linux-kernel - [PATCH v4 1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231227060316.8539-1-chunfeng.yun@mediatek.com>
Date: Wed, 27 Dec 2023 14:03:14 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, Rob Herring
	<robh+dt@...nel.org>, Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@...aro.org>, AngeloGioacchino Del Regno
	<angelogioacchino.delregno@...labora.com>
CC: Chunfeng Yun <chunfeng.yun@...iatek.com>, Conor Dooley
	<conor+dt@...nel.org>, Matthias Brugger <matthias.bgg@...il.com>, "Mathias
 Nyman" <mathias.nyman@...el.com>, <linux-usb@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <linux-mediatek@...ts.infradead.org>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>, Eddie Hung
	<eddie.hung@...iatek.com>, Macpaul Lin <macpaul.lin@...iatek.com>
Subject: [PATCH v4 1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue

For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it
still send out unexpected ACK after receiving a short packet in burst
transfer, this will cause an exception on connected device, specially for
a 4k camera.
Add a quirk property "rx-fifo-depth" to work around this hardware issue,
prefer to use 3k bytes;
The side-effect is that may cause performance drop about 10%, including
bulk transfer.

Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
v4: change rx-fifo size in bytes
v3: add fifo depth unit, change the value range from 0-3 to 1-4
v2: change 'mediatek,rxfifo-depth' to 'rx-fifo-depth'
---
 .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml    | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index e9644e333d78..9f621f2209df 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -124,6 +124,17 @@ properties:
       defined in the xHCI spec on MTK's controller.
     default: 5000
 
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      It is a quirk used to work around Gen1 isoc-in endpoint transfer issue
+      that still send out unexpected ACK after device finish the burst transfer
+      with a short packet and cause an exception, specially on a 4K camera
+      device, it happens on controller before about IPM v1.6.0; the side-effect
+      is that may cause performance drop about 10%, include bulk transfer,
+      prefer to use 3k here. The size is in bytes.
+    enum: [1024, 2048, 3072, 4096]
+
   # the following properties are only used for case 1
   wakeup-source:
     description: enable USB remote wakeup, see power/wakeup-source.txt
-- 
2.18.0