| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <342bf5a0-8454-4fd6-be45-462f1e31e606@quicinc.com>
Date: Tue, 26 Dec 2023 14:56:58 -0800
From: Jessica Zhang <quic_jesszhan@...cinc.com>
To: Manuel Traut <manut@...ka.net>,
Neil Armstrong
<neil.armstrong@...aro.org>,
Sam Ravnborg <sam@...nborg.org>,
Maarten
Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard
<mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie
<airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Rob Herring
<robh+dt@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Heiko Stuebner <heiko@...ech.de>,
Sandy Huang <hjc@...k-chips.com>, Mark Yao
<markyao0591@...il.com>,
Diederik de Haas <didi.debian@...ow.org>,
Segfault
<awarnecke002@...mail.com>,
Arnaud Ferraris <aferraris@...ian.org>, Danct12
<danct12@...eup.net>
CC: <dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-rockchip@...ts.infradead.org>
Subject: Re: [PATCH v2 2/4] drm/panel: Add driver for BOE TH101MB31IG002-28A
panel
On 12/23/2023 7:20 AM, Manuel Traut wrote:
> From: Alexander Warnecke <awarnecke002@...mail.com>
>
> The BOE TH101MB31IG002-28A panel is a WXGA panel.
> It is used in Pine64 Pinetab2 and PinetabV.
>
> Signed-off-by: Alexander Warnecke <awarnecke002@...mail.com>
> Signed-off-by: Manuel Traut <manut@...ka.net>
> ---
> drivers/gpu/drm/panel/Kconfig | 11 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-boe-th101mb31ig002-28a.c | 348 +++++++++++++++++++++
> 3 files changed, 360 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 99e14dc212ec..927ddd10e688 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -67,6 +67,17 @@ config DRM_PANEL_BOE_HIMAX8279D
> 24 bit RGB per pixel. It provides a MIPI DSI interface to
> the host and has a built-in LED backlight.
>
> +config DRM_PANEL_BOE_TH101MB31UIG002_28A
> + tristate "Boe TH101MB31UIG002-28A panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for Boe
> + TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
> + resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
> + interface to the host and has a built-in LED backlight.
> +
> config DRM_PANEL_BOE_TV101WUM_NL6
> tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index d10c3de51c6d..dd6e1ac9d0a2 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.
> obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o
> obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
> obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
> +obj-$(CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A) += panel-boe-th101mb31ig002-28a.o
> obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
> obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
> obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
> diff --git a/drivers/gpu/drm/panel/panel-boe-th101mb31ig002-28a.c b/drivers/gpu/drm/panel/panel-boe-th101mb31ig002-28a.c
> new file mode 100644
> index 000000000000..ffe4047b7434
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-boe-th101mb31ig002-28a.c
> @@ -0,0 +1,348 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023 Alexander Warnecke <awarnecke002@...mail.com>
> + * Copyright (c) 2023 Manuel Traut <manut@...ka.net>
> + * Copyright (c) 2023 Dang Huynh <danct12@...eup.net>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +struct boe_th101mb31ig002 {
> + struct drm_panel panel;
> + bool enabled;
> + bool prepared;
Hi Manuel,
Sorry, I responded to the v1 instead of the latest version. Carrying my
comment over to here:
If I remember correctly, commit d2aacaf07395bd798373cbec6af05fff4147aff3
should have introduced prepared/enabled do the drm_panel struct.
Thanks,
Jessica Zhang
> +
> + struct mipi_dsi_device *dsi;
> +
> + struct regulator *power;
> + struct gpio_desc *enable;
> + struct gpio_desc *reset;
> +
> + enum drm_panel_orientation orientation;
> +};
> +
> +static void boe_th101mb31ig002_reset(struct boe_th101mb31ig002 *ctx)
> +{
> + gpiod_direction_output(ctx->reset, 0);
> + usleep_range(10, 100);
> + gpiod_direction_output(ctx->reset, 1);
> + usleep_range(10, 100);
> + gpiod_direction_output(ctx->reset, 0);
> + usleep_range(5000, 6000);
> +}
> +
> +static int boe_th101mb31ig002_enable(struct drm_panel *panel)
> +{
> + struct boe_th101mb31ig002 *ctx = container_of(panel,
> + struct boe_th101mb31ig002,
> + panel);
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + if (ctx->enabled)
> + return 0;
> +
> + mipi_dsi_dcs_write_seq(dsi, 0xE0, 0xAB, 0xBA);
> + mipi_dsi_dcs_write_seq(dsi, 0xE1, 0xBA, 0xAB);
> + mipi_dsi_dcs_write_seq(dsi, 0xB1, 0x10, 0x01, 0x47, 0xFF);
> + mipi_dsi_dcs_write_seq(dsi, 0xB2, 0x0C, 0x14, 0x04, 0x50, 0x50, 0x14);
> + mipi_dsi_dcs_write_seq(dsi, 0xB3, 0x56, 0x53, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xB4, 0x33, 0x30, 0x04);
> + mipi_dsi_dcs_write_seq(dsi, 0xB6, 0xB0, 0x00, 0x00, 0x10, 0x00, 0x10,
> + 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xB8, 0x05, 0x12, 0x29, 0x49, 0x48, 0x00,
> + 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xB9, 0x7C, 0x65, 0x55, 0x49, 0x46, 0x36,
> + 0x3B, 0x24, 0x3D, 0x3C, 0x3D, 0x5C, 0x4C,
> + 0x55, 0x47, 0x46, 0x39, 0x26, 0x06, 0x7C,
> + 0x65, 0x55, 0x49, 0x46, 0x36, 0x3B, 0x24,
> + 0x3D, 0x3C, 0x3D, 0x5C, 0x4C, 0x55, 0x47,
> + 0x46, 0x39, 0x26, 0x06);
> + mipi_dsi_dcs_write_seq(dsi, 0x00, 0xFF, 0x87, 0x12, 0x34, 0x44, 0x44,
> + 0x44, 0x44, 0x98, 0x04, 0x98, 0x04, 0x0F,
> + 0x00, 0x00, 0xC1);
> + mipi_dsi_dcs_write_seq(dsi, 0xC1, 0x54, 0x94, 0x02, 0x85, 0x9F, 0x00,
> + 0x7F, 0x00, 0x54, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xC2, 0x17, 0x09, 0x08, 0x89, 0x08, 0x11,
> + 0x22, 0x20, 0x44, 0xFF, 0x18, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xC3, 0x86, 0x46, 0x05, 0x05, 0x1C, 0x1C,
> + 0x1D, 0x1D, 0x02, 0x1F, 0x1F, 0x1E, 0x1E,
> + 0x0F, 0x0F, 0x0D, 0x0D, 0x13, 0x13, 0x11,
> + 0x11, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xC4, 0x07, 0x07, 0x04, 0x04, 0x1C, 0x1C,
> + 0x1D, 0x1D, 0x02, 0x1F, 0x1F, 0x1E, 0x1E,
> + 0x0E, 0x0E, 0x0C, 0x0C, 0x12, 0x12, 0x10,
> + 0x10, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xC6, 0x2A, 0x2A);
> + mipi_dsi_dcs_write_seq(dsi, 0xC8, 0x21, 0x00, 0x31, 0x42, 0x34, 0x16);
> + mipi_dsi_dcs_write_seq(dsi, 0xCA, 0xCB, 0x43);
> + mipi_dsi_dcs_write_seq(dsi, 0xCD, 0x0E, 0x4B, 0x4B, 0x20, 0x19, 0x6B,
> + 0x06, 0xB3);
> + mipi_dsi_dcs_write_seq(dsi, 0xD2, 0xE3, 0x2B, 0x38, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xD4, 0x00, 0x01, 0x00, 0x0E, 0x04, 0x44,
> + 0x08, 0x10, 0x00, 0x00, 0x00);
> + mipi_dsi_dcs_write_seq(dsi, 0xE6, 0x80, 0x01, 0xFF, 0xFF, 0xFF, 0xFF,
> + 0xFF, 0xFF);
> + mipi_dsi_dcs_write_seq(dsi, 0xF0, 0x12, 0x03, 0x20, 0x00, 0xFF);
> + mipi_dsi_dcs_write_seq(dsi, 0xF3, 0x00);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> + return ret;
> + }
> +
> + msleep(120);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set panel on: %d\n", ret);
> + return ret;
> + }
> +
> + ctx->enabled = true;
> +
> + return 0;
> +}
> +
> +static int boe_th101mb31ig002_disable(struct drm_panel *panel)
> +{
> + struct boe_th101mb31ig002 *ctx = container_of(panel,
> + struct boe_th101mb31ig002,
> + panel);
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + if (!ctx->enabled)
> + return 0;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0)
> + dev_err(dev, "Failed to set panel off: %d\n", ret);
> +
> + msleep(120);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0)
> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> +
> + ctx->enabled = false;
> +
> + return 0;
> +}
> +
> +static int boe_th101mb31ig002_unprepare(struct drm_panel *panel)
> +{
> + struct boe_th101mb31ig002 *ctx = container_of(panel,
> + struct boe_th101mb31ig002,
> + panel);
> +
> + if (!ctx->prepared)
> + return 0;
> +
> + gpiod_set_value_cansleep(ctx->reset, 1);
> + gpiod_set_value_cansleep(ctx->enable, 0);
> + regulator_disable(ctx->power);
> +
> + ctx->prepared = false;
> +
> + return 0;
> +}
> +
> +static int boe_th101mb31ig002_prepare(struct drm_panel *panel)
> +{
> + struct boe_th101mb31ig002 *ctx = container_of(panel,
> + struct boe_th101mb31ig002,
> + panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + if (ctx->prepared)
> + return 0;
> +
> + ret = regulator_enable(ctx->power);
> + if (ret) {
> + dev_err(dev, "Failed to enable power supply: %d\n", ret);
> + return ret;
> + }
> +
> + gpiod_set_value_cansleep(ctx->enable, 1);
> + msleep(50);
> + boe_th101mb31ig002_reset(ctx);
> + boe_th101mb31ig002_enable(panel);
> +
> + ctx->prepared = true;
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode boe_th101mb31ig002_default_mode = {
> + .clock = 73500,
> + .hdisplay = 800,
> + .hsync_start = 800 + 64,
> + .hsync_end = 800 + 64 + 16,
> + .htotal = 800 + 64 + 16 + 64,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 2,
> + .vsync_end = 1280 + 2 + 4,
> + .vtotal = 1280 + 2 + 4 + 12,
> + .width_mm = 135,
> + .height_mm = 216,
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +};
> +
> +static int boe_th101mb31ig002_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct boe_th101mb31ig002 *ctx = container_of(panel,
> + struct boe_th101mb31ig002,
> + panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev,
> + &boe_th101mb31ig002_default_mode);
> + if (!mode) {
> + dev_err(panel->dev, "Failed to add mode %ux%u@%u\n",
> + boe_th101mb31ig002_default_mode.hdisplay,
> + boe_th101mb31ig002_default_mode.vdisplay,
> + drm_mode_vrefresh(&boe_th101mb31ig002_default_mode));
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + connector->display_info.bpc = 8;
> + connector->display_info.width_mm = mode->width_mm;
> + connector->display_info.height_mm = mode->height_mm;
> +
> + /*
> + * TODO: Remove once all drm drivers call
> + * drm_connector_set_orientation_from_panel()
> + */
> + drm_connector_set_panel_orientation(connector, ctx->orientation);
> +
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static enum drm_panel_orientation
> +boe_th101mb31ig002_get_orientation(struct drm_panel *panel)
> +{
> + struct boe_th101mb31ig002 *ctx = container_of(panel,
> + struct boe_th101mb31ig002,
> + panel);
> +
> + return ctx->orientation;
> +}
> +
> +static const struct drm_panel_funcs boe_th101mb31ig002_funcs = {
> + .prepare = boe_th101mb31ig002_prepare,
> + .unprepare = boe_th101mb31ig002_unprepare,
> + .enable = boe_th101mb31ig002_enable,
> + .disable = boe_th101mb31ig002_disable,
> + .get_modes = boe_th101mb31ig002_get_modes,
> + .get_orientation = boe_th101mb31ig002_get_orientation,
> +};
> +
> +static int boe_th101mb31ig002_dsi_probe(struct mipi_dsi_device *dsi)
> +{
> + struct boe_th101mb31ig002 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->enabled = false;
> + ctx->prepared = false;
> +
> + mipi_dsi_set_drvdata(dsi, ctx);
> + ctx->dsi = dsi;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_NO_EOT_PACKET |
> + MIPI_DSI_MODE_LPM;
> +
> + ctx->power = devm_regulator_get(&dsi->dev, "power");
> + if (IS_ERR(ctx->power))
> + return dev_err_probe(&dsi->dev, PTR_ERR(ctx->power),
> + "Failed to get power regulator\n");
> +
> + ctx->enable = devm_gpiod_get(&dsi->dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->enable))
> + return dev_err_probe(&dsi->dev, PTR_ERR(ctx->enable),
> + "Failed to get enable GPIO\n");
> +
> + ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(ctx->reset))
> + return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
> + "Failed to get reset GPIO\n");
> +
> + ret = of_drm_get_panel_orientation(dsi->dev.of_node,
> + &ctx->orientation);
> + if (ret)
> + return dev_err_probe(&dsi->dev, ret,
> + "Failed to get orientation\n");
> +
> + drm_panel_init(&ctx->panel, &dsi->dev, &boe_th101mb31ig002_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + ret = drm_panel_of_backlight(&ctx->panel);
> + if (ret)
> + return ret;
> +
> + drm_panel_add(&ctx->panel);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err_probe(&dsi->dev, ret,
> + "Failed to attach panel to DSI host\n");
> + drm_panel_remove(&ctx->panel);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void boe_th101mb31ig002_dsi_remove(struct mipi_dsi_device *dsi)
> +{
> + struct boe_th101mb31ig002 *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + mipi_dsi_detach(dsi);
> + drm_panel_remove(&ctx->panel);
> +}
> +
> +static const struct of_device_id boe_th101mb31ig002_of_match[] = {
> + { .compatible = "boe,th101mb31ig002-28a", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, boe_th101mb31ig002_of_match);
> +
> +static struct mipi_dsi_driver boe_th101mb31ig002_driver = {
> + .driver = {
> + .name = "boe-th101mb31ig002-28a",
> + .of_match_table = boe_th101mb31ig002_of_match,
> + },
> + .probe = boe_th101mb31ig002_dsi_probe,
> + .remove = boe_th101mb31ig002_dsi_remove,
> +};
> +module_mipi_dsi_driver(boe_th101mb31ig002_driver);
> +
> +MODULE_AUTHOR("Alexander Warnecke <awarnecke002@...mail.com>");
> +MODULE_DESCRIPTION("BOE TH101MB31IG002-28A MIPI-DSI LCD panel");
> +MODULE_LICENSE("GPL");
>
> --
> 2.43.0
>
Powered by blists - more mailing lists