linux-kernel - Re: [PATCH v8 2/3] dts: zynqmp: add properties for TCM in remoteproc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e9e9777d-f8c1-48cd-b433-0292c77f6d57@amd.com>
Date: Wed, 20 Dec 2023 08:45:01 -0600
From: Tanmay Shah <tanmay.shah@....com>
To: Michal Simek <michal.simek@....com>, andersson@...nel.org,
 mathieu.poirier@...aro.org, robh+dt@...nel.org,
 krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, ben.levinsky@....com
Cc: linux-remoteproc@...r.kernel.org, devicetree@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v8 2/3] dts: zynqmp: add properties for TCM in remoteproc


On 12/20/23 7:14 AM, Michal Simek wrote:
>
> On 12/16/23 00:57, Tanmay Shah wrote:
> > Add properties as per new bindings in zynqmp remoteproc node
> > to represent TCM address and size.
> > 
> > This patch also adds alternative remoteproc node to represent
> > remoteproc cluster in split mode. By default lockstep mode is
> > enabled and users should disable it before using split mode
> > dts. Both device-tree nodes can't be used simultaneously one
> > of them must be disabled. For zcu102-1.0 and zcu102-1.1 board
> > remoteproc split mode dts node is enabled and lockstep mode
> > dts is disabled.
> > 
> > Signed-off-by: Tanmay Shah <tanmay.shah@....com>
> > ---
> >   .../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts  |  8 +++
> >   arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 60 +++++++++++++++++--
> >   2 files changed, 63 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
> > index c8f71a1aec89..495ca94b45db 100644
> > --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
> > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
> > @@ -14,6 +14,14 @@ / {
> >   	compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
> >   };
> >   
> > +&rproc_split {
> > +	status = "okay";
> > +};
> > +
> > +&rproc_lockstep {
> > +	status = "disabled";
> > +};
> > +
> >   &eeprom {
> >   	#address-cells = <1>;
> >   	#size-cells = <1>;
> > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> > index b61fc99cd911..602e6aba7ac5 100644
> > --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> > +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> > @@ -247,19 +247,69 @@ fpga_full: fpga-full {
> >   		ranges;
> >   	};
> >   
> > -	remoteproc {
> > +	rproc_lockstep: remoteproc@...00000 {
> >   		compatible = "xlnx,zynqmp-r5fss";
> >   		xlnx,cluster-mode = <1>;
> >   
> > -		r5f-0 {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +
> > +		ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x20000>,
> > +			 <0x0 0x20000 0x0 0xffe20000 0x0 0x20000>,
> > +			 <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
> > +			 <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
> > +
> > +		r5f@0 {
> > +			compatible = "xlnx,zynqmp-r5f";
> > +			reg = <0x0 0x0 0x0 0x20000>, <0x0 0x20000 0x0 0x20000>;
> > +			reg-names = "atcm", "btcm";
> > +			power-domains = <&zynqmp_firmware PD_RPU_0>,
> > +					<&zynqmp_firmware PD_R5_0_ATCM>,
> > +					<&zynqmp_firmware PD_R5_0_BTCM>;
> > +			memory-region = <&rproc_0_fw_image>;
> > +		};
> > +
> > +		r5f@1 {
> > +			compatible = "xlnx,zynqmp-r5f";
> > +			reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> > +			reg-names = "atcm", "btcm";
> > +			power-domains = <&zynqmp_firmware PD_RPU_1>,
> > +					<&zynqmp_firmware PD_R5_1_ATCM>,
> > +					<&zynqmp_firmware PD_R5_1_BTCM>;
> > +			memory-region = <&rproc_1_fw_image>;
> > +		};
> > +	};
> > +
> > +	rproc_split: remoteproc-split@...00000 {
> > +		status = "disabled";
> > +		compatible = "xlnx,zynqmp-r5fss";
> > +		xlnx,cluster-mode = <0>;
> > +
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +
> > +		ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> > +			 <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> > +			 <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
> > +			 <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
> > +
> > +		r5f@0 {
> >   			compatible = "xlnx,zynqmp-r5f";
> > -			power-domains = <&zynqmp_firmware PD_RPU_0>;
> > +			reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
> > +			reg-names = "atcm", "btcm";
> > +			power-domains = <&zynqmp_firmware PD_RPU_0>,
> > +					<&zynqmp_firmware PD_R5_0_ATCM>,
> > +					<&zynqmp_firmware PD_R5_0_BTCM>;
> >   			memory-region = <&rproc_0_fw_image>;
> >   		};
> >   
> > -		r5f-1 {
> > +		r5f@1 {
> >   			compatible = "xlnx,zynqmp-r5f";
> > -			power-domains = <&zynqmp_firmware PD_RPU_1>;
> > +			reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> > +			reg-names = "atcm", "btcm";
> > +			power-domains = <&zynqmp_firmware PD_RPU_1>,
> > +					<&zynqmp_firmware PD_R5_1_ATCM>,
> > +					<&zynqmp_firmware PD_R5_1_BTCM>;
> >   			memory-region = <&rproc_1_fw_image>;
> >   		};
> >   	};
>
> Acked-by: Michal Simek <michal.simek@....com>
>
> Let me know if you want me to take this via my tree.

Hi Michal,

Thanks for reviews. I will ping you once driver changes are approved.

Or Mathieu can take this in remoteproc tree, either way is fine.

But I would like to wait till driver changes are approved.

Tanmay

>
> Thanks,
> Michal