[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231220-sa8295p-gpu-v1-6-d8cdf2257f97@quicinc.com>
Date: Wed, 20 Dec 2023 19:50:40 -0800
From: Bjorn Andersson <quic_bjorande@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konrad.dybcio@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh+dt@...nel.org>,
"Krzysztof
Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley
<conor+dt@...nel.org>,
Taniya Das <quic_tdas@...cinc.com>,
Ulf Hansson
<ulf.hansson@...aro.org>,
Johan Hovold <johan+linaro@...nel.org>,
"Catalin
Marinas" <catalin.marinas@....com>,
Will Deacon <will@...nel.org>
CC: <linux-arm-msm@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-pm@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
"Bjorn
Andersson" <quic_bjorande@...cinc.com>,
Bjorn Andersson
<andersson@...nel.org>
Subject: [PATCH 6/8] arm64: dts: qcom: sa8295p-adp: add max20411
From: Bjorn Andersson <andersson@...nel.org>
The SA8295P ADP has a MAX20411 LDO regulator on I2C 12, supplying the
VDD_GFX pads. Enable the bus and add the maxim,max20411 device on the
bus.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 40 ++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index fd253942e5e5..e16406c9c19d 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -266,6 +266,26 @@ &dispcc1 {
status = "okay";
};
+&i2c12 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup1_i2c4_state>;
+
+ status = "okay";
+
+ vdd_gfx: regulator@39 {
+ compatible = "maxim,max20411";
+ reg = <0x39>;
+
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <968750>;
+
+ enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&max20411_en>;
+ };
+};
+
&mdss0 {
status = "okay";
};
@@ -476,6 +496,10 @@ &pcie4_phy {
status = "okay";
};
+&qup1 {
+ status = "okay";
+};
+
&qup2 {
status = "okay";
};
@@ -728,4 +752,20 @@ wake-n-pins {
bias-pull-up;
};
};
+
+ qup1_i2c4_state: qup1-i2c4-state {
+ pins = "gpio0", "gpio1";
+ function = "qup12";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&pmm8540a_gpios {
+ max20411_en: max20411-en-state {
+ pins = "gpio2";
+ function = "normal";
+ output-enable;
+ };
};
--
2.25.1
Powered by blists - more mailing lists