| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231221185838.28440-4-quic_amelende@quicinc.com>
Date: Thu, 21 Dec 2023 10:58:33 -0800
From: Anjelique Melendez <quic_amelende@...cinc.com>
To: <pavel@....cz>, <lee@...nel.org>, <thierry.reding@...il.com>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <agross@...nel.org>, <andersson@...nel.org>
CC: <luca.weiss@...rphone.com>, <konrad.dybcio@...aro.org>,
<u.kleine-koenig@...gutronix.de>, <quic_subbaram@...cinc.com>,
<quic_gurus@...cinc.com>, <linux-leds@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>, <linux-pwm@...r.kernel.org>,
"Anjelique
Melendez" <quic_amelende@...cinc.com>
Subject: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
Add the Qualcomm PBS (Programmable Boot Sequencer) driver. The QCOM PBS
driver supports configuring software PBS trigger events through PBS RAM
on Qualcomm Technologies, Inc (QTI) PMICs.
Signed-off-by: Anjelique Melendez <quic_amelende@...cinc.com>
---
drivers/soc/qcom/Kconfig | 9 ++
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom-pbs.c | 243 ++++++++++++++++++++++++++++++
include/linux/soc/qcom/qcom-pbs.h | 30 ++++
4 files changed, 283 insertions(+)
create mode 100644 drivers/soc/qcom/qcom-pbs.c
create mode 100644 include/linux/soc/qcom/qcom-pbs.h
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index b3634e10f6f5..52aa58b02e72 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -254,4 +254,13 @@ config QCOM_INLINE_CRYPTO_ENGINE
tristate
select QCOM_SCM
+config QCOM_PBS
+ tristate "PBS trigger support for Qualcomm Technologies, Inc. PMICS"
+ depends on SPMI
+ help
+ This driver supports configuring software programmable boot sequencer (PBS)
+ trigger event through PBS RAM on Qualcomm Technologies, Inc. PMICs.
+ This module provides the APIs to the client drivers that wants to send the
+ PBS trigger event to the PBS RAM.
+
endmenu
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index bbca2e1e55bb..49bb86b0fe33 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -32,3 +32,4 @@ obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o
obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o
qcom_ice-objs += ice.o
obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE) += qcom_ice.o
+obj-$(CONFIG_QCOM_PBS) += qcom-pbs.o
diff --git a/drivers/soc/qcom/qcom-pbs.c b/drivers/soc/qcom/qcom-pbs.c
new file mode 100644
index 000000000000..b49d14bb7d08
--- /dev/null
+++ b/drivers/soc/qcom/qcom-pbs.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/spmi.h>
+#include <linux/soc/qcom/qcom-pbs.h>
+
+#define PBS_CLIENT_TRIG_CTL 0x42
+#define PBS_CLIENT_SW_TRIG_BIT BIT(7)
+#define PBS_CLIENT_SCRATCH1 0x50
+#define PBS_CLIENT_SCRATCH2 0x51
+#define PBS_CLIENT_SCRATCH2_ERROR 0xFF
+
+struct pbs_dev {
+ struct device *dev;
+ struct regmap *regmap;
+ struct mutex lock;
+ struct device_link *link;
+
+ u32 base;
+};
+
+static int qcom_pbs_wait_for_ack(struct pbs_dev *pbs, u8 bit_pos)
+{
+ int ret, retries = 2000, delay = 1100;
+ unsigned int val;
+
+ ret = regmap_read_poll_timeout(pbs->regmap, pbs->base + PBS_CLIENT_SCRATCH2,
+ val, val & BIT(bit_pos), delay, delay * retries);
+
+ if (ret < 0) {
+ dev_err(pbs->dev, "Timeout for PBS ACK/NACK for bit %u\n", bit_pos);
+ return -ETIMEDOUT;
+ }
+
+ if (val == PBS_CLIENT_SCRATCH2_ERROR) {
+ ret = regmap_write(pbs->regmap, pbs->base + PBS_CLIENT_SCRATCH2, 0);
+ dev_err(pbs->dev, "NACK from PBS for bit %u\n", bit_pos);
+ return -EINVAL;
+ }
+
+ dev_dbg(pbs->dev, "PBS sequence for bit %u executed!\n", bit_pos);
+ return 0;
+}
+
+/**
+ * qcom_pbs_trigger_event() - Trigger the PBS RAM sequence
+ * @pbs: Pointer to PBS device
+ * @bitmap: bitmap
+ *
+ * This function is used to trigger the PBS RAM sequence to be
+ * executed by the client driver.
+ *
+ * The PBS trigger sequence involves
+ * 1. setting the PBS sequence bit in PBS_CLIENT_SCRATCH1
+ * 2. Initiating the SW PBS trigger
+ * 3. Checking the equivalent bit in PBS_CLIENT_SCRATCH2 for the
+ * completion of the sequence.
+ * 4. If PBS_CLIENT_SCRATCH2 == 0xFF, the PBS sequence failed to execute
+ *
+ * Returns: 0 on success, < 0 on failure
+ */
+int qcom_pbs_trigger_event(struct pbs_dev *pbs, u8 bitmap)
+{
+ unsigned int val;
+ u16 bit_pos;
+ int ret;
+
+ if (!bitmap) {
+ dev_err(pbs->dev, "Invalid bitmap passed by client\n");
+ return -EINVAL;
+ }
+
+ if (IS_ERR_OR_NULL(pbs))
+ return -EINVAL;
+
+ mutex_lock(&pbs->lock);
+ ret = regmap_read(pbs->regmap, pbs->base + PBS_CLIENT_SCRATCH2, &val);
+ if (ret < 0)
+ goto out;
+
+ if (val == PBS_CLIENT_SCRATCH2_ERROR) {
+ /* PBS error - clear SCRATCH2 register */
+ ret = regmap_write(pbs->regmap, pbs->base + PBS_CLIENT_SCRATCH2, 0);
+ if (ret < 0)
+ goto out;
+ }
+
+ for (bit_pos = 0; bit_pos < 8; bit_pos++) {
+ if (!(bitmap & BIT(bit_pos)))
+ continue;
+
+ /* Clear the PBS sequence bit position */
+ ret = regmap_update_bits(pbs->regmap, pbs->base + PBS_CLIENT_SCRATCH2,
+ BIT(bit_pos), 0);
+ if (ret < 0)
+ goto error;
+
+ /* Set the PBS sequence bit position */
+ ret = regmap_update_bits(pbs->regmap, pbs->base + PBS_CLIENT_SCRATCH1,
+ BIT(bit_pos), BIT(bit_pos));
+ if (ret < 0)
+ goto error;
+
+ /* Initiate the SW trigger */
+ ret = regmap_update_bits(pbs->regmap, pbs->base + PBS_CLIENT_TRIG_CTL,
+ PBS_CLIENT_SW_TRIG_BIT, PBS_CLIENT_SW_TRIG_BIT);
+ if (ret < 0)
+ goto error;
+
+ ret = qcom_pbs_wait_for_ack(pbs, bit_pos);
+ if (ret < 0)
+ goto error;
+
+ /* Clear the PBS sequence bit position */
+ ret = regmap_update_bits(pbs->regmap, pbs->base + PBS_CLIENT_SCRATCH1,
+ BIT(bit_pos), 0);
+ if (ret < 0)
+ goto error;
+
+ /* Clear the PBS sequence bit position */
+ ret = regmap_update_bits(pbs->regmap, pbs->base + PBS_CLIENT_SCRATCH2,
+ BIT(bit_pos), 0);
+ if (ret < 0)
+ goto error;
+ }
+
+error:
+ /* Clear all the requested bitmap */
+ ret = regmap_update_bits(pbs->regmap, pbs->base + PBS_CLIENT_SCRATCH1, bitmap, 0);
+
+out:
+ mutex_unlock(&pbs->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_pbs_trigger_event);
+
+/**
+ * get_pbs_client_device() - Get the PBS device used by client
+ * @dev: Client device
+ *
+ * This function is used to get the PBS device that is being
+ * used by the client.
+ *
+ * Returns: pbs_dev on success, ERR_PTR on failure
+ */
+struct pbs_dev *get_pbs_client_device(struct device *dev)
+{
+ struct device_node *pbs_dev_node;
+ struct platform_device *pdev;
+ struct pbs_dev *pbs;
+
+ pbs_dev_node = of_parse_phandle(dev->of_node, "qcom,pbs", 0);
+ if (!pbs_dev_node) {
+ dev_err(dev, "Missing qcom,pbs property\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ pdev = of_find_device_by_node(pbs_dev_node);
+ if (!pdev) {
+ dev_err(dev, "Unable to find PBS dev_node\n");
+ pbs = ERR_PTR(-EPROBE_DEFER);
+ goto out;
+ }
+
+ pbs = platform_get_drvdata(pdev);
+ if (!pbs) {
+ dev_err(dev, "Cannot get pbs instance from %s\n", dev_name(&pdev->dev));
+ platform_device_put(pdev);
+ pbs = ERR_PTR(-EPROBE_DEFER);
+ goto out;
+ }
+
+ pbs->link = device_link_add(dev, &pdev->dev, DL_FLAG_AUTOREMOVE_SUPPLIER);
+ if (!pbs->link) {
+ dev_err(&pdev->dev, "Failed to create device link to consumer %s\n", dev_name(dev));
+ platform_device_put(pdev);
+ pbs = ERR_PTR(-EINVAL);
+ goto out;
+ }
+
+out:
+ of_node_put(pbs_dev_node);
+ return pbs;
+}
+EXPORT_SYMBOL_GPL(get_pbs_client_device);
+
+static int qcom_pbs_probe(struct platform_device *pdev)
+{
+ struct pbs_dev *pbs;
+ u32 val;
+ int ret;
+
+ pbs = devm_kzalloc(&pdev->dev, sizeof(*pbs), GFP_KERNEL);
+ if (!pbs)
+ return -ENOMEM;
+
+ pbs->dev = &pdev->dev;
+ pbs->regmap = dev_get_regmap(pbs->dev->parent, NULL);
+ if (!pbs->regmap) {
+ dev_err(pbs->dev, "Couldn't get parent's regmap\n");
+ return -EINVAL;
+ }
+
+ ret = device_property_read_u32(pbs->dev, "reg", &val);
+ if (ret < 0) {
+ dev_err(pbs->dev, "Couldn't find reg, ret = %d\n", ret);
+ return ret;
+ }
+ pbs->base = val;
+ mutex_init(&pbs->lock);
+
+ platform_set_drvdata(pdev, pbs);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_pbs_match_table[] = {
+ { .compatible = "qcom,pbs" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qcom_pbs_match_table);
+
+static struct platform_driver qcom_pbs_driver = {
+ .driver = {
+ .name = "qcom-pbs",
+ .of_match_table = qcom_pbs_match_table,
+ },
+ .probe = qcom_pbs_probe,
+};
+module_platform_driver(qcom_pbs_driver)
+
+MODULE_DESCRIPTION("QCOM PBS DRIVER");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/soc/qcom/qcom-pbs.h b/include/linux/soc/qcom/qcom-pbs.h
new file mode 100644
index 000000000000..8a46209ccf13
--- /dev/null
+++ b/include/linux/soc/qcom/qcom-pbs.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _QCOM_PBS_H
+#define _QCOM_PBS_H
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+struct device_node;
+struct pbs_dev;
+
+#if IS_ENABLED(CONFIG_QCOM_PBS)
+int qcom_pbs_trigger_event(struct pbs_dev *pbs, u8 bitmap);
+struct pbs_dev *get_pbs_client_device(struct device *client_dev);
+#else
+static inline int qcom_pbs_trigger_event(struct pbs_dev *pbs, u8 bitmap)
+{
+ return -ENODEV;
+}
+
+static inline struct pbs_dev *get_pbs_client_device(struct device *client_dev)
+{
+ return ERR_PTR(-ENODEV);
+}
+#endif
+
+#endif
--
2.41.0
Powered by blists - more mailing lists