[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <irmn42brbxjwz45gh7hoay4aeollnq7gnzkuyuzjxjyh3syrst@mvgm7vecrhna>
Date: Wed, 20 Dec 2023 17:50:05 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Suraj Jaiswal <quic_jsuraj@...cinc.com>
Cc: Vinod Koul <vkoul@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>, Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>, netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com, Prasad Sodagudi <psodagud@...cinc.com>,
Andrew Halaney <ahalaney@...hat.com>, Rob Herring <robh@...nel.org>, kernel@...cinc.com
Subject: Re: [PATCH net-next v7 3/3] net: stmmac: Add driver support for
DWMAC5 common safety IRQ
Hi Suraj
On Tue, Dec 19, 2023 at 04:18:15PM +0530, Suraj Jaiswal wrote:
> Add support to listen HW safety IRQ like ECC(error
> correction code), DPP(data path parity), FSM(finite state
> machine) fault in common IRQ line.
>
> Signed-off-by: Suraj Jaiswal <quic_jsuraj@...cinc.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 ++
> .../net/ethernet/stmicro/stmmac/stmmac_main.c | 35 +++++++++++++++++++
> .../ethernet/stmicro/stmmac/stmmac_platform.c | 8 +++++
> 4 files changed, 46 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
> index 721c1f8e892f..b9233b09b80f 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
> @@ -344,6 +344,7 @@ enum request_irq_err {
> REQ_IRQ_ERR_ALL,
> REQ_IRQ_ERR_TX,
> REQ_IRQ_ERR_RX,
> + REQ_IRQ_ERR_SFTY,
> REQ_IRQ_ERR_SFTY_UE,
> REQ_IRQ_ERR_SFTY_CE,
> REQ_IRQ_ERR_LPI,
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> index 9f89acf31050..9aeaca01cace 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> @@ -31,6 +31,7 @@ struct stmmac_resources {
> int wol_irq;
> int lpi_irq;
> int irq;
> + int sfty_irq;
> int sfty_ce_irq;
> int sfty_ue_irq;
> int rx_irq[MTL_MAX_RX_QUEUES];
> @@ -297,6 +298,7 @@ struct stmmac_priv {
> void __iomem *ptpaddr;
> void __iomem *estaddr;
> unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
> + int sfty_irq;
> int sfty_ce_irq;
> int sfty_ue_irq;
> int rx_irq[MTL_MAX_RX_QUEUES];
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 47de466e432c..f6639ffb017e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -3592,6 +3592,10 @@ static void stmmac_free_irq(struct net_device *dev,
> if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
> free_irq(priv->wol_irq, dev);
> fallthrough;
> + case REQ_IRQ_ERR_SFTY:
> + if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq)
> + free_irq(priv->sfty_irq, dev);
> + fallthrough;
> case REQ_IRQ_ERR_WOL:
> free_irq(dev->irq, dev);
> fallthrough;
> @@ -3661,6 +3665,21 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> }
> }
>
> + /* Request the common Safety Feature Correctible/Uncorrectible
> + * Error line in case of another line is used
> + */
> + if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
> + ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
> + 0, dev->name, dev);
Not entirely what I asked. What I asked was to make the code unified in
the respective IRQ-request methods. You just copy-and-pasted the same
code snippet in both functions. To see what I meant please find the
diff attached to this message. It's applicable on top of this patch.
> + if (unlikely(ret < 0)) {
> + netdev_err(priv->dev,
> + "%s: alloc safety failed %d (error: %d)\n",
> + __func__, priv->sfty_irq, ret);
This looks different than the rest of the error messages in this
method (see the attached diff).
> + irq_err = REQ_IRQ_ERR_SFTY;
> + goto irq_error;
> + }
> + }
> +
> /* Request the Safety Feature Correctible Error line in
> * case of another line is used
> */
> @@ -3798,6 +3817,21 @@ static int stmmac_request_irq_single(struct net_device *dev)
> }
> }
>
> + /* Request the common Safety Feature Correctible/Uncorrectible
> + * Error line in case of another line is used
> + */
> + if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
> + ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
> + 0, dev->name, dev);
IRQF_SHARED?
> + if (unlikely(ret < 0)) {
> + netdev_err(priv->dev,
> + "%s: alloc safety failed %d (error: %d)\n",
> + __func__, priv->sfty_irq, ret);
This also looks different than the rest of the error messages in this
method (see the attached diff).
Some other comments I'll send to v8 after all the above finally fixed.
-Serge(y)
> + irq_err = REQ_IRQ_ERR_SFTY;
> + goto irq_error;
> + }
> + }
> +
> return 0;
>
> irq_error:
> @@ -7462,6 +7496,7 @@ int stmmac_dvr_probe(struct device *device,
> priv->dev->irq = res->irq;
> priv->wol_irq = res->wol_irq;
> priv->lpi_irq = res->lpi_irq;
> + priv->sfty_irq = res->sfty_irq;
> priv->sfty_ce_irq = res->sfty_ce_irq;
> priv->sfty_ue_irq = res->sfty_ue_irq;
> for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index 70eadc83ca68..ab250161fd79 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -743,6 +743,14 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
> dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
> }
>
> + stmmac_res->sfty_irq =
> + platform_get_irq_byname_optional(pdev, "sfty");
> + if (stmmac_res->sfty_irq < 0) {
> + if (stmmac_res->sfty_irq == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + dev_info(&pdev->dev, "IRQ safety IRQ not found\n");
> + }
> +
> stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
>
> return PTR_ERR_OR_ZERO(stmmac_res->addr);
> --
> 2.25.1
>
>
View attachment "common_sfty_irq.diff" of type "text/x-patch" (2012 bytes)
Powered by blists - more mailing lists