linux-kernel - [PATCH RFC v2 03/11] scsi: ufs: qcom: Perform read back after writing testbus config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231221-ufs-reset-ensure-effect-before-delay-v2-3-75af2a9bae51@redhat.com>
Date: Thu, 21 Dec 2023 12:25:20 -0600
From: Andrew Halaney <ahalaney@...hat.com>
To: Andy Gross <agross@...nel.org>, Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konrad.dybcio@...aro.org>, 
 Manivannan Sadhasivam <mani@...nel.org>, 
 "James E.J. Bottomley" <jejb@...ux.ibm.com>, 
 "Martin K. Petersen" <martin.petersen@...cle.com>, 
 Yaniv Gardi <ygardi@...eaurora.org>, Dov Levenglick <dovl@...eaurora.org>, 
 Hannes Reinecke <hare@...e.de>, Subhash Jadavani <subhashj@...eaurora.org>, 
 Gilad Broner <gbroner@...eaurora.org>, 
 Venkat Gopalakrishnan <venkatg@...eaurora.org>, 
 Janek Kotas <jank@...ence.com>, Alim Akhtar <alim.akhtar@...sung.com>, 
 Avri Altman <avri.altman@....com>, Bart Van Assche <bvanassche@....org>, 
 Anjana Hari <quic_ahari@...cinc.com>, Dolev Raviv <draviv@...eaurora.org>, 
 Can Guo <quic_cang@...cinc.com>
Cc: Will Deacon <will@...nel.org>, linux-arm-msm@...r.kernel.org, 
 linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Andrew Halaney <ahalaney@...hat.com>
Subject: [PATCH RFC v2 03/11] scsi: ufs: qcom: Perform read back after
 writing testbus config

Currently, the testbus configuration is written and completed with an
mb().

mb() ensure that the write completes, but completion doesn't mean
that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure the bit hits the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed
by writel()/readl()), it can safely be removed.

Fixes: 9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers")
Signed-off-by: Andrew Halaney <ahalaney@...hat.com>
---
 drivers/ufs/host/ufs-qcom.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 4c15c8a1d058..6df2ab3b6f23 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1332,6 +1332,9 @@ static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host)
 	ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN,
 			UFS_REG_TEST_BUS_EN, REG_UFS_CFG1);
 	ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1);
+
+	/* dummy read to ensure this has been enabled prior to returning */
+	ufshcd_readl(host->hba, REG_UFS_CFG1);
 }

 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host)
@@ -1429,11 +1432,6 @@ int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
 		    (u32)host->testbus.select_minor << offset,
 		    reg);
 	ufs_qcom_enable_test_bus(host);
-	/*
-	 * Make sure the test bus configuration is
-	 * committed before returning.
-	 */
-	mb();

 	return 0;
 }

-- 
2.43.0