| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <de5080a3-c4a7-492f-92c1-cbcfc80d471d@rock-chips.com>
Date: Thu, 21 Dec 2023 16:28:29 +0800
From: Andy Yan <andy.yan@...k-chips.com>
To: Johan Jonker <jbx6244@...il.com>, Andy Yan <andyshrk@....com>,
heiko@...ech.de
Cc: krzysztof.kozlowski+dt@...aro.org, robh+dt@...nel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
david.wu@...k-chips.com, romain.perier@...il.com
Subject: Re: [PATCH] Revert "ARM: dts: rockchip: restyle emac nodes"
Hi Johan,
On 12/20/23 19:58, Johan Jonker wrote:
>
>
> On 12/20/23 11:33, Andy Yan wrote:
>> From: Andy Yan <andy.yan@...k-chips.com>
>>
>> When try to run rk3036 kylin board with mainline,
>> I found the emac ethernet probe failed:
>>
>> [ 2.324583] loop: module loaded
>> [ 2.328435] SPI driver spidev has no spi_device_id for rockchip,spidev
>> [ 2.338688] tun: Universal TUN/TAP device driver, 1.6
>> [ 2.345397] rockchip_emac 10200000.ethernet: no regulator found
>> [ 2.351892] rockchip_emac 10200000.ethernet: ARC EMAC detected with id: 0x7fd02
>> [ 2.359331] rockchip_emac 10200000.ethernet: IRQ is 43
>> [ 2.364719] rockchip_emac 10200000.ethernet: MAC address is now e6:58:d6:ec:d9:7c
>> [ 2.396993] mdio_bus Synopsys MII Bus: mdio has invalid PHY address
>> [ 2.403306] mdio_bus Synopsys MII Bus: scan phy mdio at address 0
>> [ 2.508656] rockchip_emac 10200000.ethernet: of_phy_connect() failed
>> [ 2.516334] rockchip_emac 10200000.ethernet: failed to probe arc emac (-19)
>>
>> This reverts commit 1dabb74971b3 ("ARM: dts: rockchip: restyle emac nodes")
>> make emac on rk3036 kylin board probe right again:
>> [ 1.920385] CAN device driver interface
>> [ 1.925499] rockchip_emac 10200000.ethernet: no regulator found
>> [ 1.932535] rockchip_emac 10200000.ethernet: ARC EMAC detected with id: 0x7fd02
>> [ 1.940735] rockchip_emac 10200000.ethernet: IRQ is 42
>> [ 1.946743] rockchip_emac 10200000.ethernet: MAC address is now 96:7d:4f:0a:69:b3
>> [ 2.581340] rockchip_emac 10200000.ethernet: connected to Generic PHY phy with id 0xffffc816
>> [ 2.592560] e1000e: Intel(R) PRO/1000 Network Driver
>> [ 2.598136] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>>
>> Fixes: 1dabb74971b3 ("ARM: dts: rockchip: restyle emac nodes")
>> Signed-off-by: Andy Yan <andy.yan@...k-chips.com>
>> ---
>>
>> arch/arm/boot/dts/rockchip/rk3036-evb.dts | 16 ++++++----------
>> arch/arm/boot/dts/rockchip/rk3036-kylin.dts | 16 ++++++----------
>> arch/arm/boot/dts/rockchip/rk3036.dtsi | 2 ++
>> .../boot/dts/rockchip/rk3066a-marsboard.dts | 17 +++++++----------
>> .../boot/dts/rockchip/rk3066a-rayeager.dts | 15 +++++----------
>> .../boot/dts/rockchip/rk3188-radxarock.dts | 19 ++++++++-----------
>> arch/arm/boot/dts/rockchip/rk3xxx.dtsi | 2 ++
>> 7 files changed, 36 insertions(+), 51 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/rockchip/rk3036-evb.dts b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
>> index becdc0b664bf..94216f870b57 100644
>> --- a/arch/arm/boot/dts/rockchip/rk3036-evb.dts
>> +++ b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
>> @@ -15,20 +15,16 @@ memory@...00000 {
>> };
>>
>> &emac {
>> - phy = <&phy0>;
>> - phy-reset-duration = <10>; /* millisecond */
>> - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
>> pinctrl-names = "default";
>> pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
>> - status = "okay";
>> + phy = <&phy0>;
>> + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
>> + phy-reset-duration = <10>; /* millisecond */
>
>
>>
>> - mdio {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> + status = "okay";
>>
>> - phy0: ethernet-phy@0 {
>> - reg = <0>;
>> - };
>> + phy0: ethernet-phy@0 {
>> + reg = <0>;
>> };
>
> Sorry, didn't have the hardware when changing that binding.
> A little bit background info:
>
> The rk3036 TRM states:
> Management Interface (MDIO) state machine for easy real-time communication with the
> PHY
>
> A revert of the DT must also match a binding. But...
> Bindings must describe the hardware as close as possible.
> So when the phy is called over the mdio we must add phy as part of a mdio node.(Is that correct? Ask a expert!)
> Somehow the old emac driver doesn't support this sub node setup.
> First request would be have a look to make the driver work as it should.
Because I lack of knowledge about net driver, I am not sure if the mdio is mandatory.
I post this revert also want to have some suggestion from the net expert.
From some grep:
emac_rockchip is based on arc-emac, but the example of arc_emac does not have a mdio node[0]
thera are also other platforms use the same way[1]
[0] Documentation/devicetree/bindings/net/arc_emac.txt
[1]arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
>
> Johan
>
>> };
>>
>> diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
>> index 67e1e04139e7..e817eba8c622 100644
>> --- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
>> +++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
>> @@ -80,20 +80,16 @@ &acodec {
>> };
>>
>> &emac {
>> - phy = <&phy0>;
>> - phy-reset-duration = <10>; /* millisecond */
>> - phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
>> pinctrl-names = "default";
>> pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
>> - status = "okay";
>> + phy = <&phy0>;
>> + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
>> + phy-reset-duration = <10>; /* millisecond */
>>
>> - mdio {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> + status = "okay";
>>
>> - phy0: ethernet-phy@0 {
>> - reg = <0>;
>> - };
>> + phy0: ethernet-phy@0 {
>> + reg = <0>;
>> };
>> };
>>
>> diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
>> index 78686fc72ce6..e240b89b0b35 100644
>> --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
>> +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
>> @@ -228,6 +228,8 @@ emac: ethernet@...00000 {
>> compatible = "rockchip,rk3036-emac";
>> reg = <0x10200000 0x4000>;
>> interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> rockchip,grf = <&grf>;
>> clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
>> clock-names = "hclk", "macref", "macclk";
>> diff --git a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
>> index f6e8d49a02ef..e3d6f0e81330 100644
>> --- a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
>> +++ b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
>> @@ -150,21 +150,18 @@ vcc28_cif: regulator@12 {
>> #include "../tps65910.dtsi"
>>
>> &emac {
>> + status = "okay";
>> +
>> phy = <&phy0>;
>> phy-supply = <&vcc_rmii>;
>> +
>> pinctrl-names = "default";
>> pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
>> - status = "okay";
>> -
>> - mdio {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>>
>> - phy0: ethernet-phy@0 {
>> - reg = <0>;
>> - interrupt-parent = <&gpio1>;
>> - interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
>> - };
>> + phy0: ethernet-phy@0 {
>> + reg = <0>;
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
>> };
>> };
>>
>> diff --git a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
>> index 29d8e5bf88f5..096616324c2d 100644
>> --- a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
>> +++ b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
>> @@ -142,20 +142,15 @@ &cpu1 {
>> };
>>
>> &emac {
>> - phy = <&phy0>;
>> - phy-supply = <&vcc_rmii>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
>> + phy = <&phy0>;
>> + phy-supply = <&vcc_rmii>;
>> status = "okay";
>>
>> - mdio {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - phy0: ethernet-phy@0 {
>> - reg = <0>;
>> - reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
>> - };
>> + phy0: ethernet-phy@0 {
>> + reg = <0>;
>> + reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
>> };
>> };
>>
>> diff --git a/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts b/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts
>> index 118deacd38c4..239d2ec37fdc 100644
>> --- a/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts
>> +++ b/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts
>> @@ -126,21 +126,18 @@ vsys: vsys-regulator {
>> };
>>
>> &emac {
>> - phy = <&phy0>;
>> - phy-supply = <&vcc_rmii>;
>> + status = "okay";
>> +
>> pinctrl-names = "default";
>> pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
>> - status = "okay";
>>
>> - mdio {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> + phy = <&phy0>;
>> + phy-supply = <&vcc_rmii>;
>>
>> - phy0: ethernet-phy@0 {
>> - reg = <0>;
>> - interrupt-parent = <&gpio3>;
>> - interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
>> - };
>> + phy0: ethernet-phy@0 {
>> + reg = <0>;
>> + interrupt-parent = <&gpio3>;
>> + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
>> };
>> };
>>
>> diff --git a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
>> index cb4e42ede56a..17e89d30de78 100644
>> --- a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
>> +++ b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
>> @@ -193,6 +193,8 @@ emac: ethernet@...04000 {
>> compatible = "snps,arc-emac";
>> reg = <0x10204000 0x3c>;
>> interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>>
>> rockchip,grf = <&grf>;
>>
Powered by blists - more mailing lists