linux-kernel - Re: [PATCH] Bluetooth: btrtl: Add the support for RTL8852BT/RTL8852BE-VT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e9586bad-0101-415e-ba34-390fd34bf252@molgen.mpg.de>
Date: Tue, 26 Dec 2023 09:38:53 +0100
From: Paul Menzel <pmenzel@...gen.mpg.de>
To: Max Chou <max.chou@...ltek.com>
Cc: marcel@...tmann.org, johan.hedberg@...il.com, luiz.dentz@...il.com,
 linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
 alex_lu@...lsil.com.cn, hildawu@...ltek.com, karenhsu@...ltek.com
Subject: Re: [PATCH] Bluetooth: btrtl: Add the support for
 RTL8852BT/RTL8852BE-VT

Dear Max,


Thank you for your patch.

Am 26.12.23 um 02:57 schrieb max.chou@...ltek.com:
> From: Max Chou <max.chou@...ltek.com>
> 
> Add the support for RTL8852BT/RTL8852BE-VT BT controller on USB interface.

It’d be great if you stated, how it differs from the existing devices. 
Judging from your diff, only the ids need to be added.

> The necessary firmware will be submitted to linux-firmware project.
> 
> The device info from /sys/kernel/debug/usb/devices as below.
> 
> T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  8 Spd=12   MxCh= 0
> D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=0bda ProdID=8520 Rev= 0.00
> S:  Manufacturer=Realtek
> S:  Product=Bluetooth Radio
> S:  SerialNumber=00e04c000001
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> 
> Signed-off-by: Max Chou <max.chou@...ltek.com>
> ---
>   drivers/bluetooth/btrtl.c | 14 ++++++++++++++
>   1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index 277d039ecbb4..cc50de69e8dc 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -69,6 +69,7 @@ enum btrtl_chip_id {
>   	CHIP_ID_8852B = 20,
>   	CHIP_ID_8852C = 25,
>   	CHIP_ID_8851B = 36,
> +	CHIP_ID_8852BT = 47,
>   };
>   
>   struct id_table {
> @@ -307,6 +308,15 @@ static const struct id_table ic_id_table[] = {
>   	  .fw_name  = "rtl_bt/rtl8851bu_fw",
>   	  .cfg_name = "rtl_bt/rtl8851bu_config",
>   	  .hw_info  = "rtl8851bu" },
> +
> +	/* 8852BT/8852BE-VT */
> +	{ IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB),
> +	  .config_needed = false,
> +	  .has_rom_version = true,
> +	  .has_msft_ext = true,
> +	  .fw_name  = "rtl_bt/rtl8852btu_fw",
> +	  .cfg_name = "rtl_bt/rtl8852btu_config",
> +	  .hw_info  = "rtl8852btu" },
>   	};
>   
>   static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
> @@ -645,6 +655,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
>   		{ RTL_ROM_LMP_8852A, 20 },	/* 8852B */
>   		{ RTL_ROM_LMP_8852A, 25 },	/* 8852C */
>   		{ RTL_ROM_LMP_8851B, 36 },	/* 8851B */
> +		{ RTL_ROM_LMP_8852A, 47 },	/* 8852BT */
>   	};
>   
>   	if (btrtl_dev->fw_len <= 8)
> @@ -1275,6 +1286,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
>   	case CHIP_ID_8852B:
>   	case CHIP_ID_8852C:
>   	case CHIP_ID_8851B:
> +	case CHIP_ID_8852BT:
>   		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
>   		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
>   
> @@ -1505,6 +1517,8 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852btu_fw.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin");

Should btu be ordered before bu?

>   MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");


Kind regards,

Paul