linux-kernel - [PATCH 3/3] ACPI: cpufreq: Add ITMT support when CPPC enabled for Zhaoxin CPUs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231228075705.26652-4-TonyWWang-oc@zhaoxin.com>
Date: Thu, 28 Dec 2023 15:57:05 +0800
From: Tony W Wang-oc <TonyWWang-oc@...oxin.com>
To: <rafael@...nel.org>, <lenb@...nel.org>, <robert.moore@...el.com>,
	<linux-acpi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<acpica-devel@...ts.linux.dev>, <tglx@...utronix.de>, <mingo@...hat.com>,
	<bp@...en8.de>, <dave.hansen@...ux.intel.com>, <x86@...nel.org>,
	<hpa@...or.com>, <mcgrof@...nel.org>, <peterz@...radead.org>,
	<j.granados@...sung.com>, <TonyWWang-oc@...oxin.com>,
	<ricardo.neri-calderon@...ux.intel.com>, <viresh.kumar@...aro.org>,
	<linux-pm@...r.kernel.org>
CC: <CobeChen@...oxin.com>, <TimGuo@...oxin.com>, <LeoLiu-oc@...oxin.com>,
	<LindaChai@...oxin.com>
Subject: [PATCH 3/3] ACPI: cpufreq: Add ITMT support when CPPC enabled for Zhaoxin CPUs

For Zhaoxin CPUs, the cores' highest frequencies may be different, which
means that cores may run at different max frequencies,

According to ACPI-spec6 chapter 8.4.7, the per-core highest frequency
value can be obtained via cppc.

The core with the higher frequency have better performance, which can be
called as preferred core. And better performance can be achieved by
making the scheduler to run tasks on these preferred cores.

The cpufreq driver can use the highest frequency value as the prioriy of
core to make the scheduler try to get better performace. More specifically,
in the acpi-cpufreq driver use cppc_get_highest_perf() to get highest
frequency value of each core, use sched_set_itmt_core_prio() to set
highest frequency value as core priority, and use sched_set_itmt_support()
provided by ITMT to tell the scheduler to favor on the preferred cores.

Signed-off-by: Tony W Wang-oc <TonyWWang-oc@...oxin.com>
---
 drivers/cpufreq/acpi-cpufreq.c | 56 +++++++++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 37f1cdf46d29..f4c1ff9e4bb0 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -663,8 +663,56 @@ static u64 get_max_boost_ratio(unsigned int cpu)
 
 	return div_u64(highest_perf << SCHED_CAPACITY_SHIFT, nominal_perf);
 }
+
+/* The work item is needed to avoid CPU hotplug locking issues */
+static void sched_itmt_work_fn(struct work_struct *work)
+{
+	sched_set_itmt_support();
+}
+
+static DECLARE_WORK(sched_itmt_work, sched_itmt_work_fn);
+
+static void set_itmt_prio(int cpu)
+{
+	static bool cppc_highest_perf_diff;
+	static struct cpumask core_prior_mask;
+	u64 highest_perf;
+	static u64 max_highest_perf = 0, min_highest_perf = U64_MAX;
+	int ret;
+
+	ret = cppc_get_highest_perf(cpu, &highest_perf);
+	if (ret)
+		return;
+
+	sched_set_itmt_core_prio(highest_perf, cpu);
+	cpumask_set_cpu(cpu, &core_prior_mask);
+
+	if (max_highest_perf <= min_highest_perf) {
+		if (highest_perf > max_highest_perf)
+			max_highest_perf = highest_perf;
+
+		if (highest_perf < min_highest_perf)
+			min_highest_perf = highest_perf;
+
+		if (max_highest_perf > min_highest_perf) {
+			/*
+			 * This code can be run during CPU online under the
+			 * CPU hotplug locks, so sched_set_itmt_support()
+			 * cannot be called from here.  Queue up a work item
+			 * to invoke it.
+			 */
+			cppc_highest_perf_diff = true;
+		}
+	}
+
+	if (cppc_highest_perf_diff && cpumask_equal(&core_prior_mask, cpu_online_mask)) {
+		pr_debug("queue a work to set itmt enabled\n");
+		schedule_work(&sched_itmt_work);
+	}
+}
 #else
 static inline u64 get_max_boost_ratio(unsigned int cpu) { return 0; }
+static void set_itmt_prio(int cpu) { }
 #endif
 
 static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
@@ -677,7 +725,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	unsigned int valid_states = 0;
 	unsigned int result = 0;
 	u64 max_boost_ratio;
-	unsigned int i;
+	unsigned int i, j;
 #ifdef CONFIG_SMP
 	static int blacklisted;
 #endif
@@ -742,6 +790,12 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	}
 #endif
 
+	if (c->x86_vendor == X86_VENDOR_CENTAUR || c->x86_vendor == X86_VENDOR_ZHAOXIN) {
+		for_each_cpu(j, policy->cpus) {
+			set_itmt_prio(j);
+		}
+	}
+
 	/* capability check */
 	if (perf->state_count <= 1) {
 		pr_debug("No P-States\n");
-- 
2.25.1