linux-kernel - [PATCH v3 01/10] counter: stm32-timer-cnt: rename quadrature signal

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231220145726.640627-2-fabrice.gasnier@foss.st.com>
Date: Wed, 20 Dec 2023 15:57:17 +0100
From: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
To: <william.gray@...aro.org>
CC: <lee@...nel.org>, <alexandre.torgue@...s.st.com>,
        <fabrice.gasnier@...s.st.com>, <linux-iio@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 01/10] counter: stm32-timer-cnt: rename quadrature signal

Drop the Quadrature convention in the signal name. On stm32-timer:
- Quadrature A signal corresponds to timer input ch1, hence "Channel 1"
- Quadrature B signal corresponds to timer input ch2, hence "Channel 2".
So name these signals after their channel. I suspect it referred to the
(unique) quadrature counter support earlier, but the physical input
really is CH1/CH2. This will be easier to support other counter modes.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
---
Changes in v2:
- Drop the "Quadrature" convention from the signal name, as suggested by
  William
---
 drivers/counter/stm32-timer-cnt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
index 6206d2dc3d47..36d812ddf162 100644
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -279,11 +279,11 @@ static const struct counter_ops stm32_timer_cnt_ops = {
 static struct counter_signal stm32_signals[] = {
 	{
 		.id = 0,
-		.name = "Channel 1 Quadrature A"
+		.name = "Channel 1"
 	},
 	{
 		.id = 1,
-		.name = "Channel 1 Quadrature B"
+		.name = "Channel 2"
 	}
 };
 
-- 
2.25.1