[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231227044347.107291-1-arinc.unal@arinc9.com>
Date: Wed, 27 Dec 2023 07:43:40 +0300
From: Arınç ÜNAL <arinc.unal@...nc9.com>
To: Arınç ÜNAL <arinc.unal@...nc9.com>,
Daniel Golle <daniel@...rotopia.org>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Russell King <linux@...linux.org.uk>
Cc: Frank Wunderlich <frank-w@...lic-files.de>,
Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
mithat.guner@...ont.com,
erkin.bozoglu@...ont.com,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: [PATCH net-next v2 0/7] MT7530 DSA Subdriver Improvements Act I
Hello!
This patch series simplifies the MT7530 DSA subdriver and improves the
logic of the support for MT7530, MT7531, and the switch on the MT7988 SoC.
I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.
MT7621 Unielec, MCM MT7530:
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000
MT7622 Bananapi, MT7531:
gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb
tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000
MT7623 Bananapi, standalone MT7530:
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000
This patch series is the continuation of the patch series linked below.
https://lore.kernel.org/netdev/20230522121532.86610-1-arinc.unal@arinc9.com/
v1: https://lore.kernel.org/netdev/20231118123205.266819-1-arinc.unal@arinc9.com/
Arınç
v2:
- Shorten the patch series, include only 7 patches.
- Add the reviewed-by tags given.
- Patch 1
- Change variable ordering of mt753x_conduit_state_change().
- Define the mask variable and store BIT(cpu_dp->index) on it.
- Disable CPU_EN if priv->active_cpu_ports is 0.
- Patch 5
- On the patch log, take the irrelevant information about the
mt7530_setup_port5() call from mt7530_setup() out.
- Patch 6
- Change the patch log to reflect correct information.
Arınç ÜNAL (7):
net: dsa: mt7530: always trap frames to active CPU port on MT7530
net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel
net: dsa: mt7530: store port 5 SGMII capability of MT7531
net: dsa: mt7530: improve comments regarding port 5 and 6
net: dsa: mt7530: improve code path for setting up port 5
net: dsa: mt7530: do not set priv->p5_interface on mt7530_setup_port5()
net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled
drivers/net/dsa/mt7530-mdio.c | 7 +-
drivers/net/dsa/mt7530.c | 139 +++++++++++++++++++++----------------
drivers/net/dsa/mt7530.h | 16 +++--
3 files changed, 91 insertions(+), 71 deletions(-)
Powered by blists - more mailing lists