| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231222113552.2049088-2-claudiu.beznea.uj@bp.renesas.com>
Date: Fri, 22 Dec 2023 13:35:52 +0200
From: Claudiu <claudiu.beznea@...on.dev>
To: s.shtylyov@....ru,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
yoshihiro.shimoda.uh@...esas.com,
wsa+renesas@...g-engineering.com,
mitsuhiro.kimura.kc@...esas.com
Cc: netdev@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org,
claudiu.beznea@...on.dev,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH net v2 1/1] net: ravb: Wait for operation mode to be applied
From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
CSR.OPS bits specify the current operating mode and (according to
documentation) they are updated by HW when the operating mode change
request is processed. To comply with this check CSR.OPS before proceeding.
Commit introduces ravb_set_opmode() that does all the necessities for
setting the operating mode (set DMA.CCC and wait for CSR.OPS) and call it
where needed. This should comply with all the HW manuals requirements as
different manual variants specify that different modes need to be checked
in CSR.OPS when setting DMA.CCC.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
---
drivers/net/ethernet/renesas/ravb_main.c | 52 ++++++++++++++----------
1 file changed, 31 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 664eda4b5a11..ae99d035a3b6 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -66,14 +66,15 @@ int ravb_wait(struct net_device *ndev, enum ravb_reg reg, u32 mask, u32 value)
return -ETIMEDOUT;
}
-static int ravb_config(struct net_device *ndev)
+static int ravb_set_opmode(struct net_device *ndev, u32 opmode)
{
+ u32 csr_opmode = 1UL << opmode;
int error;
- /* Set config mode */
- ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
- /* Check if the operating mode is changed to the config mode */
- error = ravb_wait(ndev, CSR, CSR_OPS, CSR_OPS_CONFIG);
+ /* Set operating mode */
+ ravb_modify(ndev, CCC, CCC_OPC, opmode);
+ /* Check if the operating mode is changed to the requested one */
+ error = ravb_wait(ndev, CSR, CSR_OPS, csr_opmode);
if (error)
netdev_err(ndev, "failed to switch device to config mode\n");
@@ -673,7 +674,7 @@ static int ravb_dmac_init(struct net_device *ndev)
int error;
/* Set CONFIG mode */
- error = ravb_config(ndev);
+ error = ravb_set_opmode(ndev, CCC_OPC_CONFIG);
if (error)
return error;
@@ -682,9 +683,7 @@ static int ravb_dmac_init(struct net_device *ndev)
return error;
/* Setting the control will start the AVB-DMAC process. */
- ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_OPERATION);
-
- return 0;
+ return ravb_set_opmode(ndev, CCC_OPC_OPERATION);
}
static void ravb_get_tx_tstamp(struct net_device *ndev)
@@ -1046,7 +1045,7 @@ static int ravb_stop_dma(struct net_device *ndev)
return error;
/* Stop AVB-DMAC process */
- return ravb_config(ndev);
+ return ravb_set_opmode(ndev, CCC_OPC_CONFIG);
}
/* E-MAC interrupt handler */
@@ -2560,21 +2559,23 @@ static int ravb_set_gti(struct net_device *ndev)
return 0;
}
-static void ravb_set_config_mode(struct net_device *ndev)
+static int ravb_set_config_mode(struct net_device *ndev)
{
struct ravb_private *priv = netdev_priv(ndev);
const struct ravb_hw_info *info = priv->info;
+ int error;
if (info->gptp) {
- ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
+ error = ravb_set_opmode(ndev, CCC_OPC_CONFIG);
/* Set CSEL value */
ravb_modify(ndev, CCC, CCC_CSEL, CCC_CSEL_HPB);
} else if (info->ccc_gac) {
- ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG |
- CCC_GAC | CCC_CSEL_HPB);
+ error = ravb_set_opmode(ndev, CCC_OPC_CONFIG | CCC_GAC | CCC_CSEL_HPB);
} else {
- ravb_modify(ndev, CCC, CCC_OPC, CCC_OPC_CONFIG);
+ error = ravb_set_opmode(ndev, CCC_OPC_CONFIG);
}
+
+ return error;
}
/* Set tx and rx clock internal delay modes */
@@ -2794,7 +2795,9 @@ static int ravb_probe(struct platform_device *pdev)
ndev->ethtool_ops = &ravb_ethtool_ops;
/* Set AVB config mode */
- ravb_set_config_mode(ndev);
+ error = ravb_set_config_mode(ndev);
+ if (error)
+ goto out_disable_gptp_clk;
if (info->gptp || info->ccc_gac) {
/* Set GTI value */
@@ -2902,6 +2905,7 @@ static void ravb_remove(struct platform_device *pdev)
struct net_device *ndev = platform_get_drvdata(pdev);
struct ravb_private *priv = netdev_priv(ndev);
const struct ravb_hw_info *info = priv->info;
+ int error;
unregister_netdev(ndev);
if (info->nc_queues)
@@ -2917,8 +2921,9 @@ static void ravb_remove(struct platform_device *pdev)
dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
priv->desc_bat_dma);
- /* Set reset mode */
- ravb_write(ndev, CCC_OPC_RESET, CCC);
+ error = ravb_set_opmode(ndev, CCC_OPC_RESET);
+ if (error)
+ netdev_err(ndev, "Failed to reset ndev\n");
clk_disable_unprepare(priv->gptp_clk);
clk_disable_unprepare(priv->refclk);
@@ -3000,8 +3005,11 @@ static int __maybe_unused ravb_resume(struct device *dev)
int ret = 0;
/* If WoL is enabled set reset mode to rearm the WoL logic */
- if (priv->wol_enabled)
- ravb_write(ndev, CCC_OPC_RESET, CCC);
+ if (priv->wol_enabled) {
+ ret = ravb_set_opmode(ndev, CCC_OPC_RESET);
+ if (ret)
+ return ret;
+ }
/* All register have been reset to default values.
* Restore all registers which where setup at probe time and
@@ -3009,7 +3017,9 @@ static int __maybe_unused ravb_resume(struct device *dev)
*/
/* Set AVB config mode */
- ravb_set_config_mode(ndev);
+ ret = ravb_set_config_mode(ndev);
+ if (ret)
+ return ret;
if (info->gptp || info->ccc_gac) {
/* Set GTI value */
--
2.39.2
Powered by blists - more mailing lists