radead.org>, Yu Zhao <yuzhao@...gle.com>,
 Mark Rutland <mark.rutland@....com>, Kefeng Wang
 <wangkefeng.wang@...wei.com>, John Hubbard <jhubbard@...dia.com>,
 Zi Yan <ziy@...dia.com>, Barry Song <21cnbao@...il.com>,
 Alistair Popple <apopple@...dia.com>, Yang Shi <shy828301@...il.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-mm@...ck.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 02/16] mm: Batch-copy PTE ranges during fork()

On 20/12/2023 12:54, David Hildenbrand wrote:
> On 20.12.23 13:04, Ryan Roberts wrote:
>> On 20/12/2023 11:58, David Hildenbrand wrote:
>>> On 20.12.23 12:51, Ryan Roberts wrote:
>>>> On 20/12/2023 11:36, David Hildenbrand wrote:
>>>>> On 20.12.23 12:28, Ryan Roberts wrote:
>>>>>> On 20/12/2023 10:56, David Hildenbrand wrote:
>>>>>>> On 20.12.23 11:41, Ryan Roberts wrote:
>>>>>>>> On 20/12/2023 10:16, David Hildenbrand wrote:
>>>>>>>>> On 20.12.23 11:11, Ryan Roberts wrote:
>>>>>>>>>> On 20/12/2023 09:54, David Hildenbrand wrote:
>>>>>>>>>>> On 20.12.23 10:51, Ryan Roberts wrote:
>>>>>>>>>>>> On 20/12/2023 09:17, David Hildenbrand wrote:
>>>>>>>>>>>>> On 19.12.23 18:42, Ryan Roberts wrote:
>>>>>>>>>>>>>> On 19/12/2023 17:22, David Hildenbrand wrote:
>>>>>>>>>>>>>>> On 19.12.23 09:30, Ryan Roberts wrote:
>>>>>>>>>>>>>>>> On 18/12/2023 17:47, David Hildenbrand wrote:
>>>>>>>>>>>>>>>>> On 18.12.23 11:50, Ryan Roberts wrote:
>>>>>>>>>>>>>>>>>> Convert copy_pte_range() to copy a batch of ptes in one go. A
>>>>>>>>>>>>>>>>>> given
>>>>>>>>>>>>>>>>>> batch is determined by the architecture with the new helper,
>>>>>>>>>>>>>>>>>> pte_batch_remaining(), and maps a physically contiguous block of
>>>>>>>>>>>>>>>>>> memory,
>>>>>>>>>>>>>>>>>> all belonging to the same folio. A pte batch is then
>>>>>>>>>>>>>>>>>> write-protected in
>>>>>>>>>>>>>>>>>> one go in the parent using the new helper, ptep_set_wrprotects()
>>>>>>>>>>>>>>>>>> and is
>>>>>>>>>>>>>>>>>> set in one go in the child using the new helper, set_ptes_full().
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> The primary motivation for this change is to reduce the number
>>>>>>>>>>>>>>>>>> of tlb
>>>>>>>>>>>>>>>>>> maintenance operations that the arm64 backend has to perform
>>>>>>>>>>>>>>>>>> during
>>>>>>>>>>>>>>>>>> fork, as it is about to add transparent support for the
>>>>>>>>>>>>>>>>>> "contiguous
>>>>>>>>>>>>>>>>>> bit"
>>>>>>>>>>>>>>>>>> in its ptes. By write-protecting the parent using the new
>>>>>>>>>>>>>>>>>> ptep_set_wrprotects() (note the 's' at the end) function, the
>>>>>>>>>>>>>>>>>> backend
>>>>>>>>>>>>>>>>>> can avoid having to unfold contig ranges of PTEs, which is
>>>>>>>>>>>>>>>>>> expensive,
>>>>>>>>>>>>>>>>>> when all ptes in the range are being write-protected.
>>>>>>>>>>>>>>>>>> Similarly, by
>>>>>>>>>>>>>>>>>> using set_ptes_full() rather than set_pte_at() to set up ptes in
>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>> child, the backend does not need to fold a contiguous range once
>>>>>>>>>>>>>>>>>> they
>>>>>>>>>>>>>>>>>> are all populated - they can be initially populated as a
>>>>>>>>>>>>>>>>>> contiguous
>>>>>>>>>>>>>>>>>> range in the first place.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> This code is very performance sensitive, and a significant
>>>>>>>>>>>>>>>>>> amount of
>>>>>>>>>>>>>>>>>> effort has been put into not regressing performance for the
>>>>>>>>>>>>>>>>>> order-0
>>>>>>>>>>>>>>>>>> folio case. By default, pte_batch_remaining() is compile
>>>>>>>>>>>>>>>>>> constant 1,
>>>>>>>>>>>>>>>>>> which enables the compiler to simplify the extra loops that are
>>>>>>>>>>>>>>>>>> added
>>>>>>>>>>>>>>>>>> for batching and produce code that is equivalent (and equally
>>>>>>>>>>>>>>>>>> performant) as the previous implementation.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> This change addresses the core-mm refactoring only and a separate
>>>>>>>>>>>>>>>>>> change
>>>>>>>>>>>>>>>>>> will implement pte_batch_remaining(), ptep_set_wrprotects() and
>>>>>>>>>>>>>>>>>> set_ptes_full() in the arm64 backend to realize the performance
>>>>>>>>>>>>>>>>>> improvement as part of the work to enable contpte mappings.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> To ensure the arm64 is performant once implemented, this
>>>>>>>>>>>>>>>>>> change is
>>>>>>>>>>>>>>>>>> very
>>>>>>>>>>>>>>>>>> careful to only call ptep_get() once per pte batch.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> The following microbenchmark results demonstate that there is no
>>>>>>>>>>>>>>>>>> significant performance change after this patch. Fork is called
>>>>>>>>>>>>>>>>>> in a
>>>>>>>>>>>>>>>>>> tight loop in a process with 1G of populated memory and the time
>>>>>>>>>>>>>>>>>> for
>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>> function to execute is measured. 100 iterations per run, 8 runs
>>>>>>>>>>>>>>>>>> performed on both Apple M2 (VM) and Ampere Altra (bare metal).
>>>>>>>>>>>>>>>>>> Tests
>>>>>>>>>>>>>>>>>> performed for case where 1G memory is comprised of order-0
>>>>>>>>>>>>>>>>>> folios and
>>>>>>>>>>>>>>>>>> case where comprised of pte-mapped order-9 folios. Negative is
>>>>>>>>>>>>>>>>>> faster,
>>>>>>>>>>>>>>>>>> positive is slower, compared to baseline upon which the series is
>>>>>>>>>>>>>>>>>> based:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> | Apple M2 VM   | order-0 (pte-map) | order-9 (pte-map) |
>>>>>>>>>>>>>>>>>> | fork          |-------------------|-------------------|
>>>>>>>>>>>>>>>>>> | microbench    |    mean |   stdev |    mean |   stdev |
>>>>>>>>>>>>>>>>>> |---------------|---------|---------|---------|---------|
>>>>>>>>>>>>>>>>>> | baseline      |    0.0% |    1.1% |    0.0% |    1.2% |
>>>>>>>>>>>>>>>>>> | after-change  |   -1.0% |    2.0% |   -0.1% |    1.1% |
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> | Ampere Altra  | order-0 (pte-map) | order-9 (pte-map) |
>>>>>>>>>>>>>>>>>> | fork          |-------------------|-------------------|
>>>>>>>>>>>>>>>>>> | microbench    |    mean |   stdev |    mean |   stdev |
>>>>>>>>>>>>>>>>>> |---------------|---------|---------|---------|---------|
>>>>>>>>>>>>>>>>>> | baseline      |    0.0% |    1.0% |    0.0% |    0.1% |
>>>>>>>>>>>>>>>>>> | after-change  |   -0.1% |    1.2% |   -0.1% |    0.1% |
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Tested-by: John Hubbard <jhubbard@...dia.com>
>>>>>>>>>>>>>>>>>> Reviewed-by: Alistair Popple <apopple@...dia.com>
>>>>>>>>>>>>>>>>>> Signed-off-by: Ryan Roberts <ryan.roberts@....com>
>>>>>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>>>>>           include/linux/pgtable.h | 80
>>>>>>>>>>>>>>>>>> +++++++++++++++++++++++++++++++++++
>>>>>>>>>>>>>>>>>>           mm/memory.c             | 92
>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++---------------
>>>>>>>>>>>>>>>>>>           2 files changed, 139 insertions(+), 33 deletions(-)
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h
>>>>>>>>>>>>>>>>>> index af7639c3b0a3..db93fb81465a 100644
>>>>>>>>>>>>>>>>>> --- a/include/linux/pgtable.h
>>>>>>>>>>>>>>>>>> +++ b/include/linux/pgtable.h
>>>>>>>>>>>>>>>>>> @@ -205,6 +205,27 @@ static inline int pmd_young(pmd_t pmd)
>>>>>>>>>>>>>>>>>>           #define arch_flush_lazy_mmu_mode()    do {} while (0)
>>>>>>>>>>>>>>>>>>           #endif
>>>>>>>>>>>>>>>>>>           +#ifndef pte_batch_remaining
>>>>>>>>>>>>>>>>>> +/**
>>>>>>>>>>>>>>>>>> + * pte_batch_remaining - Number of pages from addr to next batch
>>>>>>>>>>>>>>>>>> boundary.
>>>>>>>>>>>>>>>>>> + * @pte: Page table entry for the first page.
>>>>>>>>>>>>>>>>>> + * @addr: Address of the first page.
>>>>>>>>>>>>>>>>>> + * @end: Batch ceiling (e.g. end of vma).
>>>>>>>>>>>>>>>>>> + *
>>>>>>>>>>>>>>>>>> + * Some architectures (arm64) can efficiently modify a
>>>>>>>>>>>>>>>>>> contiguous
>>>>>>>>>>>>>>>>>> batch of
>>>>>>>>>>>>>>>>>> ptes.
>>>>>>>>>>>>>>>>>> + * In such cases, this function returns the remaining number of
>>>>>>>>>>>>>>>>>> pages to
>>>>>>>>>>>>>>>>>> the end
>>>>>>>>>>>>>>>>>> + * of the current batch, as defined by addr. This can be useful
>>>>>>>>>>>>>>>>>> when
>>>>>>>>>>>>>>>>>> iterating
>>>>>>>>>>>>>>>>>> + * over ptes.
>>>>>>>>>>>>>>>>>> + *
>>>>>>>>>>>>>>>>>> + * May be overridden by the architecture, else batch size is
>>>>>>>>>>>>>>>>>> always 1.
>>>>>>>>>>>>>>>>>> + */
>>>>>>>>>>>>>>>>>> +static inline unsigned int pte_batch_remaining(pte_t pte,
>>>>>>>>>>>>>>>>>> unsigned
>>>>>>>>>>>>>>>>>> long
>>>>>>>>>>>>>>>>>> addr,
>>>>>>>>>>>>>>>>>> +                        unsigned long end)
>>>>>>>>>>>>>>>>>> +{
>>>>>>>>>>>>>>>>>> +    return 1;
>>>>>>>>>>>>>>>>>> +}
>>>>>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> It's a shame we now lose the optimization for all other
>>>>>>>>>>>>>>>>> archtiectures.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Was there no way to have some basic batching mechanism that
>>>>>>>>>>>>>>>>> doesn't
>>>>>>>>>>>>>>>>> require
>>>>>>>>>>>>>>>>> arch
>>>>>>>>>>>>>>>>> specifics?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I tried a bunch of things but ultimately the way I've done it
>>>>>>>>>>>>>>>> was the
>>>>>>>>>>>>>>>> only
>>>>>>>>>>>>>>>> way
>>>>>>>>>>>>>>>> to reduce the order-0 fork regression to 0.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> My original v3 posting was costing 5% extra and even my first
>>>>>>>>>>>>>>>> attempt
>>>>>>>>>>>>>>>> at an
>>>>>>>>>>>>>>>> arch-specific version that didn't resolve to a compile-time
>>>>>>>>>>>>>>>> constant 1
>>>>>>>>>>>>>>>> still
>>>>>>>>>>>>>>>> cost an extra 3%.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I'd have thought that something very basic would have worked like:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> * Check if PTE is the same when setting the PFN to 0.
>>>>>>>>>>>>>>>>> * Check that PFN is consecutive
>>>>>>>>>>>>>>>>> * Check that all PFNs belong to the same folio
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I haven't tried this exact approach, but I'd be surprised if I can
>>>>>>>>>>>>>>>> get
>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>> regression under 4% with this. Further along the series I spent a
>>>>>>>>>>>>>>>> lot of
>>>>>>>>>>>>>>>> time
>>>>>>>>>>>>>>>> having to fiddle with the arm64 implementation; every
>>>>>>>>>>>>>>>> conditional and
>>>>>>>>>>>>>>>> every
>>>>>>>>>>>>>>>> memory read (even when in cache) was a problem. There is just so
>>>>>>>>>>>>>>>> little in
>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>> inner loop that every instruction matters. (At least on Ampere
>>>>>>>>>>>>>>>> Altra
>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>> Apple
>>>>>>>>>>>>>>>> M2).
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Of course if you're willing to pay that 4-5% for order-0 then the
>>>>>>>>>>>>>>>> benefit to
>>>>>>>>>>>>>>>> order-9 is around 10% in my measurements. Personally though, I'd
>>>>>>>>>>>>>>>> prefer to
>>>>>>>>>>>>>>>> play
>>>>>>>>>>>>>>>> safe and ensure the common order-0 case doesn't regress, as you
>>>>>>>>>>>>>>>> previously
>>>>>>>>>>>>>>>> suggested.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I just hacked something up, on top of my beloved rmap
>>>>>>>>>>>>>>> cleanup/batching
>>>>>>>>>>>>>>> series. I
>>>>>>>>>>>>>>> implemented very generic and simple batching for large folios
>>>>>>>>>>>>>>> (all PTE
>>>>>>>>>>>>>>> bits
>>>>>>>>>>>>>>> except the PFN have to match).
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Some very quick testing (don't trust each last % ) on Intel(R)
>>>>>>>>>>>>>>> Xeon(R)
>>>>>>>>>>>>>>> Silver
>>>>>>>>>>>>>>> 4210R CPU.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> order-0: 0.014210 -> 0.013969
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -> Around 1.7 % faster
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> order-9: 0.014373 -> 0.009149
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -> Around 36.3 % faster
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Well I guess that shows me :)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'll do a review and run the tests on my HW to see if it concurs.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> I pushed a simple compile fixup (we need pte_next_pfn()).
>>>>>>>>>>>>
>>>>>>>>>>>> I've just been trying to compile and noticed this. Will take a look at
>>>>>>>>>>>> your
>>>>>>>>>>>> update.
>>>>>>>>>>>>
>>>>>>>>>>>> But upon review, I've noticed the part that I think makes this
>>>>>>>>>>>> difficult
>>>>>>>>>>>> for
>>>>>>>>>>>> arm64 with the contpte optimization; You are calling ptep_get() for
>>>>>>>>>>>> every
>>>>>>>>>>>> pte in
>>>>>>>>>>>> the batch. While this is functionally correct, once arm64 has the
>>>>>>>>>>>> contpte
>>>>>>>>>>>> changes, its ptep_get() has to read every pte in the contpte block in
>>>>>>>>>>>> order to
>>>>>>>>>>>> gather the access and dirty bits. So if your batching function ends up
>>>>>>>>>>>> wealking
>>>>>>>>>>>> a 16 entry contpte block, that will cause 16 x 16 reads, which kills
>>>>>>>>>>>> performance. That's why I added the arch-specific pte_batch_remaining()
>>>>>>>>>>>> function; this allows the core-mm to skip to the end of the contpte
>>>>>>>>>>>> block and
>>>>>>>>>>>> avoid ptep_get() for the 15 tail ptes. So we end up with 16
>>>>>>>>>>>> READ_ONCE()s
>>>>>>>>>>>> instead
>>>>>>>>>>>> of 256.
>>>>>>>>>>>>
>>>>>>>>>>>> I considered making a ptep_get_noyoungdirty() variant, which would
>>>>>>>>>>>> avoid
>>>>>>>>>>>> the
>>>>>>>>>>>> bit
>>>>>>>>>>>> gathering. But we have a similar problem in zap_pte_range() and that
>>>>>>>>>>>> function
>>>>>>>>>>>> needs the dirty bit to update the folio. So it doesn't work there. (see
>>>>>>>>>>>> patch 3
>>>>>>>>>>>> in my series).
>>>>>>>>>>>>
>>>>>>>>>>>> I guess you are going to say that we should combine both approaches, so
>>>>>>>>>>>> that
>>>>>>>>>>>> your batching loop can skip forward an arch-provided number of ptes?
>>>>>>>>>>>> That
>>>>>>>>>>>> would
>>>>>>>>>>>> certainly work, but feels like an orthogonal change to what I'm
>>>>>>>>>>>> trying to
>>>>>>>>>>>> achieve :). Anyway, I'll spend some time playing with it today.
>>>>>>>>>>>
>>>>>>>>>>> You can overwrite the function or add special-casing internally, yes.
>>>>>>>>>>>
>>>>>>>>>>> Right now, your patch is called "mm: Batch-copy PTE ranges during
>>>>>>>>>>> fork()"
>>>>>>>>>>> and it
>>>>>>>>>>> doesn't do any of that besides preparing for some arm64 work.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Well it allows an arch to opt-in to batching. But I see your point.
>>>>>>>>>>
>>>>>>>>>> How do you want to handle your patches? Do you want to clean them up and
>>>>>>>>>> I'll
>>>>>>>>>> base my stuff on top? Or do you want me to take them and sort it all out?
>>>>>>>>>
>>>>>>>>> Whatever you prefer, it was mostly a quick prototype to see if we can
>>>>>>>>> achieve
>>>>>>>>> decent performance.
>>>>>>>>
>>>>>>>> I'm about to run it on Altra and M2. But I assume it will show similar
>>>>>>>> results.
>>>>>>
>>>>>> OK results in, not looking great, which aligns with my previous experience.
>>>>>> That
>>>>>> said, I'm seeing some "BUG: Bad page state in process gmain  pfn:12a094" so
>>>>>> perhaps these results are not valid...
>>>>>
>>>>> I didn't see that so far on x86, maybe related to the PFN fixup?
>>>>
>>>> All I've done is define PFN_PTE_SHIFT for arm64 on top of your latest patch:
>>>>
>>>> diff --git a/arch/arm64/include/asm/pgtable.h
>>>> b/arch/arm64/include/asm/pgtable.h
>>>> index b19a8aee684c..9eb0fd693df9 100644
>>>> --- a/arch/arm64/include/asm/pgtable.h
>>>> +++ b/arch/arm64/include/asm/pgtable.h
>>>> @@ -359,6 +359,8 @@ static inline void set_ptes(struct mm_struct *mm,
>>>>    }
>>>>    #define set_ptes set_ptes
>>>>    +#define PFN_PTE_SHIFT          PAGE_SHIFT
>>>> +
>>>>    /*
>>>>     * Huge pte definitions.
>>>>     */
>>>>
>>>>
>>>> As an aside, I think there is a bug in arm64's set_ptes() for PA > 48-bit
>>>> case. But that won't affect this.
>>>>
>>>>
>>>> With VM_DEBUG on, this is the first warning I see during boot:
>>>>
>>>>
>>>> [    0.278110] page:00000000c7ced4e8 refcount:12 mapcount:0
>>>> mapping:00000000b2f9739b index:0x1a8 pfn:0x1bff30
>>>> [    0.278742] head:00000000c7ced4e8 order:2 entire_mapcount:0
>>>> nr_pages_mapped:2 pincount:0
>>>
>>> ^ Ah, you are running with mTHP. Let me play with that.
>>
>> Err... Its in mm-unstable, but I'm not enabling any sizes. It should only be set
>> up for PMD-sized THP.
>>
>> I am using XFS though, so I imagine its a file folio.
>>
>> I've rebased your rmap cleanup and fork batching to the version of mm-unstable
>> that I was doing all my other testing with so I could compare numbers. But its
>> not very old (perhaps a week). All the patches applied without any conflict.
> 
> I think it was something stupid: I would get "17" from folio_pte_batch() for an
> order-4 folio, but only sometimes. The rmap sanity checks were definitely worth
> it :)
> 
> I guess we hit the case "next mapped folio is actually the next physical folio"
> and the detection for that was off by one.
> 
> diff --git a/mm/memory.c b/mm/memory.c
> index 187d1b9b70e2..2af34add7ed7 100644
> --- a/mm/memory.c
> +++ b/mm/memory.c
> @@ -975,7 +975,7 @@ static inline int folio_pte_batch(struct folio *folio,
> unsigned long addr,
>                  * corner cases the next PFN might fall into a different
>                  * folio.
>                  */
> -               if (pte_pfn(pte) == folio_end_pfn - 1)
> +               if (pte_pfn(pte) == folio_end_pfn)
>                         break;
> 

haha, of course! I've been staring at this for an hour and didn't notice.

I no longer see any warnings during boot with debug enabled. Will rerun perf
measurements.


> Briefly tested, have to do more testing.
> 
> I only tested with order-9, which means max_nr would cap at 512. Shouldn't
> affect the performance measurements, will redo them.
> 

Powered by blists - more mailing lists