[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <2404910.8hb0ThOEGa@diego>
Date: Sun, 24 Dec 2023 19:59:36 +0100
From: Heiko Stübner <heiko@...ech.de>
To: linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Trevor Woerner <twoerner@...il.com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org
Subject: Re: [PATCH] arm64: rockchip: dts: rk3328-rock-pi-e: enable GbE eth
Hi Trevor,
Am Donnerstag, 21. Dezember 2023, 07:22:43 CET schrieb Trevor Woerner:
> Adjust the device-tree to get the GbE interface working using a patch found
> on the Radxa forum.
>
> Link: https://forum.radxa.com/t/rock-pi-e-board-version-1-21-ethhernet-not-working-in-armbian/15061/3
> Signed-off-by: Trevor Woerner <twoerner@...il.com>
> ---
> @@ -165,15 +165,17 @@ mdio {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - rtl8211e: ethernet-phy@1 {
> + rtl8211f: ethernet-phy@1 {
> + compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
skipping through that thread, it looks like there are variants of the
board with one of the rtl8211e _or_ rtl8211f phys.
So while the "ethernet-phy-ieee802.3-c22" compatible would work for both,
the "ethernet-phy-id001c.c916" compat effectively disables phy- probing.
So applying this patch would effectively disable ethernet support on those
older rock-pi-e boards?
In a similar context concerning boards using different phys, it was
suggested [0] that the bootloader should modify the dt it passes to the
kernel to provide the correct phy id.
> reg = <1>;
> pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>;
> pinctrl-names = "default";
> interrupt-parent = <&gpio1>;
> interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
> - reset-assert-us = <10000>;
> - reset-deassert-us = <50000>;
> + reset-assert-us = <20000>;
> + reset-deassert-us = <100000>;
I guess for those we can consolidate onto the "slower" ones in the kernel though.
> reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
> + max-speed = <1000>;
> };
> };
> };
>
Heiko
[0] https://lore.kernel.org/all/ecbdcfb7-32ab-45cc-991a-982c52bf4b14@gmail.com/
Powered by blists - more mailing lists