[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6600c6b1-2230-4963-940c-8b95a01750fd@arinc9.com>
Date: Sun, 24 Dec 2023 10:37:12 +0300
From: Arınç ÜNAL <arinc.unal@...nc9.com>
To: Vladimir Oltean <olteanv@...il.com>
Cc: Daniel Golle <daniel@...rotopia.org>,
Landen Chao <Landen.Chao@...iatek.com>, DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
David Bauer <mail@...id-bauer.net>, mithat.guner@...ont.com,
erkin.bozoglu@...ont.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net-next] net: dsa: mt7530: register OF node for internal
MDIO bus
On 21.12.2023 18:16, Vladimir Oltean wrote:
> On Wed, Dec 20, 2023 at 07:35:39PM +0200, Arınç ÜNAL wrote:
>> From: David Bauer <mail@...id-bauer.net>
>>
>> The MT753x switches provide a switch-internal MDIO bus for the embedded
>> PHYs.
>>
>> Register a OF sub-node on the switch OF-node for this internal MDIO bus.
>> This allows to configure the embedded PHYs using device-tree.
>>
>> Signed-off-by: David Bauer <mail@...id-bauer.net>
>> Signed-off-by: Daniel Golle <daniel@...rotopia.org>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
>> ---
>
> Can you please not assign "bus" to ds->user_mii_bus unless there is no
> "mdio" OF node? We don't need ds->user_mii_bus populated when it is
> described in device tree.
Do you mean like this:
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 391c4dbdff42..d239462a4bd8 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2155,15 +2155,21 @@ mt7530_setup_mdio(struct mt7530_priv *priv)
{
struct dsa_switch *ds = priv->ds;
struct device *dev = priv->dev;
+ struct device_node *np, *mnp;
struct mii_bus *bus;
static int idx;
int ret;
+ np = priv->dev->of_node;
+ mnp = of_get_child_by_name(np, "mdio");
+
bus = devm_mdiobus_alloc(dev);
if (!bus)
return -ENOMEM;
- ds->user_mii_bus = bus;
+ if (mnp == NULL)
+ ds->user_mii_bus = bus;
+
bus->priv = priv;
bus->name = KBUILD_MODNAME "-mii";
snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
@@ -2177,7 +2183,8 @@ mt7530_setup_mdio(struct mt7530_priv *priv)
if (priv->irq)
mt7530_setup_mdio_irq(priv);
- ret = devm_mdiobus_register(dev, bus);
+ ret = devm_of_mdiobus_register(dev, bus, mnp);
+ of_node_put(mnp);
if (ret) {
dev_err(dev, "failed to register MDIO bus: %d\n", ret);
if (priv->irq)
If the MDIO bus of the switch is defined on the devicetree, the
(!ds->user_mii_bus && ds->ops->phy_read) check in dsa_switch_setup will be
true so the MDIO bus will be attempted to be registered again, resulting in
a kernel panic.
[ 1.369012] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[ 1.391552] CPU 0 Unable to handle kernel paging request at virtual address 00000700, epc == 802eb948, ra == 802eb938
[ 1.402205] Oops[#1]:
[ 1.404481] CPU: 0 PID: 26 Comm: kworker/u5:1 Not tainted 6.7.0-rc6-next-20231222-00012-g9997041f4e67-dirty #281
[ 1.414622] Hardware name: UniElec U7621-06 (16M flash)
[ 1.419829] Workqueue: events_unbound deferred_probe_work_func
[ 1.425664] $ 0 : 00000000 00000001 00000011 00000700
[ 1.430895] $ 4 : 00000700 814d0000 00000000 00000000
[ 1.436123] $ 8 : 00000001 00000011 00000011 81595a80
[ 1.441353] $12 : 81595a80 81595ad8 81595a80 81595ad8
[ 1.446585] $16 : 81589a80 00000000 82019000 81589600
[ 1.451815] $20 : 807d4a88 8205a280 00000005 00000000
[ 1.457045] $24 : 00000000 802efd60
[ 1.462274] $28 : 81594000 81595c18 80760000 802eb938
[ 1.467505] Hi : 00000000
[ 1.470371] Lo : 00000000
[ 1.473235] epc : 802eb948 mt753x_setup+0x39c/0x3bc
[ 1.478283] ra : 802eb938 mt753x_setup+0x38c/0x3bc
[ 1.483324] Status: 11000403 KERNEL EXL IE
[ 1.487508] Cause : 4080000c (ExcCode 03)
[ 1.491502] BadVA : 00000700
[ 1.494367] PrId : 0001992f (MIPS 1004Kc)
[ 1.498446] Process kworker/u5:1 (pid: 26, threadinfo=(ptrval), task=(ptrval), tls=00000000)
[ 1.506853] Stack : 7fffffff 00000000 8205a280 00000000 806a8ab8 81589a80 8205a280 81521f00
[ 1.515224] 81521f08 8157dc00 806ba49c 8205a280 00000001 804c6374 81589e00 81589c80
[ 1.523601] 806a5ed0 81589600 00000000 81595c9c 805cab30 806d0000 8069e96c 806b99cc
[ 1.531971] 00000006 00000dc0 ffffffff 802bd188 81589600 802bd29c fffffff4 fffffff4
[ 1.540341] 8205a480 807d339c 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.548707] ...
[ 1.551150] Call Trace:
[ 1.553583] [<802eb948>] mt753x_setup+0x39c/0x3bc
[ 1.558286] [<804c6374>] dsa_register_switch+0x924/0xcc4
[ 1.563592] [<802ddad0>] mdio_probe+0x34/0x6c
[ 1.567943] [<802b95d0>] really_probe+0x16c/0x2dc
[ 1.572639] [<802b995c>] driver_probe_device+0x40/0xd0
[ 1.577767] [<802b9a4c>] __device_attach_driver+0x60/0xe8
[ 1.583154] [<802b7694>] bus_for_each_drv+0xc8/0xf4
[ 1.588042] [<802b9d8c>] __device_attach+0xd8/0x14c
[ 1.592912] [<802b831c>] bus_probe_device+0x48/0xd8
[ 1.597788] [<802b8f5c>] deferred_probe_work_func+0xb4/0xcc
[ 1.603348] [<8003ab1c>] process_scheduled_works+0x1dc/0x2b8
[ 1.609015] [<8003b1b0>] worker_thread+0x2dc/0x330
[ 1.613804] [<80041d4c>] kthread+0xf8/0x100
[ 1.617996] [<80002a18>] ret_from_kernel_thread+0x14/0x1c
[ 1.623385]
[ 1.624869] Code: 8ea30030 00042080 00641821 <ac620000> 26310001 1636fff1 00003825 1000ff67 02803025
[ 1.634638]
[ 1.636435] ---[ end trace 0000000000000000 ]---
Arınç
Powered by blists - more mailing lists