[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231221185702.24685-1-brgl@bgdev.pl>
Date: Thu, 21 Dec 2023 19:57:02 +0100
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Tony Lindgren <tony@...mide.com>,
Linus Walleij <linus.walleij@...aro.org>,
Andy Shevchenko <andy@...nel.org>
Cc: linux-omap@...r.kernel.org,
linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH] gpio: tps65219: don't use CONFIG_DEBUG_GPIO
From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
CONFIG_DEBUG_GPIO should only be used to enable debug log messages and
for core GPIOLIB debugging. Don't use it to control the execution of
potentially buggy code. Just put it under an always-false #if.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
---
drivers/gpio/gpio-tps65219.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/gpio/gpio-tps65219.c b/drivers/gpio/gpio-tps65219.c
index 7b38aa360112..cd1f17041f8c 100644
--- a/drivers/gpio/gpio-tps65219.c
+++ b/drivers/gpio/gpio-tps65219.c
@@ -96,16 +96,16 @@ static int tps65219_gpio_change_direction(struct gpio_chip *gc, unsigned int off
* Below can be used for test purpose only.
*/
- if (IS_ENABLED(CONFIG_DEBUG_GPIO)) {
- int ret = regmap_update_bits(gpio->tps->regmap, TPS65219_REG_MFP_1_CONFIG,
- TPS65219_GPIO0_DIR_MASK, direction);
- if (ret) {
- dev_err(dev,
- "GPIO DEBUG enabled: Fail to change direction to %u for GPIO%d.\n",
- direction, offset);
- return ret;
- }
+#if 0
+ int ret = regmap_update_bits(gpio->tps->regmap, TPS65219_REG_MFP_1_CONFIG,
+ TPS65219_GPIO0_DIR_MASK, direction);
+ if (ret) {
+ dev_err(dev,
+ "GPIO DEBUG enabled: Fail to change direction to %u for GPIO%d.\n",
+ direction, offset);
+ return ret;
}
+#endif
dev_err(dev,
"GPIO%d direction set by NVM, change to %u failed, not allowed by specification\n",
--
2.40.1
Powered by blists - more mailing lists